Search

Search Results

1. Highly reversible extrinsic electrocaloric effects over a wide temperature range in epitaxially strained SrTiO₃ films

   Electrocaloric effects have been experimentally studied in ferroelectrics and incipient ferroelectrics, but not incipient ferroelectrics driven...

   S. Zhang, J. Deliyore-Ramírez, ... N. D. Mathur in Nature Materials

   Article Open access 21 March 2024
   

2. Raman strain–shift measurements and prediction from first-principles in highly strained silicon

   This work presents how first-principles simulations validated through experimental measurements lead to a new accurate prediction of the expected...

   Nicolas Roisin, Marie-Stéphane Colla, ... Denis Flandre in Journal of Materials Science: Materials in Electronics

   Article 04 February 2023
   

3. Effects of Aging Temperature on the Mechanical Properties and Precipitation Behavior of a Pre-strained Al–Cu–Mg–Ag Alloy

   Abstract

   In this work, effects of artificial aging temperature on the mechanical properties and precipitation behavior of a pre-strained Al–Cu–Mg–Ag...

   Jian Wang, **gpei **e, ... Wenyan Wang in Metals and Materials International

   Article 08 June 2022
   

4. Torsion strained iridium oxide for efficient acidic water oxidation in proton exchange membrane electrolyzers

   Acidic oxygen evolution reaction is crucial for practical proton exchange membrane water splitting electrolysers, which have been hindered by the...

   Shaoyun Hao, Hongyuan Sheng, ... Song ** in Nature Nanotechnology

   Article 25 October 2021
   

5. Continuous Two-Zone In Vitro Co-culture Model of the Enthesis

   The enthesis is the interfacial tissue between ligament or tendon, and bone, which connects tissues of distinctly different mechanical properties....

   Hyeree Park, Megan E. Cooke, ... Derek H. Rosenzweig in Biomedical Materials & Devices

   Article 19 September 2022
   

6. Plasticity of Coarse Martensite Laths Within the Heat-Affected Zone of 9Ni Steel Girth-Welded Pipes

   Presenting a low Ductile–Brittle transition temperature compared to other body-centered cubic structural steels, lath martensitic steels, such as 9Ni...

   Pedro P. N. Maia, Émerson M. Miná, ... Cleiton C. Silva in Metallurgical and Materials Transactions A

   Article 23 August 2023
   

7. Hardness Prediction of the Heat-Affected Zone in Multilayer Welded SUS316 Stainless Steel Based on Dislocation Density Change Behavior

   The effects of strain hardening and recovery/recrystallization on the hardness of the heat-affected zone (HAZ) in multilayer welded austenitic...

   Lina Yu, Kazutoshi Nishimoto, ... Kazuyoshi Saida in Metallurgical and Materials Transactions A

   Article Open access 19 March 2024
   

8. Analytical Calculation of Exciton Binding Energy, Quasi-Particle Band Gap and Optical Gap in Strained Mono-layer MoS₂

   Strain in two-dimensional (2D) materials induces shifts in the visible spectrum due to strained binding energies, an accurate study of which is...

   S. Ahmad, M. Zubair, ... U. Younis in Journal of Electronic Materials

   Article 31 January 2021
   

9. Effect of Pre-strain on Microstructure and Corrosion Behavior of a Novel High-Zn Containing Al-Zn-Mg-Cu Alloy

   The effect of pre-strain on microstructure, mechanical property and corrosion behavior of a novel high-Zn containing Al-Zn-Mg-Cu alloy was...

   Mengjun Long, Feng Jiang, ... Yuanming Su in Journal of Materials Engineering and Performance

   Article 20 May 2024
   

10. Biaxial strained dual-phase palladium-copper bimetal boosts formic acid electrooxidation

    Surface strain engineering is considered as an effective strategy to promote the electrocatalytic properties of noble metal nanocrystals. Herein, we...

    Jiarun Geng, Zhuo Zhu, ... Jun Chen in Nano Research

    Article 16 April 2021
    

11. Effect of NaCl and Na₂SO₄ on Low Temperature Corrosion of Vapour- and Pack-Aluminide Coated Single Crystal Turbine Blade Alloys CMSX-4 and RR3010

    The current work presents a systematic study of two alloy compositions (RR3010 and CMSX-4) and two types of coatings: inward grown (pack) and outward...

    J. Tjandra, A. Ranjan, ... S. Pedrazzini in Metallurgical and Materials Transactions A

    Article Open access 06 June 2023
    

12. Effect of Pre-strain on Microstructure and Stam** Performance of High-strength Low-alloy Steel

    In this study, pre-strain ranging from 0 to 0.12 was applied through uniaxial tension on high-strength low-alloy (HSLA) specimens with four kinds of...

    Po Liu, Zhicheng Wen, ... Feng Xu in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 03 June 2024

13. Corrosion Behavior of Strained Rebar in Simulated Concrete Pore Solution

    Parts of reinforcing steel bar (rebar) used in concrete are subjected to high levels of plastic strain due to various operations during construction....

    Prasanna Kumar Behera, Sudhir Misra, K. Mondal in Journal of Materials Engineering and Performance

    Article 04 March 2020
    

14. Effect of Bismuth on the Structural Perfection of Elastically Strained AlGaInSbBi Epitaxial Layers Grown on InSb Substrates

    Abstract

    The effect of bismuth on the structural perfection of elastically strained AlGaInSbBi epitaxial layers grown on InSb substrates in a...

    D. L. Alfimova, M. L. Lunina, ... A. N. Yatsenko in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

    Article 01 July 2020
    

15. Indentation size effect in 2nd and 3rd generation advanced intermetallic TiAl alloys: theoretical and experimental estimation of dislocation density

    The present study focuses on characterizing the mechanical properties of as-cast and heat-treated 2nd and 3rd generation intermetallic TiAl alloys,...

    Prekshya Nath, Amit Bhattacharjee, Indrani Sen in Journal of Materials Science

    Article 01 February 2024
    

16. The Influence of Plastic Strain and Microstructure on the Electrochemical Noise Response of AA 7004 in 0.6 M NaCl

    The role of applied strain in altering the nature of corrosion attack on AA 7004 having two different microstructures is studied using...

    Rahul Kumar Agrawal, Namrata Upadhyay, V. S. Raja in Transactions of the Indian Institute of Metals

    Article 24 August 2023
    

17. Methods of Determining the Endurance Limit of Butt Weld Joints after High-Frequency Mechanical Peening

    The effect of high-frequency mechanical peening conditions on the fatigue resistance of 3sp steel butt weld joints was studied. Different techniques...

    V. O. Degtyarev in Strength of Materials

    Article 01 May 2022
    

18. Effect of Welding Microstructure on Stress Relaxation Cracking Studied by Controlled Residual Stress Generation in a 316L(N) Austenitic Stainless Steel

    The influence of heterogeneous welding microstructure on the stress relaxation cracking (SRC) in the SRC-resistant 316L(N) steel was investigated. To...

    Baptiste Py-Renaudie, Diogo Goncalves, ... Thilo F. Morgeneyer in Metallurgical and Materials Transactions A

    Article 29 September 2023
    

19. Abnormal Evolution of Pitting Behavior of Warmly Pre-Strained Austenitic Stainless Steels

    The effect of warm pre-strain on the corrosion behavior of 304 and 316 steels in 3.5% NaCl solution was first explored by electrochemical tests,...

    Huimin Tao, Chengshuang Zhou, ... **yang Zheng in Journal of Materials Engineering and Performance

    Article 09 November 2020
    

20. Multi-messenger nanoprobes of hidden magnetism in a strained manganite

    The ground-state properties of correlated electron systems can be extraordinarily sensitive to external stimuli, offering abundant platforms for...

    A. S. McLeod, **gdi Zhang, ... D. N. Basov in Nature Materials

    Article 16 December 2019