Search
Search Results
-
Simultaneously enhanced interfacial shear strength and tensile strength of heterocyclic aramid fiber by graphene oxide
Heterocyclic aramid fibers, a typical kind of high-performance fibers, have been widely used in aerospace and protection fields because of their...
-
Relation Between Interface Geometry and Tensile Shear Strength of Ultrasonically Welded Joints
The reliable use of ultrasonic metal welding requires a thorough understanding of the relevant bonding mechanisms. This article presents an approach...
-
Study on prediction of tensile-shear strength of weld spot based on an improved neural network algorithm
Spot welding is one of the main connection methods of automobile parts. The tensile-shear strength of spot welding joint is the most important...
-
Workmanship Impact on Raw Earth Masonry Tensile Strength
Earthen masonry has observed a resurgence of interest in recent years with the urgent need to address climate change. However, its use can be...
-
Investigating the Effect of Electrode Pressure on Nugget Size, Microstructure and Tensile Shear Strength of Resistance Spot Welded Advanced High Strength Dual Phase Steel Joints
The main objective of this investigation is to study the effect of electrode pressure on nugget formation, microstructural features and tensile shear...
-
Study on the Tensile and Shear Behaviors of Selective Laser Melting Manufactured Ti6Al4V
The deformation and failure of Ti6Al4V produced by Selective Laser Melting (SLM) under tensile and shear stress states have been experimentally...
-
Tensile and Shear Creep Behavior of Structural Adhesives: Experiments and Modeling
Structural adhesives characterized a turning point in the post-connection of structural elements due to their excellent performances and ability to...
-
Evaluation of Tensile Strength for 3D-Printed PLA Specimens
Additive manufacturing (AM) technology plays a vital role in manufacturing components for the validation of designs. However, the strength of...
-
A Study on Tensile Strength Attributes of Jute Fiber-Reinforced Polyester Composite
Natural fiber have shown great advantages over synthetic fibers due to the ease of its availability. The alkali treatment for these fibers enhances...
-
The Correlation Between Bending, Tensile and Charpy Impact Properties of Ultra-high-Strength Strip Steels
Two different ultra-high-strength B-containing steel strips, one treated with Ti and the other treated with Al, processed by controlled rolling,...
-
Microstructural characterization and tensile strength of TiC/Ni-20Cr composite through the small punch test technique
The tensile strength and fracture mode of the TiC/Ni-20Cr composite were determined through the small punch technique (SPT). The composite was...
-
Calibrating a New Compressive-to-Tensile Load-Transferring Device for Determining the Direct Tensile Strength of Granite
The direct tensile strength of hard rocks such as granite was measured using hollow disk-type specimens in the form of rock rings. These specimens...
-
Biomimetic vascular tissue engineering by decellularized scaffold and concurrent cyclic tensile and shear stresses
Decellularization by chemical approaches has harmful effects on extracellular matrix (ECM) proteins, and damages lots of functional peptides and...
-
Effect of Heat Treatment on the Shear Strength of SiC/PyC/SiC Composites
In this study, the influence of heat treatment on the shear strength of SiC/SiC composites at room temperature and its causes were investigated....
-
Role of Grain Boundary Strength on Yielding Behavior and Uniaxial Tensile Properties in Ferritic Steels
The yield-point phenomenon in recrystallized ferritic steels is often associated with the dislocation multiplication mechanism, wherein the yield...
-
Modeling and Optimization of Shear Strength of the Welded Joint Produced by Ultrasonic Welding of Copper Wire to Aluminum Sheet
Ultrasonic welding is a subset of frictional solid-state joining processes. This process, with its ability to join thin and dissimilar metallic...
-
Interfacial microstructure, shear strength and wettability of Ni-added Sn-0.3Ag-0.7Cu/Cu solder joint
This study investigates the effect of Ni additions of 0.05 and 0.1 wt% on the properties of SAC0307/Cu solder joints. The interfacial microstructure,...
-
Effect of Mg Content on the Shear Strength of Al-Si-Mg and Al-Si-Cu Alloys at Elevated Temperatures
Die soldering in the die casting process is observed as aluminum bonded to the die surface and has historically been associated with Al–Fe...
-
Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates
In the development of innovative lightweight solutions in automotive engineering, the use of the mechanical joining technique clinching offers the...
-
Effect of Wobbling Loops with Laser Welding Characteristics to the Shear Strength of Cu/Al Lap Joints for Battery Applications
Manufacturing, automotive, and aerospace industries choose fibre laser welding. These industries prefer fibre laser welding because the technology...