Search

Search Results

1. Structural Transformations and Formation of Microstructures and Nanostructures in Thin Films of Chalcogenide Vitreous Semiconductors

   Abstract

   Chalcogenide vitreous semiconductors (ChVSs) are of both fundamental and applied interest as materials in which reversible structural...

   S. V. Zabotnov, P. K. Kashkarov, ... S. A. Kozyukhin in Nanobiotechnology Reports

   Article Open access 01 December 2023
   

2. Laser-induced nanobubbles safely ablate vitreous opacities in vivo

   In myopia, diabetes and ageing, fibrous vitreous liquefaction and degeneration is associated with the formation of opacities inside the vitreous body...

   Félix Sauvage, Van Phuc Nguyen, ... Stefaan C. De Smedt in Nature Nanotechnology

   Article 17 March 2022
   

3. Quantitative analysis of methanol in blood, urine, vitreous humor, and cerebrospinal fluid by using gas chromatography-head space in two suspected cases of methanol poisoning

   Methanol is a toxic alcohol and can be encountered in clinical and forensic cases. Methanol toxicity is primarily related to its metabolic...

   Neha Afaria, A. K. Jaiswal, ... G. Gokul in Proceedings of the Indian National Science Academy

   Article 27 June 2023
   

4. Electrokinetic Properties of Vitreous Mesoporous Membranes Doped with Silver Iodide

   Abstract

   High-silica mesoporous (pore radii 1.5–1.6 nm, MIP and pore radii 18.4–25.2 nm, MAP) vitreous AgI-doped membranes of the Vycor type have been...

   L. E. Ermakova, A. S. Kuznetsova, ... T. V. Antropova in Glass Physics and Chemistry

   Article 07 August 2022
   

5. Synthesis and Investigation of New Vitreous Materials with Two Magnetic Subsystems (Fe₃O₄ and Mn_xO_y)

   Abstract

   New vitreous composite materials (CMs) with two magnetic subsystems are synthesized by impregnation magnetite-containing matrices from...

   O. A. Pshenko, T. V. Antropova, ... I. N. Anfimova in Glass Physics and Chemistry

   Article 01 June 2023
   

6. Electromagnetic shielding in the X-band of composites based on 3D carbon structures using reticulated vitreous carbon and epoxy resin

   Currently, the use of electro-electronic equipment has been growing, with the consequent increase in electromagnetic pollution, harmful to the...

   Fabiano da Silva Dias, Bruno Ribeiro, ... Mirabel Cerqueira Rezende in Journal of Materials Science: Materials in Electronics

   Article 20 January 2023
   

7. Influence of Sm₂O₃ ion concentration on physical and thermal properties, and Raman gain coefficient of TeO₂–Li₂O–ZnO vitreous system

   In this paper, a vitreous matrix 65TeO ₂ –15Li ₂ O–20ZnO (TLZ) doped with different concentrations of Sm ₂ O ₃ (0.1, 0.15, 0.2, 0.35, 0.5, and 1.0 mol%) was...

   Jaqueline Valeski Gunha, Robson Ferrari Muniz, ... Andressa Novatski in Journal of Materials Science: Materials in Electronics

   Article 27 January 2024
   

8. Modelling of Phase Transitions in the Process of Cryopreservation of Biological Material

   This study focuses on the advancement of new techniques for cryopreservation of reproductive cells at low temperatures, including sturgeon fish. The...

   Andrey Matrosov, Arkady Soloviev, ... Daria Nizhnik in Physics and Mechanics of New Materials and Their Applications

   Conference paper 2024
   

9. Durability of vitreous enamel coatings and their resistance to abrasion, chemicals, and corrosion: a review

   Vitreous enamels represent a class of coatings with different technological properties, mainly appreciated for the protection they guarantee to the...

   Stefano Rossi, Francesca Russo, Massimo Calovi in Journal of Coatings Technology and Research

   Article Open access 05 November 2020
   

10. Effect of Chemical Production Waste — Aluminum–Alkali Sludge on the Phase Composition of Porcelain Stoneware

    This paper discusses the influence of aluminum–alkali sludge and chemical production waste on the phase composition of porcelain stoneware based on...

    E. S. Abdrakhimova, V. Z. Abdrakhimov in Refractories and Industrial Ceramics

    Article 01 May 2023
    

11. Dy³⁺ and Tb³⁺ co-doped boro-phosphate sol–gel vitreous thin films

    Abstract

    A new glass with the molar composition 20B ₂ O ₃ -60P ₂ O ₅ -10ZnO-5Dy ₂ O ₃ -5Tb ₂ O ₃ was obtained by sol–gel method and deposited on silicate glass...

    Bogdan Alexandru Sava, Ana Violeta Filip, ... Mihail Elisa in Journal of Sol-Gel Science and Technology

    Article 30 October 2020
    

12. Composition, Structure, and Properties of Low-Fired Porcelain

    The mechanisms of structure formation in porcelain at low temperature using new unconventional raw materials are presented. It was found that...

    A. M. Eminov, Z. R. Kadyrova, ... I. R. Boizhanov in Glass and Ceramics

    Article 26 July 2022
    

13. Fragmentary Model of the Atomic Structure of the Ion-Conducting Semiconductor Glass AgGeAsSe₃

    Abstract

    The atomic radial distribution function of vitreous AgGeAsSe ₃ , obtained based on the experimental intensity curves taken with monochromatic...

    K. B. Aleinikova, E. N. Zinchenko, N. V. Melnikova in Glass Physics and Chemistry

    Article 01 October 2023
    

14. Injectable PTHF-based thermogelling polyurethane implants for long-term intraocular application

    Background

    Hydrogels show great potential to be used for intraocular applications due to their high-water content and similarity to the native...

    Kaiwen Zhang, Zeng** Liu, ... **an Jun Loh in Biomaterials Research

    Article Open access 02 December 2022
    

15. Recent progress in electrochemical application of Magnéli phase Ti₄O₇-based materials: a review

    Magnéli phases Ti _n O _2n − 1 are a series of sub-stoichiometric titanium oxides with a unique crystal structure, and Ti ₄ O ₇ possesses the highest...

    Weiran Wei, Tingting Yuan, **wen Ye in Journal of Materials Science

    Article 03 October 2023
    

16. Microstructural, mechanical and phase formation behaviour of sintered mullite prepared from kaolinite and reactive alumina: effect of La₂O₃

    Clay and reactive alumina were used to prepare mullite ceramic by wet mixing, followed by the solid-state sintering method. The influence of...

    Pallavi Suhasinee Behera, Sunipa Bhattacharyya in Bulletin of Materials Science

    Article 09 June 2022
    

17. Role of the Liquid Phase in the Formation of the Phase Composition and Characteristics of Structural Cladding Ceramics

    Abstract

    The role of the liquid phase in the formation of the microstructure of a clay tile possessing various physical and engineering...

    N. D. Yatsenko, N. A. Vil’bitskaya, A. I. Yatsenko in Glass Physics and Chemistry

    Article 01 January 2021
    

18. Phase evolution and properties of glass ceramic foams prepared by bottom ash, fly ash and pickling sludge

    Municipal solid waste incineration products of bottom ash (BA), fly ash (FA), and pickling sludge (PS), causing severe environmental pollution, were...

    Junjie Zhang, **aoyan Zhang, ... Shengen Zhang in International Journal of Minerals, Metallurgy and Materials

    Article 27 January 2022

19. Preparation and microstructure analysis of fly ash continuous fiber

    A new type of inorganic fiber-fly ash continuous fiber was innovatively developed in this study to alleviate the problems of low comprehensive...

    **aolong Jia, Chong Wang, ... Zheng Fang in Journal of Materials Science

    Article 15 March 2023
    

20. Synthesis, phase stability and chemical leaching behavior of Nd-doped CaTiO₃ perovskite ceramics for radioactive waste immobilization

    Perovskite ceramic is a component of the SYNROC polyphase waste form, designed to immobilize trivalent minor actinides and radioactive Sr resulting...

    Nouar Bensemma, Dalila Moudir, ... Aicha Maachou in Journal of the Australian Ceramic Society

    Article 24 April 2023