Search
Search Results
-
Development of Ultralight Binary Mg-Li Alloys: Enhancing Dam**, Ductility, and Ultimate Compressive Strength beyond 2000 MPa
In this study, we design ultralow density Mg−8.4Li (~ 1.46 g/cc), and Mg-9Li (~ 1.44 g/cc) alloys processed by Disintegrated Melt Deposition (DMD)...
-
Compressive strength degradation of engineered bamboo subjected to fungal attack
Glue laminated bamboo (glubam) is a type of engineered bamboo material developed for applications in building structures and interiors. This paper...
-
Impact of End Friction and Lateral Inertia Confinement on the Dynamic Compressive Performance of Standard and High-Strength Concrete
Present study focused on to investigate the impact of end friction and lateral inertia on the dynamic properties of concrete obtained by performing...
-
Residual Compressive Strength of Aluminum Honeycomb Sandwich Structures with CFRP Face Sheets after Low-velocity Impact
Composite sandwich structures are sensitive to low velocity impact (LVI) occasions and the induced damage significantly reduces the residual...
-
Calibrating a New Compressive-to-Tensile Load-Transferring Device for Determining the Direct Tensile Strength of Granite
The direct tensile strength of hard rocks such as granite was measured using hollow disk-type specimens in the form of rock rings. These specimens...
-
Effect of Silicon Dioxide-Graphene Content on the Microstructure, Sliding Wear Behavior, and Compressive Strength of Aluminum Hybrid Composites
In the present work, aluminum matrix composites reinforced with graphene nanoplatelets (GNPs: 0.15-0.45wt.%) and silicon dioxide (SiO 2 : 1, 3, 6,...
-
Improving the Accuracy of ACI 318-08 Design Standard for Predicting Strength of CFST Columns Using Machine Learning
This study proposes a new modified ACI 318-08 formula based on machine learning (ML) to forecast better the compressive strength of Concrete-Filled...
-
High-Temperature Behavior of Superalloy XH 62 in Compressive and Tensile Modes
Superalloy XH 62(Ni-Cr-Mo-Fe-Al) is studied for its high-temperature behavior under compressive and tensile mode of deformation at elevated...
-
A Procedure for the Numerical Determination of the Strength Criterion Parameters of a Three-Dimensionally Reinforced Composite Material
A numerical procedure for determining the parameters of the quadratic strength criterion for composite materials is presented, which considers the...
-
Enhancing Compressive Stress–Strain of Ti55531 Alloy via La-Rich Nanoscale Structure at Grain Boundaries
For multi-component Ti alloys, their room temperature compressive stress–strain are relatively low. Addition of La can promote the formation of α...
-
Effect of Aging Precipitation Behavior of Ti2Ni Phase on Compressive Properties of 54NiTi Alloy
In this paper, the precipitation behavior and strengthening mechanism of the Ti 2 Ni phase in 54NiTi alloy during aging treatment were systemically...
-
Coking Coal Macromolecular Structural Characteristic and Its Correlations with the Compressive Strength of CaO-Containing Carbon Pellets
CaO-containing carbon pelletsCaO-containing carbon pellets (CCCP) preparing from well-mixed coking coal (CC) and calcium oxide (CaO) were roasted at...
-
Quantitative Insight into the Compressive Strain Rate Sensitivity of Polylactic Acid, Acrylonitrile Butadiene Styrene, Polyamide 12, and Polypropylene in Material Extrusion Additive Manufacturing
Herein, a research and engineering gap, i.e., the quantitative determination of the effects of the compressive loading rate on the engineering...
-
Effect of T6 and T6I4 Aging Treatments on Microstructure and Compressive Properties of Aluminum Metal Matrix Composites Reinforced by SiCw Via Squeeze Casting
The microstructure and compressive properties of the 7xxx series aluminum alloy (Al – 12.44Zn – 3.22Mg – 1.13Cu – 0.19Zr – 0.12Sr) reinforced with...
-
Outstanding strength and conductivity of metallic glass composites with multiscale configuration
Cu-based composites with multiscale configuration for electrical contact applications are fabricated via a ball milling (BM)-spark plasma sintering...
-
The Compressive Strength of Confined Concrete Stub Column Reinforced with GFRP Bars-Effect of Reinforcement Ratio and Bar Diameter
Confined concrete columns composed of core concrete and encasing tubes replaces most of the RCC columns in civil structures. To enhance the...
-
Comparative Confined Compressive Strengths of Normal Concrete and HPFRC in Experiment and Model
This paper comparatively shows the confined compressive strengths of normal concrete (NC) and high-performance fiber-reinforced concrete (HPFRC) in...
-
Devitrification-Induced Tailoring of Microstructure and Strength in Aluminum High-Entropy Alloy Powder for Cold Spray Deposition
The development of high-strength cold spray deposits using amorphous/nanocrystalline aluminum high-entropy alloy (Al HEA) powder is hindered by the...
-
Structural transformation of Ti-based alloys during tensile and compressive loading: An insight from molecular dynamics simulations
In this study, we investigated the structural alterations that occur when Ti-based alloys, namely, Ti x % Al (100- x )% and Ti x % Ni (100- x )% , are subjected...
-
Smart Piezoresistive Plaster of Paris for Real-Time Monitoring of Curing and Compressive Stress Changes Quantified Using Vipulanandan Models
Based on the physical and thermal properties, plaster of paris (P-O-P) has been used in many applications including the medical field and...
