Search
Search Results
-
Reversion of Natural Aging Clusters in 6063 Al-Mg-Si Alloy
Natural aging for 11 days at room temperature was applied to 6063 industrial aluminium alloy after being solutionized and quenched in order to form...
-
Effect of Low Aging Temperature and Reversion of α′-martensite on the Fracture Behavior of a 2304 Lean Duplex Stainless Steel
The effects of cold rolling, leading to strain-induced α’-martensite transformation and its subsequent reversion during annealing treatment, were...
-
Effect of low aging temperature and the reversion of martensite on the mechanical behavior of a 2304 lean duplex stainless steel
The effect of aging temperature on martensite reversion and mechanical behavior of a 2304-lean duplex stainless steel (LDSS) was analyzed after cold...
-
High-Speed Erichsen Testing of Grain-Refined 301LN Austenitic Stainless Steel Processed by Double-Reversion Annealing
Austenitic Cr–Ni stainless-type 301LN steel was subjected to a double-reversion annealing (DRA) treatment to develop bulk grain-refined...
-
Multiphase-field simulation of austenite reversion in medium-Mn steels
Medium-Mn steels have attracted immense attention for automotive applications owing to their outstanding combination of high strength and superior...
-
Direct Observation of Austenite Reversion During Aging of 18Ni (350 Grade) Maraging Steel Through In-Situ Synchrotron X-Ray Diffraction
Austenite reversion in Fe–Ni alloys plays a significant role in determining their mechanical properties. Increasing the austenite content in these...
-
Thermodynamics and kinetics of precipitation and austenite reversion during aging of Ti-free grade 300 maraging steel manufactured by laser powder bed fusion (LPBF)
Austenite reversion and intermetallic precipitation are two key phase transformations in maraging steels which determine the strength and ductility....
-
Lamellar Pearlite as an Initial Microstructure for Austenite Reversion Treatment
Through carbon and manganese partitioning to austenite from polygonal ferrite, bainite and martensite, retained austenite (RA) could be stabilized at...
-
Effect of Combined Tempering and Aging in the Austenite Reversion, Precipitation, and Tensile Properties of an Additively Manufactured Maraging 300 Steel
Maraging 300 is an ultrahigh strength steel with significant alloy addition, resulting in a martensitic matrix hardened by precipitation through...
-
Effects of Defect Development During Displacive Austenite Reversion on Strain Hardening and Formability
Martensite that is mechanically induced from metastable austenite can be reversed to austenite upon annealing. The reversion transformation can be...
-
Achievement of polarity reversion from Al(Ga)-polar to N-polar for AlGaN film on AlN seeding layer grown by a novel flow‐modulation technology
N-polar AlGaN epi-layer was realized on AlN seeding layer grown with a novel flow-modulation method. The polarity reversion from Al(Ga)-polar to...
-
Annealing of an Austenitic Stainless Steel Deformed Under Shear Loading
Microstructural evolution during reversion annealing of an AISI 304L stainless steel, plastically deformed under shear mode, was investigated for the...
-
Texture Preference and Variant Analysis of Martensite Formation in Laser Powder Bed Fusion
In laser powder bed fusionLaser powder bed fusion (L-PBF) (L-PBF) of maraging steelMaraging steel, oscillating thermal cycles inherent to additive...
-
Phase transformations in cold-rolled 304L stainless steel by dilatometry
Phase transformations in cold-rolled (CR) 304L austenitic stainless steel were studied using different techniques, including dilatometry, X-ray...
-
Effect of Composition, Mechanical Alloying Temperature and Cooling Rate on Martensitic Transformation and Its Reversion in Mechanically Alloyed Stainless Steels
AbstractStainless steels with Fe/Cr/Ni ratios of 74/18/8, 71/17/12, and 55/20/25 were produced from elemental powders by high energy mechanical...
-
Electrochemical and Exfoliation Corrosion Behavior of Reversion-Treated High-Strength Aluminum Alloy
The present study aims to understand the microstructural modification affecting the electrochemical and exfoliation corrosion (EXCO) characteristics...
-
Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels
The phenomena occurring during continuous heating of cold-rolled AISI 304L and AISI 316L stainless steels from room temperature up to 1150 °C were...
-
Martensite Reversion Duality Behavior in a Cold-Rolled High Mn Transformation-Induced Plasticity Steel
The martensite reversion behavior of a cold-rolled high Mn transformation-induced plasticity (TRIP) steel was investigated through an elaborate...
-
Microstructural Evolution in Additively Manufactured Fe-Cr-Ni Maraging Stainless Steel
In this work, the effect of heating rate on the phase transformation temperatures was investigated using dilatometry analysis. Continuous heating and...
-
Digitally-defined ultrathin transparent wireless sensor network for room-scale imperceptible ambient intelligence
Wireless and battery-free radio-frequency (RF) sensors can be used to create physical spaces that ambiently sense and respond to human activities....
