Search

Search Results

1. Electrochemical model of anodic dissolution for magnesium nanoparticles

   The frontiers of material corrosion research are transitioning from macroscopic corrosion to the micro or even nanoscale. The presence of a...

   **uhan Li, Ju Rong, ... Yan Wei in Ionics

   Article 14 December 2023
   

2. Anodic Dissolution of Al in KOH Solutions in the Mixed Ethanol–Acetonitrile Solvent

   Abstract

   The effect of Ga and In compounds on the anodic dissolution of Al in the KOH solutions in the mixed ethanol–acetonitrile solvent is studied....

   K. V. Rybalka, L. A. Beketaeva in Russian Journal of Electrochemistry

   Article 01 December 2023
   

3. Effect of Passive Oxide Film Structure and Surface Temperature on the Rate of Anodic Dissolution of Chromium-Nickel and Titanium Alloys in Electrolytes for Electrochemical Machining: Part 2. Anodic Dissolution of Titanium Alloys in Nitrate and Chloride Solutions

   Abstract —

   Experimental study of the anodic dissolution of titanium and its alloys over a wide range of current densities, including pulsed currents...

   E. V. Likrizon, S. A. Silkin, A. I. Dikusar in Surface Engineering and Applied Electrochemistry

   Article 01 June 2023
   

4. Effect of the Structure of Passive Oxide Films and Surface Temperature on the Rate of Anodic Dissolution of Chromium–Nickel and Titanium Alloys in Electrolytes for Electrochemical Machining: Part 1. Anodic Dissolution of Chromium–Nickel Steel in a Nitrate Solution

   Abstract

   The anodic dissolution of type Kh18N10 (Cr18Ni10) chromium–nickel steel was performed in a nitrate solution (conductivity of 0.15 S/cm) under...

   A. I. Dikusar, E. V. Likrizon in Surface Engineering and Applied Electrochemistry

   Article 01 April 2023
   

5. Electrochemical behavior of In–DTPA complexes: anodic dissolution, cathodic reduction, and electrochemical nucleation

   In this paper, the influence of a chelating agent—diethylenetriaminepentaacetic acid (DTPA) on the anodic dissolution and cathodic deposition of...

   Akbayan Bekey, Gulzhan Lukpanovna Badavamova, ... Khaisa Avchukir in Journal of Solid State Electrochemistry

   Article 16 August 2023
   

6. Green production of titanium dioxide nanometric particles through electrolytic anodic dissolution of titanium metal

   Nanometric titanium derivatives such as hydroxide and dioxide compounds have a great attention because they are significant industrial material of...

   Hassan H. Shaarawy, Hala S. Hussein, ... Salwa I. Hawash in Environmental Science and Pollution Research

   Article Open access 05 November 2022
   

7. Effect of Ga³⁺ and In³⁺ Ions on the Anodic Dissolution of Aluminum in KOH Ethanol Solutions

   Abstract

   The anodic dissolution of aluminum in the KOH ethanol solutions is considered. It is shown that an addition of gallium and indium compounds...

   K. V. Rybalka, L. A. Beketaeva in Russian Journal of Electrochemistry

   Article 01 February 2023
   

8. Anodic dissolution mechanism of TA15 titanium alloy during counter-rotating electrochemical machining

   Counter-rotating electrochemical machining (CRECM) is a novel sha** method with advantages in processing revolving parts, especially engine...

   WenJian Cao, DengYong Wang, ... Di Zhu in Science China Technological Sciences

   Article 20 April 2022

9. Effect of oxalic acid (complexing agent) on anodic dissolution of Cobalt in hydrogen peroxide solutions: mechanism and kinetic analysis by electrochemical impedance spectroscopy

   The anodic dissolution of Cobalt in H ₂ O ₂ solution is investigated in the presence and absence of a complexing agent, oxalic acid, using various...

   Jenasree Hazarika, Anusuya Talukdar, Prasanna Venkatesh Rajaraman in Journal of Solid State Electrochemistry

   Article 17 January 2023
   

10. Anodic Dissolution of Surface Layers as a Means of Increasing the Microhardness of Alloy Coatings of Iron Group Metals with Tungsten Prepared by Induced Codeposition

    Abstract

    This work demonstrates that the macroscopic size effect, which consists in the influence of electrodeposition surface area on the composition...

    S. S. Belevskii, A. V. Gotelyak, ... A. I. Dikusar in Surface Engineering and Applied Electrochemistry

    Article 17 October 2023
    

11. Anodic dissolution of waste brass chips in sulfuric acid for the recovery of copper and zinc

    Regarding the low dissolution rate of brass in sulfuric acid under ordinary conditions in the absence of oxidative factors. The anodic dissolution...

    S. Vaghar, S. Ghasemi, M. Pourabdoli in International Journal of Environmental Science and Technology

    Article 17 June 2022
    

12. Formation and Breakdown of Oxide Films in High-Rate Anodic Dissolution of Chromium–Nickel Steels in Electrolytes for Electrochemical Machining

    Abstract

    It is shown that, in high-rate pulsed galvanostatic anodic dissolution of type CSN17335 and AISI 304 chromium–nickel steels in electrolytes...

    A. I. Dikusar, S. A. Silkin in Surface Engineering and Applied Electrochemistry

    Article 29 August 2022
    

13. Anodic Dissolution of Iron in the Solutions Simulating the Composition of Corrosive Exometabolites of Organotrophic Bacteria

    Abstract —Two Tafel regions with slopes of 0.06 and 0.09 V were observed on the dependences of the anodic dissolution of Fe in NaCl solutions with...

    V. I. Naumov, A. A. Kalinina, ... A. V. Borisov in Protection of Metals and Physical Chemistry of Surfaces

    Article 27 December 2021
    

14. Activation of Anodic Dissolution of the Mn₅Si₃ Electrode by Fluoride Ions in a Sulfuric Acid Solution

    Abstract

    The anodic dissolution of the Mn ₅ Si ₃ electrode in 0.5 M H ₂ SO ₄ + (0.0025–0.05) M NaF solutions is studied by the methods of polarization,...

    I. S. Polkovnikov, V. V. Panteleeva, A. B. Shein in Protection of Metals and Physical Chemistry of Surfaces

    Article 27 December 2021
    

15. Unraveling the Chloride Penetration Dissolution Mechanism of High-Grade Nickel Matte During Anodic Oxidation

    The beneficial effect of chloride on the leaching of nickel matte by sulfuric acid has been found in hydrometallurgy, but its mechanism has not been...

    Chuncheng Zhu, **nbo Hu, ... **onggang Lu in JOM

    Article 20 May 2022
    

16. Anodic Processes of Uranium Alloys Containing Palladium and Neodymium in 3LiCl–2KCl–UCl₃ Melts

    Abstract

    A combined technological scheme for the reprocessing of a mixed nitride uranium–plutonium spent fuel, which consists of pyrochemical...

    D. I. Nikitin, I. B. Polovov, ... A. S. Dedyukhin in Russian Metallurgy (Metally)

    Article 01 August 2023
    

17. Composition and growth mechanism of nanoporous anodic fluoride films on stainless steel

    Anodizing of 304L stainless steel performed in ethylene glycol solution containing 0.1 M NH ₄ F and 0.1 M H ₂ O at constant voltage under static...

    A. Conde, D. Voces, ... M. A. Arenas in Journal of Applied Electrochemistry

    Article Open access 07 August 2023
    

18. Selective Anodic Dissolution of an Ag_0.58Au_0.37Pd_0.05 Alloy in Molten Alkali Metal Chlorides over a Wide Temperature Range

    Abstract

    The formation of microporous metal structures during the electrochemical dealloying of a single-phase Ag _0.58 Au _0.37 Pd _0.05 alloy in the...

    L. V. Sitnikov, N. P. Kulik, ... B. D. Antonov in Russian Metallurgy (Metally)

    Article 01 February 2022
    

19. Multi-method characterization of anodic oxidation of a titanium alloy in fluoride-containing electrolytes

    Anodic film growth on a Ti alloy in water-containing ethylene glycol electrolyte with addition of fluoride (0.016–0.17 mol dm ⁻³ ) was investigated...

    Martin Bo**ov, Iva Betova, Vasil Karastoyanov in Journal of Solid State Electrochemistry

    Article 13 March 2023
    

20. Enhancing the formability of FeSi6.5 steel by the anodic polarization

    The effect of anodic polarization on the plastic deformation behavior and formability of FeSi6.5 steel at room temperature was experimentally...

    Dong Zhao, Feng Ye, ... Roni Shneck in International Journal of Minerals, Metallurgy and Materials

    Article 08 August 2022