Search
Search Results
-
Effect of vacancy defects on tensile properties of CNTs
Carbon nanotubes (CNTs), as one-dimensional nanomaterials, exhibit extraordinary mechanical, electrical, and chemical properties. In this research...
-
Structural and optical properties of PVP/PEO blends doped with CNTs
Carbon nanotubes (CNTs) have garnered substantial interest as nanofillers for improving the properties of polymer composites due to their exceptional...
-
Wear Resistance and Mechanical Properties of 7085 Alloy via Adding CNTs Based on Ultrasonic Casting
High-energy ultrasound has been proposed to ameliorate the uniform dispersion the reinforcement and used widely fabricating in high strength metal...
-
Influence of purity and level of disorder on the spinnability of CNTs yarn derived from the CNTs forest grown by a parametrically tuned CVD
The chemical vapour deposition (CVD) grown carbon nanotubes (CNTs) forest can be transformed into its yarn and sheet thus provides a novel way to...
-
Effect of ECAP on Mechanical Properties and Corrosion Resistance of 2024-CNTs@Ni Composite
AbstractThe 2024-1.5 wt%CNTs@Ni (Nickel-coated carbon nanotubes) composite were subjected to equal channel angle pressing (ECAP) deformation...
-
Tribological and Corrosion Properties of the CoCrAlYTaSiC-xCNTs Coatings Deposited by Laser Cladding
The M CrAlY coating has been potential candidate for the parts applied in friction and corrosion conditions, and CNTs (carbon nanotubes) are expected...
-
Preparation and mechanical properties of CNTs/phenolic resin microcapsules
In order to keep the microcapsules intact during transportation and storage, the mechanical properties of the microcapsules need to be enhanced, and...
-
Antimicrobial (Antibacterial) Properties and Other Miscellaneous Applications of Carbon Nanotubes (CNTs)
The advent of biomaterials in medical technology has far-reaching benefits in medical interventions but is currently plagued by the successful...
-
Fabrication and characterization of nano-ZnO/CNTs/PDMS flexible pressure sensor
Polydimethylsiloxane (PDMS) is widely used as an elastic substrate for flexible pressure sensors. Functional materials integrated into the network of...
-
Effect of CNTs on Activation Volume and Mobile Dislocation Exhaustion Rate of CNTs/Al under Compression Loading
In this study, stress relaxation compression tests were performed to investigate the strain rate sensitivity, activation volume and mobile...
-
Coupling effect of electrophoretic deposition and solid-phase joining on CNTs/Mg multi-material joint
The carbon nanotubes (CNTs) mixing inside a joint between two fastened parts of the material is the key to realize balance of strength and...
-
Impact of CNTs Reinforcement on Microstructural Characteristics and Tribological Behavior of Plasma-Sprayed Conventional Ceramic Coatings
The reinforcement of carbon nanotubes (CNTs) in Al 2 O 3 –3wt%TiO 2 and WC-20wt%Co thermally sprayed ceramic coatings is expected to enhance their...
-
Effect of aging treatment on the microstructure and mechanical properties of TiO2@CNTs/2024 composite
Novel TiO 2 nanoparticles-coated CNTs (TiO 2 @CNTs) fabricated by the alcohol-thermal method were used as the reinforcement to prepare aluminum matrix...
-
The synergistic effect of GNPs + CNTs on properties of polyester: comparison with polyester–CNTs nanocomposite
Numerous studies have revealed the properties of composites obtained by adding carbon nanotubes (CNTs) into different polymer matrices. Although CNTs...
-
The Effect of Electroplasticity on CNTs/Al Under Different Heat Treatment Tempers
The CNTs/Al is a promising lightweight high-strength composite in the aerospace industry. However, poor plasticity under room temperature limits its...
-
Influence of catalysts in the growth of CNTs for utilization in electronic devices application
In this study, silicon (Si) substrates were coated with nickel (Ni) and nickel–titanium (NiTi) using advanced RF sputtering, and carbon nanotubes...
-
Heat Treatment Behavior, Microstructure and Mechanical Properties of TiO2@CNTs/7075 Al Composites Fabricated by Ultrasonic-Assisted Casting
The carbon nanotubes coated with TiO 2 reinforced 7075 Al composites were fabricated by ultrasonic-assisted casting in this study. The heat treatment...
-
An Effective PtNi/CNTs Catalyst for the Hydrogen Oxidation Reaction in an Alkaline Electrolyte
AbstractPtNi catalysts on carbon nanotubes (CNTs) subjected to preliminary treatment are synthesized and studied in the hydrogen oxidation reaction...
-
Study of SiO2 aerogel/CNTs photothermal de-icing coating for wind turbine blades
Ice on the surface of wind turbine blades may result in power production losses and unsafe operations. An effective technological solution to the ice...
-
Novel improvements of CNTs/porous Si hybrid sensor by incorporating AuNPs
The present work can be considered as a novel approach to develop the performance of CNTs/porous Si structure gas sensor, through incorporating AuNps...
