Search

Search Results

1. Formation of a Martensite-Austenite Constituent in Х65 Low-Carbon Steel Under Thermomechanical Treatment and Welding

   The features of formation of a martensite-austenite (M-A) constituent in the X65 steel after its helical rolling and laser welding are studied using...

   A. I. Gordienko, M. N. Volochaev, ... A. D. Panyukhina in Russian Physics Journal

   Article 01 October 2022

2. Principle Universality of Obtaining Metastable Austenite in the Alloy and Cast Iron Structure to Increase the Abrasive Wear Resistance

   Abstract

   In this paper, we demonstrate the principle universality of obtaining in the steel and cast iron structure, along with other constituents of...

   L. S. Malinov, V. L. Malinov, ... D. V. Burova in Journal of Friction and Wear

   Article 01 June 2022

3. Thermal Conductivity and Specific Heat Capacity of Austenite and Stress-Induced Martensite in Superelastic NiTi at Ambient Temperature

   Infrared thermography (IRT) and heat source reconstruction (HSR) were used in the study to measure two thermophysical properties of superelastic...

   A. Jury, X. Balandraud, L. Heller in International Journal of Thermophysics

   Article 25 October 2023
   

4. Isothermal Transformation Diagrams of Retained Austenite Formed after Annealing and Quenching in Maraging Steel

   Abstract

   In this paper, the γ → α transformation kinetics in cold-rolled maraging steel is studied in the temperature range of 0…–100°C. Based on...

   T. M. Makhneva, A. A. Sukhikh in Technical Physics

   Article 01 July 2022
   

5. Study of the stabilization of ordered austenite β₁ in Cu₇₉Al₁₉X₂ (X = Be or Mn) alloys

   The knowledge of the fundamentals that guide the well-known shape memory effect is fundamental for the development of devices that use this material...

   R. D. A. Pinto, R. A. G. Silva in The European Physical Journal Plus

   Article 22 June 2024
   

6. Kinetics of γ → α Transformation of Retained Austenite in Maraging Steel after Double Annealing at Subzero Temperatures and Loads

   Abstract

   This paper studies the influence of mechanical tensile loads in the range of 0–300 MPa on the nature of γ → α transformation in cold-rolled...

   T. M. Makhneva, V. B. Dementyev, A. A. Sukhikh in Technical Physics

   Article 01 July 2022
   

7. Microstructure, residual stress, and nanoindentation properties of GCr15-bearing steel by cryogenic treatment and laser-peening composite strengthening

   GCr15-bearing steel is widely used in generator bearings. To improve its mechanical properties, the cryogenic treatment and laser-peening (CT + LP)...

   Aixin Feng, Bingjie Liu, ... **aoming Pan in Applied Physics A

   Article 01 March 2023
   

8. The impact of energy density and process parameters on the distribution of residual stresses in additively manufactured stainless steel 316 L

   The current investigation involves the fabrication of fifteen samples of austenitic stainless steel 316 L (SS316L) utilizing laser powder bed fusion...

   R. Haribaskar, T. Sampath Kumar in Applied Physics A

   Article 18 June 2024
   

9. Investigating quench crack susceptibility in disc springs: a microstructural analysis of martensitic evolution and its implications

   The current investigation delves into the influence of varying cooling rates, encompassing water, rapid quenching oil, and air, on the quench crack...

   Mingwei Ma, **nyi Liu, ... Xu Wang in Applied Physics A

   Article 08 April 2024
   

10. Comparative Studies of the Structure and Residual Stresses Formed During Tantalum Alloying of TiNi Surface Layers by Ion- or Electron-Beam Method

    The effect of ion- or electron-beam treatment on the structure and residual stresses formed in the surface layers of the Ta-doped TiNi alloy was...

    M. G. Ostapenko, V. O. Semin, ... V. V. Loban’ in Russian Physics Journal

    Article 02 September 2023

11. Investigation of the characteristics of TiN-coating film deposited by arc ion plating method and the feasibility of measuring residual stress according to heat treatment

    TiN-coating films have excellent hardness, heat resistance, abrasion resistance, and corrosion resistance, and are used in a variety of applications,...

    Chang-Suk Han, Sung-Soon Park, Min-Gyu Chun in Journal of the Korean Physical Society

    Article 20 March 2024
    

12. Increasing the Wear Resistance of Graphitized Steel by Obtaining Metastable Austenite in the Structure

    Abstract —

    It is shown that the wear resistance of graphitized steel under abrasive action and dry sliding friction can be increased by heat treatment...

    L. S. Malinov, D. V. Burova, ... P. A. Yarovaya in Journal of Friction and Wear

    Article 01 March 2021
    

13. Electron Microscope Study of Phase Transformations in 316L Austenitic Steel Produced via Laser 3D Printing

    Abstract

    An analysis is performed of the structure and phases of porous samples of the 316L austenitic steel obtained via laser 3D printing. Residual...

    N. V. Kazantseva, N. I. Vinogradova, ... D. I. Davidov in Bulletin of the Russian Academy of Sciences: Physics

    Article 23 October 2023
    

14. Investigation of the effect of vacuum annealing on the tribological properties of the austenite stainless steel multilayer coatings

    The present work was dedicated to study the microstructural, mechanical, tribological and electrochemical properties of the 304L stainless steel...

    Khaled Chemaa, Salim Hassani, ... Brahim Idir in Applied Physics A

    Article 20 January 2022
    

15. Deformation and Fracture Behavior of Particle-Reinforced Metal Matrix Composites and Coatings

    Abstract

    This paper considers the deformation of Al/B ₄ C and NiTi/TiC composites and 6061T6 aluminum alloy with double-layer composite coatings...

    R. R. Balokhonov, V. A. Romanova, ... A. V. Zemlyanov in Physical Mesomechanics

    Article Open access 09 December 2022
    

16. The Metastability of Retained Austenite in Multiphase Steel during Abrasive Wear

    Abstract

    This article presents the results of a study of the effects of the amount and metastability of retained austenite on the abrasive wear...

    V. I. Zurnadzhy, V. G. Efremenko, ... R. A. Kussa in Journal of Friction and Wear

    Article 01 March 2020
    

17. Experimental Quantification of Barrier Effects for Microstructural Short Fatigue Crack Propagation in Martensitic Steel

    In the scope of the underlying study, microstructurally short fatigue crack propagation was observed and analyzed in a fully martensitic...

    Kevin Koschella, Ulrich Krupp in Progress in Structural Mechanics

    Chapter 2024
    

18. Stress–Strain State of Sheet Elements at One- and Two-Layer Build-Up with Liquid Metal

    The current and residual strain-stress state of sheet elements during one- and two-layer building-up (surfacing) with three steels under different...

    Ihor Senchenkov, Ihor Ryabtsev, ... Nina Yakovenko in Advances in Mechanics

    Chapter 2023
    

19. Crystallographic Characteristics of Phase Transformations in the Field of Medium-Carbon Steels of a Joint Obtained by Rotational Friction Welding

    Abstract

    The structure and orientational relationships of the α' and γ-phases in medium-carbon steels during rotational friction welding were studied...

    V. M. Schastlivtsev, I. L. Yakovleva, ... E. Yu. Priymak in Doklady Physics

    Article 01 July 2023
    

20. In Situ TEM Study of Phase Transformations in Nonstoichiometric Ni46Mn41In13 Heusler Alloy

    Abstract

    This paper presents a study of the metamagnetostructural transition of the martensitic type in the Ni46Mn41In13 alloy with magnetic shape...

    D. D. Kuznetsov, E. I. Kuznetsova, ... V. V. Koledov in Physics of the Solid State

    Article 01 January 2022