Search
Search Results
-
Peak-Shaving of the Oxy-Fuel Power Plant Coupled with Liquid O2 Storage
Integrating a high proportion of intermittent renewable energy provides a solution for the higher peak-shaving capacity of coal-fired power plants....
-
Improvement of maximum power point tracking in photovoltaic arrays in different environments using hybrid algorithms
When the photovoltaic (PV) system is generating PV power, the partial shading (PS) condition will cause multiple peaks in the power-voltage curve,...
-
Broadband Supercontinuum Generation with Low Peak Power in a Circular Lattice Nitrobenzene-Core Photonic Crystal Fiber
AbstractWe highlight the advantage of varying the filling factor d 1 /Λ in the first cladding ring of a nitrobenzene-core (C 6 H 5 NO 2 -core) photonic...
-
Systematic study of peak power scaling for an Yb-doped Kerr-lens mode-locked bulk oscillator
We study systematically and experimentally the peak power scalability of a femtosecond Yb:YAG bulk oscillator with separate Kerr and gain medium. We...
-
Comparison of FWHM and peak power techniques for simultaneous measurement of strain and temperature in FBG sensors
Among the optical fiber sensors, fiber Bragg grating (FBG) has found remarkable attraction and many applications due to its ability to measure all...
-
Broadband supercontinuum generation in different lattices of As2Se3-photonic crystal fibers with all-normal dispersion and low peak power
This paper introduces a new design based on As 2 Se 3 photonic crystal fibers, with the first layer of air holes near the core being removed. Dispersion...
-
Broadband supercontinuum generation with low peak power in controllable C7H8-core photonic crystal fibers of characteristic quantities
In this paper, we propose a newly designed toluene-core (C 7 H 8 -core) photonic crystal fiber (PCF) with a hexagonal lattice. The difference in the...
-
Second and third harmonic generation from simultaneous high peak- and high average-power thin disk laser
We report Second Harmonic Generation (SHG) and Third Harmonic Generation (THG) energy conversion efficiencies up to 59% and 27%, respectively, for...
-
Predicting the Maximum of Solar Cycle 25: Total Power at the Cycle’s Beginning and in the Previous Cycle as Precursor
Abstract —Solar activity, the most famous manifestation of which is sunspots, varies with a period of approximately 11 years. Two 11-year cycles form...
-
A novel focal spot positioning method for high peak power lasers
The precise positioning of focal spots plays a crucial role in laser–matter interactions, especially for strong field physics requiring high laser...
-
As38 Se62 based segmented clad-graded index photonic crystal fiber for supercontinuum generation covering 3–9.5 μm with moderate peak power
A novel Segmented Clad-Graded Index (SC-GI) photonic crystal fiber with a circular core composed of As 38 Se 62 is proposed to realize the...
-
A Strategy to Reduce the Peak Temperature of the Chip Working under Dynamic Power Using the Transient Cooling Effect of the Thin-Film Thermoelectric Cooler
The thin-film thermoelectric cooler (TEC) is a promising solid-state heat pump that can remove the high local heat flux of chips utilizing the...
-
Effective Method for Increasing the Peak SXR Power in Experiments on Implosion of Nested Arrays of Mixed Composition
AbstractThe paper presents the results of experiments with the compression of the plasma of double multiwire arrays of mixed composition and the...
-
Self-Focusing and Self-Phase Modulation of a Focused Femtosecond Laser Beam in Fused Silica at Near-Critical Peak Power
Self-focusing and self-phase modulation of focused femtosecond laser pulse were studied in bulk fused silica. Depending on pulse energy magnitude,...
-
Power improvement of a Ho:YAG power amplifier and its application to a 150 W ZGP–OPO
We demonstrate a 2.09 μm Ho:YAG pulse power amplifier featuring high power, high efficiency, and low depolarization loss. By optimizing the gain...
-
Heat Recuperation for the Self-Condensing CO2 Transcritical Power Cycle
The supercritical CO 2 Brayton cycle has potential to be used in electricity generation occasions with its advantages of high efficiency and compact...
-
Photonic-crystal lasers with two-dimensionally arranged gain and loss sections for high-peak-power short-pulse operation
Realizing high-peak-power (tens to hundreds of watts or higher) short-pulse (tens of picoseconds or less) operation in semiconductor lasers is...
-
Estimation of inverse Compton peak frequency for 4FGL Blazars
This study uses a parabolic equation to fit the Inverse Compton (IC) spectral component of 3743 blazars (794 FSRQs, 1432 BL Lacs, and 1517 BCUs) from...
-
Superior peak-to-valley current ratio in Esaki diode by utilizing a quantum well
We propose a novel structure for the Esaki tunnel diode that utilizes a quantum well in order to increase the peak-to-valley current ratio. The...
-
108 fs high-power mode locked double-clad ytterbium-doped fiber laser using FePS3 saturable absorber
Femtosecond fiber lasers with a high peak power are of great interest due to their various real-world applications. This work uses a double-clad...