Search
Search Results
-
Micromechanics of Ceramic-Matrix Composites at Elevated Temperatures
Ceramic-matrix composites (CMCs) possess high specific strength and modulus at elevated temperature, and have already been applied in hot-section...
-
Micromechanics Proportional Limit Stress of Ceramic-Matrix Composites Under Monotonic Tensile Loading at Elevated Temperatures
Under tensile loading at elevated temperature, the proportional limit stress (PLS) of SiC/SiC ceramic-matrix composites (CMCs) was investigated using...
-
Optimization of the Performance of Earth Mortars at Elevated Temperatures
This study investigates the behavior of three earth mortars exposed to elevated temperatures, considering the nature of the aggregates used. Earth...
-
Micromechanics Residual Strength of Ceramic-Matrix Composites Under Cyclic Fatigue Loading at Elevated Temperatures
In this chapter, the strength degradation of CMCs subjected to cyclic loading at elevated temperatures in oxidative environments was investigated....
-
Methodologies for Evaluating FRP-Concrete Interfacial Bond Strength at Elevated Temperatures
The strength of interfacial bond between fiber reinforced polymer (FRP) and concrete substrata influences the capacity of FRP-strengthened concrete...
-
Behaviour of Cellular Steel Beams Under Uniform Moment at Elevated Temperatures
Cellular steel beams have proved to be one of the most significant developments in steel construction. The introduction of an opening in the web of a...
-
Micromechanics Stress–Strain Behavior of Ceramic-Matrix Composites Under Monotonic Tensile Loading at Room and Elevated Temperatures
Under tensile loading, the stress–strain curves of ceramic-matrix composites (CMCs) exhibit nonlinear behavior at room and elevated temperatures, due...
-
Strength and Relaxation and Corrosion Resistance of Ultrafine-Grained Austenitic 08Kh18N10T Steel Produced by ECAP: III. Deformation Behavior at Elevated Temperatures
Abstract —The deformation behavior of an ultrafine-grained (UFG) 08Kh18N10T steel at elevated temperatures (450–900°C) has been studied. The maximum...
-
Characterization of Microstructure and Mechanical Property Evolutions of 42CrMo Steel Served at Elevated Temperatures
42CrMo steels are widely used for many general-purpose components served under thermal environment, owing to their relatively high strengths and low...
-
Effect of Mg Content on the Shear Strength of Al-Si-Mg and Al-Si-Cu Alloys at Elevated Temperatures
Die soldering in the die casting process is observed as aluminum bonded to the die surface and has historically been associated with Al–Fe...
-
Mechanistic Modeling of Cyclic Softening in Ni-Based Superalloys at Elevated Temperatures
The cyclic stress–strain response of Ni-based superalloys at elevated temperatures in the literature has been analyzed and modeled mechanistically to...
-
Flow Stress Behavior and Governing Equation of Plastic Flow of Low-Carbon Steel at Elevated Temperatures
The effect of hot isothermal compression on the flow stress of low-carbon steel was studied using a Gleeble 3500 stimulator at temperatures from 900...
-
Softening Mechanisms in Additively Manufactured 420 Stainless Steel at Elevated Temperatures
The high-temperatureHigh temperature behavior of additively manufactured 420 stainless steel420 stainless steel fabricated via the laser powder bed...
-
Corrosion Behaviour of Ni–Al Coated T23 Weldments at Elevated Temperatures
The study investigates the high-temperature corrosion behaviour of Ni–Al coatings produced by the wire arc spraying technique on ASME SA T23 low...
-
Modeling the Effect of Hydrogen Charging at Elevated Temperatures on the Strength of NPP Steam Generator Pipes Steel
The operating conditions for modeling and evaluating the invariant strength characteristics of steam generator 22K steel at elevated temperature and...
-
Ratcheting Assessment of Rail Steel at Elevated Temperatures in the Presence of Dynamic Strain Aging
The present study intends to evaluate the ratcheting of U75VG rail steel samples tested at different stress levels and various temperatures through a...
-
Localized corrosion in selective laser melted SS316L in CO2 and H2S brines at elevated temperatures
In this work, the passivation and localized corrosion of selective laser melted (SLM) stainless steel 316 L when exposed to high pressures of CO 2 ...
-
Effect of Low and Elevated Temperatures on the Dissipative Properties of Woven Carbon Fiber Plastics
The paper presents and analyzes the results of experimental studies to determine the dissipative properties of a multilayer polymeric composite...
-
Modeling and Evaluation of the Strength of Steel of Turbogenerators under Complex Loading at Elevated Temperatures
We analyze some aspects of the refined modeling and determination of the strength characteristics of 26Kh2MF steel used in turbogenerators under the...
-
Thermal stability of Te nanowires and their crystallography-determined surface evolution at elevated temperatures
Nanowires are fantastic nanostructures for designing new functional devices because of their extraordinary properties. However, nanowires usually...
