Search
Search Results
-
Effect of Manganese Sulfide Inclusion Morphology on the Corrosion Resistance and Pitting Corrosion Behavior of Free-Cutting Austenitic Stainless Steel
The corrosion resistance and pitting corrosion behavior of free-cutting austenitic stainless steels with different contents of sulfur were...
-
Metallographic, structural and mechanical characterization of a low-density austenitic Fe–Mn–Al–C steel microalloyed with Nb in hot-rolling condition
The effect of the Nb addition (0.25 wt.%) on the microstructure and mechanical properties in hot-rolling condition was studied in an austenitic...
-
Effect of Deformation on the Magnetic Properties of C + N Austenitic Steel
In this investigation, the effect of deformation on magnetic properties at low temperatures of FeCr 18.2 Mn 18.9 –0.96C + N high interstitial steel was...
-
Microstructure Evolution on the Surface of Fe-20Mn-6Al-0.6C-0.15Si Austenitic Low-Density Steel during Heat Treatment
Microstructure evolution on the surface of Fe-20Mn-6Al-0.6C-0.15Si austenitic low-density steel was studied by comparing with the microstructure at...
-
Enhancement Mechanism of Cerium in 316LN Austenitic Stainless Steel During Creep at 700 °C
Effect of cerium (Ce) on creep strength and microstructure of 316LN austenitic stainless steel (316LN steel) at 700 °C/150 MPa was investigated by...
-
Temperature dependency of hydrogen-related impact energy degradation of type 304 austenitic stainless steel
The influence of hydrogen on the impact energy of 304 austenitic stainless steel (ASS) and the corresponding fracture mechanism were investigated at...
-
Effect of nitrogen content on corrosion behavior of high-nitrogen austenitic stainless steel
A series of electrochemical tests combined with the techniques of scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and...
-
Effect of the Degree of Plastic Deformation on Hardness of Austenitic Steel
A diagram of hardness change in 12KH18N10T austenitic steel depending on relative compression strain has been obtained. The relationship between the...
-
Investigation of the Surface Degradation Properties of Aluminized Super Austenitic Stainless Steel
The intermetallic compounds formed on the surface of a substrate via the aluminizing process significantly affect its hardness and oxidation...
-
Structural Changes upon Heating of Austenitic Stainless Steel Produced by Selective Laser Melting
Abstract—It has been found that austenitic stainless steel produced by selective laser melting undergoes successive recovery, polygonization, and...
-
Martensitic Transformation in AISI-316 Austenitic Steel During Thermomechanical Processing
The paper presents the study of the martensitic transformation in AISI-316 austenitic steel during high-pressure torsion in a new design tool at...
-
Effects of Mn content on austenite stability and mechanical properties of low Ni alumina-forming austenitic heat-resistant steel: a first-principles study
Low Ni alumina-forming austenitic (AFA) heat-resistant steel is an advanced high-temperature stainless steel with reduced cost, good machinability,...
-
Nanoindentation behavior and creep-induced cracking of long-term crept austenitic steel at 650 °C
The grain boundary (GB) damage of long-term crept HR3C (25Cr–20Ni–Nb–N) austenitic steel with solid solution state was investigated by...
-
Residual Stress Gradient Built in X40CrMoVN16-2 Austenitic Steel Cube Manufactured by Laser Powder Bed Fusion
Additive manufacturing processes and especially the family of laser powder bed fusion technologies have a great industrial potential since it...
-
Study of Microstructure and Properties of High-Strength Alloy Steel Welded Joints Made with Austenitic Flux-Cored Wire with Nitrogen
Results are presented for studies of deposited metal and welded joints of high-strength medium-alloy steels made by austenitic type flux-cored wire...
-
Effect of Grain Size on the Local Deformation Behavior Associated with the Discontinuous Yielding in a High Mn Austenitic Steel
The discontinuous characteristics of the yielding behavior in a high Mn austenitic steel was examined in specimens with different grain sizes. In the...
-
Microstructure-Sensitive Crystal Plasticity Modeling for Austenitic Steel and Nickel-Based Superalloy Under Isothermal Fatigue Loading
Intermittent mechanical loads combined with high temperatures appear during the operation of turbines in jet engines or in power plants, which can...
-
Effect of Ce on the Segregation and Secondary-Phase Precipitation During the Solidification of S31254 Super-Austenitic Stainless Steel
The influence of different amounts of cerium on inclusion evolution, solidification structure, elemental segregation, and intermetallic precipitation...
-
Optimization of process parameters for autogenous TIG welding of austenitic stainless-steel SS-304
This work presents the effect of process parameters viz., current, speed, gas flow rate, and arc gap on characteristics of austenitic stainless steel...
-
Evolution of Gradient Structure Under Heat Treatment of Metastable Austenitic Stainless Steel Subjected to Cold Radial Forging
The effect of heat treatment on the structure and mechanical properties of a metastable austenitic steel subjected initially to cold radial forging...