Search
Search Results
-
Flexible and transparent visible-infrared-compatible stealth film based on ITO/Ag/ITO configuration
The infrared (IR) stealth and visible stealth have different spectral response requirements, resulting in the difficulty in the coordination of the...
-
Spectroscopic analysis and thermoelectric properties of ITO/Cu/Ni/ITO multilayer by RF sputtering
In this paper, we present the effects of annealing in a vacuum on the structural, electrical, thermoelectric, optical and properties of a glass/ITO...
-
Synthesis, Investigation and Neural Network Modeling of the Properties of Sol-Gel ITO/ZnO and ITO/ZnO:Mg Structures
AbstractThe ITO/ZnO and ITO/ZnO:Mg bilayer structures were fabricated by the sol-gel method and their structural and photoelectric properties were...
-
Effect of ITO/SiO2 double-layer film thickness on the optoelectronic performance of metal-doped ITO near-UV LED
In order to optimize the optoelectronic performance based on metal-doped ITO LED, the effect of the thickness of the ITO/SiO 2 double-layer film in...
-
Electrically tunable vertically coupled ring resonator based on Si–ITO heterojunction
We numerically propose a vertically coupled ring resonator with a high extinction ratio and tunable group delay based on Silicon (Si)–Indium Tin...
-
Thickness-dependent nonlinear optical properties of ITO thin films
The nonlinear absorption (NLA) properties of ITO thin films were performed by utilizing femtosecond (100 fs), a high-repetition rate (80 MHz), and...
-
Superspace realizations of the Bannai–Ito algebra
A model of the Bannai–Ito algebra in a superspace is introduced. It is obtained from the threefold tensor product of the basic realization of the Lie...
-
Laser rear-side ablation mechanism for ITO removal on PET substrate
To establish the optimal processing parameters, it is imperative to gain an understanding of the interactions and ablation mechanisms between the...
-
Photonic crystal fiber-based plasmonic sensor with ITO for medical applications
In this paper, a photonic crystal fiber sensor is proposed for urine analysis of diabetic patients. Indium tin oxide (ITO) is adopted as plasmonic...
-
Studying the structure and optical properties of FeCl3: ITO prepared by sol–gel dip coating technique
This work used the sol–gel dip coating process to generate thin films of pure indium tin oxide and indium tin oxide film mixing with FeCl 3 at ratios...
-
Intensity and wavelength-dependent two-photon absorption and its saturation in ITO film
Third-order nonlinear optical (NLO) properties of indium tin oxide (ITO) thin film were studied using high repetition rate (80 MHz), femtosecond...
-
Studying the optical and nanostructural properties of CdS/NiO/ITO as a photodetector
In this paper, tri layer nanoheterostructure of CdS/NiO/ITO for photodetector device fabrication using co-precipitation method then spin coating for...
-
Study of Deposition of Al2O3 Nanolayers by Atomic Layer Deposition on the Structured ITO Films
In this work, the antireflective nanostractured ITO/Al 2 O 3 coatings that have a gradient of the effective refractive index in the direction...
-
Dynamic Tuning of ENZ Region of ITO and Sensing Using a Tapered Optical Fiber
The non-trivial optical properties of indium tin oxide (ITO) near its epsilon near zero (ENZ) regime, like field confinement and enhancement, and... -
Copper Grid/ITO Transparent Electrodes Prepared by Laser Induced Deposition for Multifunctional Optoelectronic Devices
AbstractFor large scale production on light emitting diodes and solar cells it is necessary to create semitransparent electrodes with large area and...
-
Characterization and applications of ITO/SeO2 interfaces
Herein, indium tin oxide (ITO) thin film substrates are employed to fabricate ITO/SeO 2 multifunctional interfaces. The effects of ITO substrates on...
-
Lossy-mode-resonance sensor based on ITO and LiF nanomaterial for the enhancement of quality factor and detection accuracy
A lossy mode resonance (LMR) prism refractive index (RI) sensor theoretical model based on the lithium fluoride (LiF)/ Indium tin oxide (ITO)/LiF...
-
Fabrication of ITO diffraction grating structure for infrared plasmonics by thermal nanoimprint lithography
Indium tin oxide (ITO) diffraction grating was fabricated on a polyimide (PI) film by using a combination of thermal nanoimprint lithography (NIL)...
-
Effect of annealing temperature in nitrogen atmosphere and under vacuum on structural, optical and electrical properties of sputtered ITO/Ni/ITO multilayer
ITO/Ni/ITO multilayers were deposited on glass substrates by RF sputtering. These multilayers were annealed at temperatures between 200 and 500 °C,...
-
Highly efficient ultraviolet photodetector based on molybdenum-doped nanostructured NiO/ITO thin film
Nanostructured pure and molybdenum (Mo)-doped nickel oxide (NiO) thin films with various concentrations of Mo dopants were successfully sputtered on...