Search
Search Results
-
Plastic Flow Inhomogeneity of Bimetal Produced Via Laser Cladding
This work studies plastic flow inhomogeneity of bars upon uniaxial tensile testing. The high-nitrogen Cr–Mn–Ni austenitic stainless steel was chosen...
-
Highly sensitive hybrid structured based dodecagonal core with double layer hexagonal cladding photonic crystal fiber for food oil health sensing
The dodecagonal hollow core PCF-based edible oil sensor is put forward in this paper and quantitatively investigated over the terahertz regime. A...
-
Accident Tolerant Fuel with Chromium-Coated Fuel-Rod Cladding
The accident at the Fukushima NPP (Japan) showed the particular danger of a steam-zirconium reaction arising when the temperature of the fuel-rod...
-
Design and analysis of high performance phase shifters on polymeric slot waveguides within liquid crystal cladding
We present an on chip phase shifter based on a polymeric slot waveguide and a liquid–crystal cladding, which is capable of reaching high tuning...
-
Theoretical study of sub-wavelength gratings fabrication by TM0 mode interference in symmetric metal-cladding dielectric waveguide
This study proposes a method to fabricate sub-wavelength gratings based on the TM 0 mode in a symmetric metal-cladding dielectric waveguide. The TM 0 ...
-
Parametric study on the bimetallic cladding silica waveguide surface plasmon resonance sensor
Surface plasmon resonance (SPR) is available for measurement of liquid refractive index. Compared with near-infrared bands, the absorption...
-
Measuring Impurity Concentration in Near Wall Plasma During Tests of Prototypes of the First Wall of Fusion Reactor in PLM Facility
AbstractThis article describes the study of low pressure helium plasma with magnetic confinement at the experimental test setup at the Moscow Power...
-
A comparative study of interface characteristics and properties of bronze coatings on steel by plasma arc and cold metal transition deposition
A comparative study of bronze coatings on steel produced by plasma and cold metal transfer wire-arc depositing was carried out. The microstructure,...
-
The Comparative Analysis of the Fe–Cr–C–Ti–Al Coatings Synthesized by Laser, Arc and Hybrid Cladding Methods
AbstractThe Fe–Cr–C–Ti–Al cored wire layers were cladded by laser, arc and hybrid methods. Mechanical tests have shown that the cladded layers...
-
Damage of ITER Divertor Plates at Plasma Disruption
AbstractThe analysis of the effect of ELMs and plasma disruptions in ITER on the divertor plates is carried out. The divertor plates will not melt at...
-
Design of highly sensitive biosensors using hollow-core microstructured fibers for plasma sensing in aids with human metabolism
Detection of low index liquid analytes in real-time, in-situ, and with high accuracy is of great importance in various scientific fields,...
-
Influence of ball milling process on microstructure and properties of Ni-based coating by laser cladding
Ni50/(Ti, W)C composite coating was produced by laser cladding. The effect of ball milling process on the homogenization of coating microstructure...
-
Hexa-sectored square photonic crystal fiber for blood serum and plasma sensing with ultralow confinement loss
This study suggested a novel hexa-sectored square photonic crystal fiber (HS-SPCF) for blood serum and blood plasma sensing. The proposed HS-SPCF...
-
MAGNETIC FIELD GENERATION IN A CYLINDRICAL PLASMA USING THE DENSITY GRADIENT
AbstractIn this research, we use the fluid theory in an efficient way to perform a theoretical study on a divergent flux of fast electrons produced...
-
Structural-phase State of a High-hardness Heatresistant Alloy Formed by Plasma Cladding in a Nitrogen Atmosphere and High-Temperature Tempering
The structural-phase state of a 30KhGSA steel cladded with a high-hardness heat-resistant R18-type steel alloyed with aluminum and nitrogen is...
-
Control of the Structure and Wear Resistance of a Carbon-Nitrogen Austenitic Steel Coating Produced by Electron Beam Cladding
AbstractThe study investigates an electron beam cladded coating of nitrogen-alloyed austenitic steel (24.4Cr, 16.4Mn, 0.18Ni, 1.1Si,...
-
Preparation and Properties of Graphite Surface Vitrification Y2O3 Coating
The Mo-Y2O3 composite coating was prefabricated on the surface of the graphite crucible by plasma spraying, and then the coating surface was remelted... -
Wakes and Other Non-linear Effects Observed When Ultra-Short Ultra-High-Power Microwave Pulses Interact with Neutral Gas and Plasma
The non-linear interaction between powerful short laser pulse with plasma and neutral gas has stimulated enormous interest during the last few... -
Prospects of Quantum Cascade Lasers with GaInAs Waveguides
High-performance InP-based quantum cascade lasers for pulsed operation in the 5.5 µm wavelength range have been fabricated in the strain-compensated... -
Characteristics of Structure and Properties of Magnesium Alloys during Plasma Additive Deposition
AbstractThis paper deals with the additive manufacture of magnesium alloy products of the magnesium-aluminum-manganese-zinc system by plasma...