Search
Search Results
-
Influence of Plastic Anisotropy and Strain path on strain-induced Phase Transformation of Cobalt
The objective of this paper is to contribute to a better understanding of the deformation mechanisms of a rolled polycrystalline cobalt sheet. In...
-
From Strain Softening to Strain Hardening in Submicron Scale Ti2448 Associated with Slip Mode Transition Mediated by Nanoscale Martensitic Transformation
Effects of the stress-induced nanoscale α″ martensitic transformation (SINMT) on the deformation behavior of Ti-24Nb-4Zr-8Sn (Ti2448) alloy at...
-
The Use of Strain-Induced Martensitic Transformation Phenomena to Estimate the Surface Plastic Strain Produced by Grit Blasting on Overaged 18Ni Maraging Steel
In the present study, strain-induced martensitic transformation has been used to estimate plastic strain resulting from grit-blasting in 18Ni(300)...
-
A More General Orthotropic Strain-Rate Potential Based on the Linear Transformation Method
A strain-rate potential (SRP) can be used in place of the classical stress potential to describe the response of plastically deforming solids.... -
Deformation Mode and Strain Path Dependence of Martensite Phase Transformation in QP980 Steel
The martensite phase transformation dependence upon deformation modes and strain paths in QP980 steel formed into a T-shape panel was studied through...
-
Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel
In this paper, mechanical properties and microstructure evolution of an economical 19Cr-type TRIP-aided duplex stainless steel were investigated...
-
Effect of Rolling Temperature on Martensitic Transformation and Strain Hardening of Fe–21.2Mn–0.68C Steel
In this work, the temperature dependence of the stacking fault energy (SFE) of Fe–21.2Mn–0.68C steel was calculated using the thermodynamic model....
-
Dynamic Deformation of Low-Alloyed Transformation-Induced Plasticity-Aided Steel from Low to High Strain Rates
Dynamic deformation behavior of a cold-rolled Fe-1.47Mn-1.40Si-0.21C-0.025Nb transformation-induced plasticity (TRIP)-aided steel was studied at...
-
Effect of phase transformation strain on the quasi-linear elastic deformation behavior for Nb/Ni50.3Ti49.7 composite
AbstractThe effect of the evolution of phase transformation strain on the quasi-linear elastic deformation behavior for Nb/Ni 50.3 Ti 49.7 composite...
-
Stress–Strain and Fluid Flow
In this chapter first a multi-phase-field model considering transformation strain and elastic energy is developed. It utilizes the expansion into... -
Resolving the Martensitic Transformation in Q&P Steels In-Situ at Dynamic Strain Rates Using Synchrotron X-ray Diffraction
The dynamic deformation response of two quenching and partitioning (Q&P) steels was investigated using a high strain rate tension pressure bar and in-situ...
-
Superior Strain Rate Strengthening Effect and Ductility of a Ti-4.5Al-2.9V-3Fe Alloy under High Strain Rate Loading
The mechanical response of the Ti-4.5Al-2.9V-3Fe alloy demonstrates a significant strain rate strengthening effect and strong ductility at high...
-
Finite Strain Constitutive Modelling of Shape Memory Alloys Considering Partial Phase Transformation with Transformation-Induced Plasticity
This paper presents a unified modelling effort to describe partial phase transformation during cyclic thermo-mechanical loading in Shape Memory...
-
Efficient finite strain elasticity solver for phase-field simulations
We present an effective mechanical equilibrium solution algorithm suitable for finite strain consideration within the phase-field method. The...
-
Interpretation of Dynamic Strain Aging in an Intercritical Annealed Steel by Dislocation Multiplication Induced by Martensitic Transformation
To elucidate the dynamic strain aging (DSA) mechanism that causes serrated flow in the tensile curves of an intercritical annealed steel with...
-
Flow Characteristics Analysis of TC18 Titanium Alloy during Hot Deformation Based on Phase Transformation
An accurate flow stress model was established by considering the parameters of strain rate, strain and temperature as well as β → α + β phase...
-
The innate interfacial elastic strain field of a transformable B2 precipitate embedded in an amorphous matrix
When a transformable B2 precipitate is embedded in an amorphous matrix, it is often experimentally observed that the crystalline-amorphous interface...
-
Phenomenological Modeling of Deformation-Induced Martensite Transformation Kinetics in Austenitic Stainless Steels
The aim of this study is to predict the kinetics of deformation-induced martensite transformation (DIMT) by proposing a novel model considering the...
-
Observation of Transformation Strain Arrest During Partial Thermomechanical Cycling of an NiTi Shape Memory Alloy
In the present study, an arrest in transformation strain was observed during the partial thermomechanical cycling (thermal cycling under constant...
-
The Structure and Martensitic Transformation of Deformed Ni−Mn−Ga Alloys
AbstractThe results of the study of the influence of multi-axial isothermal forging on the microstructure and martensitic transformation in a Ni 58 Mn 18...