Search
Search Results
-
Experimental Study on LaFeO3/Nb2O5 Oxygen Carrier in Chemical-Loo** Partial Oxidation of Methane
Chemical-loo** partial oxidation of methaneChemical-loo** partial oxidation of methane is a green technologyTechnology. The ironIron-based... -
High Temperature Oxidation of T91 Alloy
Ferritic-martensitic steels are extensively used in thermal and nuclear power plants due to their higher thermal conductivity and lesser thermal... -
ReaxFF molecular dynamics study of early oxidation of nickel nanoparticles
Nickel nanoparticles (NPs) are widely used in many fields, but contact with oxygen leads to structural damage and degradation of their properties, so...
-
Oxidation Study of Ni-W Alloy Matrix Coating Reinforced with Multiple Dissimilar Nanoparticles
A pulsed electrodeposition was performed on mild steel surfaces to prepare Ni-W-based composite coatings consisting of TiO 2 and ZrO 2 oxide...
-
The Oxidation Behaviors of NiCoCrAlY Coatings After Pre-Oxidation Treatment During High-Temperature Oxidation at 800 ℃ and 900 ℃
Thermal barrier coatings (TBCs) are essential for protecting the high-temperature components in gas turbines. However, the durability of TBCs is...
-
Role of Cerium on High-Temperature Oxidation Behaviour of Low-Carbon Steel
This study investigates the effect of Cerium (Ce) on the oxidation behaviour of low-carbon steels. Different compositions of the Ce-containing steels... -
Nano-indentation, Residual Stress, and Oxidation Study of Spark Plasma-Sintered Tungsten Alloys
The present study deals with, nano-indentation, residual stress and oxidation study of mechanically alloyed powders sintered at 1100 °C and 1150 °C....
-
Study on Machinability of SiCp/Al Composites by Laser-Induced Oxidation-Assisted Turning
The SiCp/Al composite exhibits severe tool wear and poor machined surface quality in daily machining. Therefore, this study proposes a laser-induced...
-
Oxidation Behavior of Spent NdFeB Magnet Under Selective Oxidation Conditions
The oxidation behavior of spent NdFeB magnets was investigated when exposed to the selective oxidation conditions as a prerequisite method to achieve...
-
Operando X-ray Diffraction Study of Mn–Ce Catalysts for CO Oxidation
AbstractWe prepare a series of MnO x –CeO 2 catalysts with a molar ratio of Mn : Ce = 3 : 7 by coprecipitation and varying the calcination temperature...
-
Study on the oxidation resistance mechanism of self-healable NiAl coating deposited by atmospheric plasma spraying
A dense NiAl coating with low oxide content was deposited on the GH4202 superalloy substrate by atmospheric plasma spraying (APS) using...
-
A Study of Gas-Saturated Layer After Oxidation of Alloy Ti6242S at 500 – 800°C
Oxidation of alloy Ti6242S in the temperature range of 500 – 800°C in an air atmosphere is investigated by x-ray diffraction analysis, nuclear...
-
Study on the process of oxidation resistance composite coating on graphite electrode by dip** method
Graphite material is a kind of conductive material with excellent thermal shock resistance, is an important strategic mineral resources, widely used...
-
Study of the Elemental Composition and Wear Resistance of Coatings Obtained by Plasma Electrolytic Oxidation
AbstractThe results of studies of the elemental composition and wear resistance of coatings formed by plasma-electrolytic oxidation on aluminum...
-
Study of Isothermal Oxidation of Aluminizing and Chromizing Coating on Tungsten Electrical Contacts used in Automotive Disk Type Electromechanical Horns
Electrical contacts are used in electromechanical horns to make and break the circuit. Electrical contacts are generally made of tungsten refractory...
-
Long-Term Thermal Stability and Oxidation Resistance of HAYNES 233 Alloy
HAYNES 233 alloyHAYNES 233 alloy is an alumina-formingAlumina-former alloy developed for use in a variety of high temperature applications. It is... -
Pressure Oxidation Modelling for Design and Optimisation
Process modelling is used as a simulation tool for the purposes of design and optimisation. This paper discusses the application of modelling in... -
A Study of the Oxidation of Gd-Doped FeCrAl in 1000 °C Steam Environments
This study investigated the isothermal oxidation behavior of FeCrAl-(0, 1, 2, 4) wt.% Gd alloys when prepared by spark plasma sintering at 1000 °C in...
-
Effect of Cr Do** on Oxidation Resistance and Oxidation Mechanism of TiC Reinforced Steel Matrix Composites: Experiments and First-Principles Calculations
Oxidation is an inevitable problem and accelerates the wear of materials under high temperature wear conditions. To enhance the oxidation resistance...
-
Study on Galvanic Corrosion Behavior of AH36 Steel and TC4 Alloy Processed by Plasma Electrolytic Oxidation
The plasma electrolytic oxidation (PEO) technology was used to prepare ceramic coating on the surface of titanium alloy to prevent the galvanic...