Search
Search Results
-
Loading Conditions Effects on Fatigue Life of Notched Rods Using Four-Point Bending Test
Shaft design assumes that the end supports of the shaft are simply supported that is not entirely correct. This article investigates the effects of...
-
Modeling the Ligament Breakage Mechanism in Concrete Specimens Using a Four-Point Bending Test
In this paper, the capability of a four-point bending test to determine the failure mechanism of ligaments was investigated using PFC2D. For this...
-
Fatigue Damage Simulation of a Metal Sandwich Panel Under Four-Point Bending Conditions
This paper presents the effect of a variety of dimple core designs of a metal sandwich panel simulated using four-point bending under different... -
Analysis of Tooth Root Crack Initiation, Propagation and Fracture Surface Based on Gear Bending Fatigue Test
Cracking from tooth root bending fatigue is the main form of tooth failure. The current research on root crack and fracture is based on analytical...
-
Influence of Bending Radius and Heat-Affected Zones on the Bending Performance of High-Strength Thin-Walled Structures Formed by Laser-Assisted Robotic Roller Forming
Laser-assisted robotic roller forming (LRRF) is a robot-based forming process that bends metal sheets by a universal forming roller with the... -
The study on in situ asymmetric bending behavior of structural bamboo materials under combined tension-bending loads
As a growing structural material in the engineering field, bamboo materials are mainly subjected to tension, bending, and a combination of the two...
-
Experimental and Numerical Analysis of the Three-Point Bending Behavior of Hybrid Adhesive-Bonded Aluminum–Wood Plates
Hybrid components of wood-based materials offer a high potential for automotive lightweight applications. To investigate the bending behavior of...
-
Investigation of the Damage Behavior of Steel/CF Hybrid by Pure Bending Test
To address the increasing demand for lightweight and high-performance materials, metal/carbon fiber hybrid laminates that contain a metal sheet... -
Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites
The primary objective of this study is to conduct a comprehensive experimental investigation into the impact of yarn reduction on the damage...
-
Effect of Diameter of Fulcrum Roller on Shape of Rebar in Bending
The strength of building is increased by using rebars. The bent rebar is obtained with a bending machine. In the bending machine, there are the... -
Data-Based Global Control of the Part’s Geometry During Free-Form Bending
Freeform bending is a kinematically-controlled bending process that can be used to achieve complex 3D geometries. Geometry control of the bent part... -
Analysis of nonlinear bending behavior of nano-switches considering surface effects
Nano-switch structures are important control elements in nanoelectromechanical systems and have potential applications in future nanodevices. This...
-
Prediction of GFRP Self-Heating Kinetics Under Cyclic Bending
Self-heating effect caused by internal friction is a meaningful problem in design and operation of cyclically loaded structural elements made of...
-
Load-bearing behaviors of sandwich plates with non-uniformly distributed grid cores: static compression and bending
Grid-core sandwich plates have wide applications, and non-uniform grid plates (NUGPs) demonstrate greater potential under various loading conditions....
-
Numerical Prediction of Three-Point Bending of Braided Composite Tubes With Axial Yarns
In this paper, the effect of axial yarns on progressive bending damage of braided composite tubes is predicted by simulation. In this paper, Abaqus...
-
The Prediction and Experimental Study of Bending Fatigue Life of Carburized Gears
Tooth bending failure, one of the gear’s most dangerous failure modes, is caused by alternating bending stress at the tooth root. The fatigue process...
-
Stress Relief for Crack Prevention by Adding Holes to V-Bending Die
Press forming of metal sheets has been widely used in industry. Press forming processes clamp sheet-metal between upper and lower dies, and deform... -
Friction Behavior in Tension-Bending
In the deep drawing process, which is a typical method in sheet metal forming, there are two contact conditions between die and workpiece, one is the... -
Nonlinear Bending Study of Composite Singly Curved Stiffened Shells with Complicated Boundary Conditions
The nonlinear bending of transversely loaded thin cylindrical stiffened shell from laminated composite was not investigated in the literature for...
-
Theoretical Consideration and Experimental Studies of Bending Deformations of Inhomogeneous Ferroceramic Plates
A theoretical analysis of the models of inhomogeneous piezotexture, describing bending deformationsBending deformations in an external electric field...