Search
Search Results
-
Effect of Copper-To-Aluminum Laser Welding Parameters on the Weld Formation and Microstructure Characteristics
The feasibility of joining of the 6061 aluminum alloy to double-layer oxygen-free copper (TU1) by laser welding technology is reported. The weld...
-
Simulation of the laser welding of porous and monolithic metallic plates
Numerical simulation of unsteady processes proceeding during the laser welding of plates made of porous and monolithic (non-porous) metals was...
-
Resistance Spot Welding and Laser Welding Effect on Nickel Tab for Electric Vehicle Battery Development
In this study, the joint ability of two different joining techniques, namely resistance spot welding and laser welding of nickel weld interfaces and... -
RECENT TRENDS IN LASER WELDING AND ADDITIVE TECHNOLOGIES (REVIEW)
AbstractAn overview of laser welding methods and additive manufacturing technologies used in modern mechanical engineering is given, and the main...
-
The effect of heat treatment on laser-welding performance of additive manufactured Ti6Al4V sheets
In this study, the laser weldability of Ti6Al4V materials produced by the selective laser melting (SLM) method, which is an additive manufacturing...
-
Enhancement of the electrical properties of Au/MgSe/Au microwave resonators via pulsed laser welding of MgSe and Au nanosheets
Herein, stacked nanosheets of Au (50 nm) and MgSe (100 nm) are fabricated by the thermal evaporation technique and welded by pulsed lasers of...
-
Low-cost irreversible blue diode laser transmission welding of poly(methyl methacrylate)-based microfluidics
Thermoplastics have been widely used as bulk material for microfluidic devices in biological and medical applications. One of the critical steps in...
-
Laser Welding Basics
This chapter introduces the basics of laser welding process. The principles of laser material interactions, the characteristics and theories of laser... -
Fiber laser spot welding of Mg–10Li–3Al–3Zn alloy in a hyperbaric environment
Due to a low melting point and boiling point, magnesium (Mg) alloy will be greatly evaporated during laser welding (LW); a hyperbaric environment is...
-
Induced crystallization and enhanced light absorption and optical conduction in WO3 films via pulsed laser welding technique
Herein amorphous WO 3 thin films prepared by the thermal evaporation technique under a vacuum pressure of 10 −5 mbar are treated via pulsed laser...
-
Laser Welding Spot Diagnostics by Laser-Induced Breakdown Spectrometry
AbstractIn situ diagnostics of laser welding has been carried out using laser-induced breakdown spectroscopy (LIBS). The influence of weld pool areas...
-
Growth and characterization of PbSe microcrystals via the pulsed laser welding technique
Herein lead selenide crystals are fabricated by the pulsed laser welding (PLW) technique within 2 min. The effect of the pulse width on the...
-
Fusion interface stress and its potential effect on microcrack in 10-kW level laser welding
Fusion interface stress is sharply produced by heating–cooling cycle in 10-kW level laser welding of stainless steel 316L with 10 mm thick, and it...
-
Numerical investigation on keyhole collapsing and rebuilding behavior during pulsed laser beam welding of Ti6Al4V titanium alloy under various pulse frequencies
A multi-phase and multi-physics coupling model was proposed and experimentally verified. The simulation of keyhole and weld pool dynamics was...
-
Micro-scale gas tungsten arc welding on invar sheet
Manipulation of metal microstructures via welding technique has attracted many interests due to its various applications for microscopic electronic...
-
LASER WELDING OF DISSIMILAR MATERIALS BASED ON THERMALLY HARDENED ALUMINUM ALLOYS
AbstractResults of an experimental study of the strength characteristics and structural-phase composition of a nondetachable connection of dissimilar...
-
Weld Pool Dynamics in Deep Penetration Laser Welding
This book systematically describes the weld pool behavior in laser welding and its influencing factors from the perspectives of testing technology,... -
Formation of a Martensite-Austenite Constituent in Х65 Low-Carbon Steel Under Thermomechanical Treatment and Welding
The features of formation of a martensite-austenite (M-A) constituent in the X65 steel after its helical rolling and laser welding are studied using...
-
Equivalent power densities model for multi-pulse ultrashort pulsed laser processing
Ultrashort pulsed laser, due to its extremely high peak power density, has been widely used for high precision, rapid and programmable manufacture....
-
A comparative study of laser wakefield produced by Ti: sapphire laser, Nd: YAG laser and CO2 laser under identical conditions
This paper presents a comparative analysis of laser wakefield acceleration (LWFA) generated by three different laser systems; Ti: Sapphire, Nd: YAG,...