Search
Search Results
-
The Effect of Steel Grade Casting Sequence on the Length of Transition Bloom
During production, significant differences were observed between the center and surface composition of the transition bloom, posing challenges in...
-
Development of High Quality SWRH82A Grade Tyre Cord Steel Wire Rods
The demand for high-quality tyre cords has increased significantly with the expansion of the automotive industry. High carbon steel wire rods are... -
Corrosive-Wear Performance of Grade 316 Stainless Steel Sliding Against Grade 316 Stainless Steel in NaCl Solution
Most of the reported corrosive-wear or tribocorrosion tests have been carried out using an inert and insulating counter-body in the experimental set...
-
Effects of Temperature and Density on Transition Slab Length During Steel Grade Transition
The length of the transition slabTransition slab may be decreased by manipulating differences in temperatures or densities of new and old grade... -
Testing Variants of Plasma Hardfacing of Bronze on Grade 38H2N2MA Steel
AbstractThis work presents the results of testing the plasma hardfacing of bronze on steel with the help of a plasmatron used at positive and reverse...
-
Sliding Friction of R6M5 Steel on Grade 45 Steel in Litol-24 Grease with Zinc and Cadmium Powder Additives
AbstractThe sliding friction of R6M5 steel on grade 45 steel at a load of up to 1400 N under the lubrication conditions of Litol-24 grease modified...
-
Effect of RE Content on TiN Inclusions Formation in P110-Grade Casing Steel
Hydrogen resistance and sulfide stress corrosionCorrosion resistance of casing steelsCasing steel are severely impaired by large TiNTiN... -
Optimization of Coiling Temperature of Nb-Ti Containing High-Strength S700MC Grade Steel
A Nb-Ti containing high-strength low alloy (HSLA) steel (S700MC grade, YS = 700 MPa) was subjected to hot rolling and coiling simulation experiments...
-
Impact of Laser Shock Peening on Mechanical Properties of Wire Arc Additive Manufactured Grade 91 Steel and Monel-400 Bimetallic Components
This study investigates the effects of Laser Shock Peening (LSP) on the mechanical properties and microstructure of Wire Arc Additive Manufactured...
-
Effect of Niobium Microalloying on the Mechanical Properties in Grade R4 Mooring Chain Steel
The mooring chain is an important equipment to maintain the safety of marine facilities. In this study, the effect of niobium microalloying on the...
-
Study of the Influence of Surface Treatment with a Flexible Tool on the Cyclic Durability Resistance of Steel Grade 25
AbstractThe influence of surface treatment with a flexible tool with the simultaneous application of a brass coating on grade 25 steel on resistance...
-
Influence of Laser Radiation on Surface Roughness of Grade U8 Steel Blanking Dies
AbstractThis work presents the results of experimental investigations of the influence of laser radiation on surface roughness of grade U8 carbon...
-
Testing Structure and Properties of Grade 25Cr Super Duplex Steel with Various Nickel Concentrations
AbstractThis article is a study of the structure and properties of high-strength steel with a nickel content from 5.5 to 9% in its specimens. The...
-
Formation Mechanism and Evolution Behavior of the Soft Zone in Grade 91 Steel Weldment During Postweld Heat Treatment
The soft zone of Grade 91 steel has been precisely identified and systematically characterized subjected to designed postweld heat treatment. It has...
-
Effect of Electrolytic-Plasma Surface Treatment on Structure, Mechanical, and Tribological Properties of Grade 1 Wheel Steel
Results are given for electrolytic-plasma treatment of grade 1 wheel steel. Regime, input, and output parameters of the plasma treatment production...
-
Creep Performance and Microstructural Characterization of Electron-Beam Welded 316LN SS-Grade 91 Steel Dissimilar Joint
Microstructural features and creep-rupture behaviour of a dissimilar weld joint (DWJ) between Grade 91 (G91) steel and 316LN stainless steel prepared...
-
Study of Brown Patch Defect in Automotive Grade Interstitial Free Steel
Over the years, cold rolled steel surface quality acceptance norms are becoming stringent and accordingly steel suppliers had to improve product...
-
Investigation of the Two-Step Hot Rolling Process of High-Grade Non-oriented Electrical Steel
The 0.35 mm-thick high-grade non-oriented electrical steel sheets were produced by different two-step hot and cold rolling processes. The...
-
Effect of Cross Section on the Microstructure and Mechanical Properties of 950 MPa Grade Heavy Steel Plate for Hydropower
The microstructure and fracture mechanism of a 950 MPa grade heavy steel plate for hydro-power were studied using various microscopy techniques such...
-
Preparation of high-performance SA508 Grade 3 steel by laser powder bed fusion: role of high cooling rate on microstructure and mechanical properties
The preparation of SA508 Grade 3 steel was innovatively realized based on laser powder bed fusion (LPBF). On this basis, the influence of processing...