Search
Search Results
-
Simultaneously enhanced interfacial shear strength and tensile strength of heterocyclic aramid fiber by graphene oxide
Heterocyclic aramid fibers, a typical kind of high-performance fibers, have been widely used in aerospace and protection fields because of their...
-
Effect of Heat Treatment on the Shear Strength of SiC/PyC/SiC Composites
In this study, the influence of heat treatment on the shear strength of SiC/SiC composites at room temperature and its causes were investigated....
-
Influence of Microstructure Randomness on the Shear Behaviour and Compressive Strength of Continuous Carbon Fibre Composites
Axial compressive strength is a key design parameter for CFRP structures. One of its limiting factors is the non-linear shear behaviour of the...
-
Interfacial microstructure, shear strength and wettability of Ni-added Sn-0.3Ag-0.7Cu/Cu solder joint
This study investigates the effect of Ni additions of 0.05 and 0.1 wt% on the properties of SAC0307/Cu solder joints. The interfacial microstructure,...
-
Flow Strength Measurements of Wrought and AM SS304L via Pressure Shear Plate Impact Experiments
Pressure-shear plate impact experiments were performed to quantify flow strength of wrought, as-built additively manufactured (AM), and heat-treated...
-
Effect of Mg Content on the Shear Strength of Al-Si-Mg and Al-Si-Cu Alloys at Elevated Temperatures
Die soldering in the die casting process is observed as aluminum bonded to the die surface and has historically been associated with Al–Fe...
-
Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints
The reliable use of ultrasonic metal welding requires a thorough understanding of the relevant bonding mechanisms. This article presents an approach...
-
Investigating the influence of fabrication parameters, flax fibre reinforcement, and ageing on interlaminar shear strength in thermoplastic-bonded wood veneers
This study investigates the suitability of two thermoplastic polymers that are non-toxic and environmentally friendly, namely polylactic acid (PLA)...
-
Enhanced shear strength and microstructure of Cu–Cu interconnection by low-temperature sintering of Cu nanoparticles
Sintering of Cu nanoparticles at low temperature is a promising material for advanced power electronic packaging; while its sintering quality is...
-
Review on Shear Strength and Reliability of Nanoparticle Sintered Joints for Power Electronics Packaging
The rapid development of the third-generation semiconductors has posed new requirements and challenges for power electronic packaging. In recent...
-
Enhanced Shear Strength of Sn-Bi/(111)Cu Joints by Refined Distribution of Bi in the Composite Solder
In recent years, Sn-Bi solder has been widely used in the electronic packaging industry due to its low melting point. However, the segregation and...
-
Modeling and Optimization of Shear Strength of the Welded Joint Produced by Ultrasonic Welding of Copper Wire to Aluminum Sheet
Ultrasonic welding is a subset of frictional solid-state joining processes. This process, with its ability to join thin and dissimilar metallic...
-
Interlaminar Shear Strength Behavior of Carbon Fiber Reinforced Aluminum Alloy Laminate
The interlayer bonding ability is a crucial indicator of thermoplastic fiber metal laminates (FMLs). Using different preparation strategies and...
-
Size Effect on Shear Strength of Slender Reinforced Concrete Beams
In this paper, a comparative analysis is performed on the efficiency of size effect of shear strength models of reinforced concrete (RC) beams made...
-
Effects of different surface treatment methods on the micro-shear bond strength of calcium silicate–based materials
The present in vitro study aimed to evaluate the influence of various surface treatments on the micro-shear bond strength (μSBS) of calcium...
-
Study on prediction of tensile-shear strength of weld spot based on an improved neural network algorithm
Spot welding is one of the main connection methods of automobile parts. The tensile-shear strength of spot welding joint is the most important...
-
Impact of Different Parameters on Adhesively Bonded Composite Joint on Shear Strength—A Review
Composite materials, the new revolution in the aviation, automotive, and marine industries, are taking over from conventional materials because of...
-
Effect of Shear Angle on Microstructure and Mechanical Properties of AZ61 Mg Alloy During Extrusion-Shear Process
To enhance the strength and plasticity of the AZ61 Mg alloy, a process called extrusion-shear (ES) was proposed. The process is based on conventional...
-
Investigating the Effect of Electrode Pressure on Nugget Size, Microstructure and Tensile Shear Strength of Resistance Spot Welded Advanced High Strength Dual Phase Steel Joints
The main objective of this investigation is to study the effect of electrode pressure on nugget formation, microstructural features and tensile shear...
-
Microstructure Evolution and Shear Strength Study of Sn–9Zn and Sn–8Zn–3Bi on Cu Substrate
In electronics assembly, solder joints not only serve as mechanical supporters-, but also as heat removers. Therefore, solder joint reliability is a...
