Search

Search Results

1. Silicone rubber thermal aging performance for cables and accessories

   Polymer-based semiconductor materials are mainly used for cable body and cable accessories to ensure long-term stability of power cables. The...

   Dandan Su in Journal of Materials Science: Materials in Electronics

   Article Open access 14 February 2024
   

2. The Effect of Thermal Aging on the Failure Behavior of Adhesive- Bonded Single-Lap Joints

   The effects of thermal aging on the failure behavior of single-lap bonded joint composites were investigated experimentally. The single-lap bonded...

   N. Sati, K. Turan, G. Örçen in Mechanics of Composite Materials

   Article 03 May 2024
   

3. Antioxidative copper sinter bonding under thermal aging utilizing reduction of cuprous oxide nanoparticles by polyethylene glycol

   Durability of sintered Cu joints under thermal aging in the air was investigated for the reduction of Cu ₂ O using Cu ₂ O/polyethylene glycol (PEG)...

   Tomoki Matsuda, Seigo Yamada, ... Akio Hirose in Journal of Materials Science

   Article Open access 19 October 2023
   

4. Influence of Thermal Aging on Tensile-Plastic Flow Behavior of Indian Steel RAFM (F82H)

   Influence of thermal aging (873 K, 5000 h) on microstructure and tensile-plastic flow behavior of normalized and tempered (N&T) 1.4W – 0.06Ta IN-RAFM...

   K. C. Sahoo, K. Laha in Metal Science and Heat Treatment

   Article 01 January 2024
   

5. The Degradation Analysis of XLPE Materials Under Thermal Aging: A Comprehensive Study Through Partial Discharge Measurements and Structural Characterization Techniques

   This article focuses on the impact of thermal aging on the insulation material used in cross-linked polyethylene (XLPE) cables. During the...

   Mehti Camalov, Firat Akin, ... Musafir Guliyev in Transactions on Electrical and Electronic Materials

   Article 12 April 2024
   

6. Dielectric and thermal properties of composite radome material under accelerated aging: an experimental study

   This work aims at investigating the dielectric and thermal properties of silica fiber/epoxy(SiO ₂ /E) composite radome material subjected to 30 days of...

   Imran Haider, Iftikhar Hussain Gul, ... Malik Adeel Umer in Journal of Materials Science: Materials in Electronics

   Article 08 March 2024
   

7. Thermal Stability of GH4065A Superalloy Based on Microstructural and Performance Evolution Following Long-Term Aging

   This study investigates the thermal stability of a GH4065A superalloy at intermediate temperatures by conducting long-term aging treatments for...

   Yingbo Bai, Rui Zhang, ... **aofeng Sun in Metals and Materials International

   Article 27 August 2023
   

8. Constitutive behavior and failure prediction of crosslinked polymers exposed to concurrent fatigue and thermal aging: a reduced-order knowledge-driven machine-learned model

   To assess the combined effects of thermal aging and cyclic fatigue on the constitutive and failure behavior of crosslinked polymers, a novel...

   Aref Ghaderi, Georges Ayoub, Roozbeh Dargazany in Journal of Materials Science

   Article 22 December 2023
   

9. Impact of Co on Thermal Aging in Sn58Bi/Cu Solder Joints: IMC Growth and Transformation in Mechanical Properties

   The microstructure, evolution of intermetallic compound (IMC) layers, and mechanical property changes in Sn58Bi/Cu and Sn58Bi–0.3Co/Cu solder joints...

   ** Huang, Liang Zhang, ... Lei Sun in Metals and Materials International

   Article 18 May 2024
   

10. Understanding radiation-thermal aging of polydimethylsiloxane rubber through molecular dynamics simulation

    The effect of radiation-thermal aging on the structure and properties of polydimethylsiloxane (PDMS) rubber at the micro-scale was investigated...

    Weitao Lou, Chaoyang **e, Xuefei Guan in npj Materials Degradation

    Article Open access 29 October 2022
    

11. The Effect of Thermal Aging on the Mechanical Properties of Gold-Containing Solder Joints

    The reliability of SnPbAg solder joints containing gold (Au) under different aging conditions have been investigated. The solder joints were prepared...

    Yinghao Bi, Weiqi Guo, ... ** Wu in Journal of Electronic Materials

    Article 28 June 2024
    

12. The Thermal Conductivity, Thermal Diffusion, Thermal Expansion, and Mechanical Properties of Mg-2Nd-4Zn Alloys Subjected to Aging Treatment

    The effect of T4 and T6 treatment on the microstructures, precipitates, thermal expansion and thermal conductivity properties of Mg-2Nd-4Zn alloys...

    Ningning Dong, Hongbin Ma, ... Peipeng ** in Journal of Materials Engineering and Performance

    Article 23 May 2023
    

13. Thermal Aging Effect on the Compression Behavior of Thermoplastic Polymers—Proposed Phenomenological Model

    The performance of thermoplastic polymers will deteriorate due to various exposures. Predicting its service life before degradation is essential. The...

    Aghilas Hannou, Rabah Ferhoum, ... Raphaël Velasco in Journal of Failure Analysis and Prevention

    Article 07 February 2023
    

14. Study on thermal aging characteristics of micro nano BiFeO₃/LDPE composites under steady magnetic field

    In this paper, the anti-aging properties of composites doped with nano and micro BiFeO ₃ and treated with different magnetic fields were studied by...

    Y. Sun, W. Song, ... Q. Q. Lei in Journal of Materials Science

    Article 27 January 2023
    

15. Effect of Thermal Aging on the Microstructure and Mechanical Properties of Inconel 625 Superalloy Fabricated by High-Speed Laser Metal Deposition

    Compared to conventional laser metal deposition (LMD), high-speed laser metal deposition (HLMD) can significantly improve the efficiency with lower...

    Cheng Zhong, Xuechong Ren, ... Benli Luan in Metallurgical and Materials Transactions B

    Article 10 August 2023
    

16. Effect of thermal aging on the mechanical and dielectric properties of quartz fiber reinforced polyimide matrix composite

    Structural absorbing composite material is the key material for both stealth, load bearing and lightweight. In this experiment, a lightweight...

    Jie Dong, Wancheng Zhou, ... Runjun Sun in Journal of Materials Science: Materials in Electronics

    Article 17 June 2022
    

17. The Effect of Thermal Aging on the Wear Behavior of Glass Fiber-Epoxy Matrix Composite with SiC as Filler Material

    Adding fillers in glass fiber-epoxy matrix composite enhances the thermal, physical, and mechanical properties due to a strong bonding (interfacial)...

    S. S. Sahoo, D. K. Mishra, R. P. Dalai in Processing and Characterization of Materials

    Conference paper 2023
    

18. Evaluation of the Effect of Elevated Temperature and Preliminary Thermal Aging on the Residual Mechanical Properties of a Structural Fiberglass Using the Signals of Acoustic Emission

    The paper presents the results of mechanical tests on an aviation structural fiberglass based on a VPS-48 prepreg during quasi-static tests in the...

    D. S. Lobanov, E. M. Lunegova in Mechanics of Composite Materials

    Article 13 March 2023
    

19. Effect of Long-Term Thermal Aging at 680 °C on Microstructure and Mechanical Properties of P92 Steel

    The stability of microstructure and performance after long-term service are crucial for the engineering application of ASME SA335-P92 steel. In this...

    Peng Duan, Dong An, ... Song Wang in Journal of Materials Engineering and Performance

    Article 02 March 2023
    

20. Effect of Thermal Aging on Deformation and Fracture Properties of SS 304HCu

    Austenitic stainless steel 304HCu is one of the candidate materials for superheater and re-heater tubing of advanced ultra-supercritical power plant....

    G. Shanthi, M. Nanibabu, ... M. Vasudevan in Journal of Materials Engineering and Performance

    Article 12 October 2022