Search

Search Results

1. Hardness and Impact Fracture Behavior of Armor Weldment Using Austenitic Stainless Steel Filler

   Welding of high-carbon armor steel is a complex procedure, and there is a possibility of welding flaws in the weld zone as cracks and pores. When...

   N. Vimal Kumar, M. Uthayakumar, ... A. Velayudham in Human Factors and Mechanical Engineering for Defense and Safety

   Article 19 November 2022
   

2. Impact toughness of Fe–Mn-Al-C austenitic low-density steel solution treated at different temperatures

   The present study explored the impact fracture behavior of a Fe–25Mn–10Al–1.1C austenitic low-density steel solution treated at two temperatures....

   Zhiqi **e, Weijun Hui, ... **aoli Zhao in Journal of Materials Science

   Article 01 January 2023
   

3. Coating weld cavitation erosion resistance using austenitic stainless steel and cobalt alloys deposited by GMAW and CW-GMAW

   The repair processes more utilized in hydraulic turbines are welding, the Cold-Wire-Gas Metal Arc Welding (CW-GMAW) process, which adds a...

   Fabio Gonçalves da Silva, Eduardo M. Braga, ... Demostenes Ferreira Filho in Journal of the Brazilian Society of Mechanical Sciences and Engineering

   Article 02 November 2022
   

4. Experimental Investigation on EN 19 Substrate Weld Cladded with Austenitic Stainless Steel for Improvement of Material Properties

   The microstructure and other material properties like hardness, wear resistance and corrosion resistance are studied and compared between non-cladded...

   R. Paullinga Prakash, S. Palani, ... M. Selvam in Materials, Design and Manufacturing for Sustainable Environment

   Conference paper 2023
   

5. Effect of cerium on microstructure, eutectic carbides and Laves phase in electroslag remelted 15Cr–22Ni–1Nb austenitic heat-resistant steel

   The dendrites, eutectic carbides, Laves phase and microsegregation of alloying element in electroslag remelted 15Cr–22Ni–1Nb austenitic...

   **n Zhu, Cheng-bin Shi, ... **g Li in Journal of Iron and Steel Research International

   Article 27 December 2022
   

6. Role of Dislocations and Deformation-Induced Martensite on Salt Bath Nitriding Response of Austenitic Stainless Steel

   The slow kinetics of low-temperature nitriding of stainless steels has motivated the researchers to apply severe plastic deformation techniques to...

   N. Jagadeesh, N. Kumar, ... S. R. Meka in Transactions of the Indian Institute of Metals

   Article 25 May 2023
   

7. Processing an 18Cr-8Ni Austenitic Stainless Steel Without the Dilemma of the Strength and Ductility Trade-Off

   The magnitude of the contribution of common strengthening mechanisms in two samples of heterogeneous structured 18Cr-8Ni austenitic stainless steel...

   Chengjie He, **aoxiong Zhu, ... Kaiming Wu in JOM

   Article 01 November 2023
   

8. The Influence of Frictional Treatment and Low-Temperature Plasma Carburizing on the Structure and Phase Composition of Metastable Austenitic Steel

   Abstract

   The features of the structure and phase composition of corrosion-resistant austenitic chromium–nickel steel (16.80 wt % Cr, 8.44 wt % Ni)...

   R. A. Savrai, P. A. Skorynina, ... V. S. Gaviko in Physics of Metals and Metallography

   Article Open access 01 May 2023
   

9. Development of a Novel Heat-Resistant Austenitic Cast Steel with an Improved Thermal Fatigue Resistance

   In this work, the Thermo-Calc software was used to evaluate the effect of the Nb and Mn additions on the thermal phases stability for a conventional...

   B. A. Martinez Carreon, M. O. Ramos Azpeitia, ... A. C. Gonzalez Castillo in International Journal of Metalcasting

   Article 07 July 2022
   

10. Revealing Magnetic Anisotropy in Austenitic Chromium–Nickel Steel After Rolling

    Abstract

    We study textures, phase composition, and magnetic anisotropy in austenitic samples deformed by rolling of 09Kh17N5Yu steel with the...

    M. B. Rigmant, N. V. Kazantseva, ... M. S. Karabanalov in Russian Journal of Nondestructive Testing

    Article 01 December 2021
    

11. Nano-Twinning and Martensitic Transformation Behaviors in 316L Austenitic Stainless Steel During Large Tensile Deformation

    The evolutions of nano-twins and martensitic transformation in 316L austenitic stainless steel during large tensile deformation were studied by...

    **-Wang Liu, **an Luo, ... Hong Wang in Acta Metallurgica Sinica (English Letters)

    Article 21 November 2022
    

12. Microstructure Evolution of Laser Welded 301LN and AISI 304 Austenitic Stainless Steel

    Cold-rolled plates of metastable austenitic stainless steel (SS) 301LN are the main materials for manufacturing lightweight railway passenger cars,...

    **qing Li, Wei Liu, ... Zhikun Song in Metallurgical and Materials Transactions A

    Article 08 February 2023
    

13. Deformation-Induced γ → α'-Martensitic Transformation in Austenitic Stainless Steel Obtained by Electron Beam Additive Manufacturing

    E. V. Mel’nikov, S. V. Astafurov, ... E. G. Astafurova in Steel in Translation

    Article 01 December 2022
    

14. Effect of Cooling Rate on δ-Ferrite Formation and Sigma Precipitation Behavior of 254SMO Super-Austenitic Stainless Steel During Solidification

    The formation of δ -ferrite and the precipitation behavior of the sigma phase during the solidification of 254SMO super-austenitic stainless steel...

    Yunong Li, Dening Zou, ... Wei Zhang in Metallurgical and Materials Transactions B

    Article 02 October 2023
    

15. Strengthening Mechanisms and Features of Strain Stages in High-Manganese Austenitic Hadfield Steel

    Abstract—

    The paper presents the study of the deformation effect on high-manganese austenitic Hadfield steel. The dependences of the flow stress and...

    N. A. Popova, A. A. Klopotov, ... A. I. Potekaev in Physics of the Solid State

    Article 01 October 2022
    

16. Effects of microstructure and texture after thermomechanical treatments on corrosion behavior of AISI 321 pipeline austenitic stainless steel

    In the present study, the effects of microstructure, grain size, and texture after thermomechanical processing on the corrosion behavior of AISI 321...

    M. Salehi, M. Eskandari, M. Yeganeh in Journal of Central South University

    Article 01 November 2022

17. Quantitative Characterization of Grain Boundaries in Ultrafine-Grained Austenitic Stainless Steel by Cluster Analysis

    Abstract

    A method is proposed for analyzing the relative energy distributions of grain boundaries in ultrafine-grained materials measured by grain...

    P. V. Kuznetsov, A. V. Stolbovsky, I. V. Belyaeva in Physical Mesomechanics

    Article 08 August 2023
    

18. A novel method for the strain strengthening of metastable austenitic stainless steel dome by deep cryogenic forming

    To enhance the strength of metastable austenitic stainless steel (ASS) sheet components, a novel method was proposed for the strengthening of a...

    Wangjun Cheng, Yue Zeng, ... Jiao Man in Archives of Civil and Mechanical Engineering

    Article 15 April 2024
    

19. Determination of austenitic steel alloys composition using laser-induced breakdown spectroscopy (LIBS) and machine learning algorithms

    Abstract

    In this paper, the determination of composition of certified samples of austenitic steel alloys was done by combining laser-induced breakdown...

    Ivan Traparić, Milivoje Ivković in The European Physical Journal D

    Article 22 February 2023
    

20. TRIP effect produced by cold rolling of austenitic stainless steel AISI 316L

    This study aims to study the transformation-induced plasticity (TRIP) by cold rolling in AISI 316L grade ASTM F138: 2019 (biomedical material) and...

    Ricardo Luiz Perez Teixeira, José Carlos de Lacerda, ... Andréia Bicalho Henriques in Journal of Materials Science

    Article 03 February 2023