Search
Search Results
-
High Strain Rate Hardening of Metallic Cellular Metamaterials
Strain rate hardening caused by the changed deformation mode is a fascinating phenomenon in cellular metamaterials where the material’s stiffness and...
-
Wire Drawing Behaviors with Die Angle and Strain Hardening Rate of a Metal
This study investigated the influences of the die angle ( α ) and strain hardening rate of a metal on the microstructure, hardness, strain,...
-
Strain Rate-Dependent Anomalous Work Hardening of a Single-Crystalline CoNi-Base Superalloy
The deformation mechanisms operating in superalloys depend on different parameters such as composition, temperature and deformation rate. So far, the...
-
Effect of Uniaxial Pre-strain on Tensile, Work Hardening, Fracture Toughness, and Fatigue Crack Growth Rate of Titanium Alloy Ti–6Al–4V
In this study, the effect of plastic deformation on strength, work hardening behavior, fracture toughness (FT, J Ic ), and fatigue crack growth rate...
-
Strain Hardening and Adiabatic Heating of Stainless Steels After a Sudden Increase of Strain Rate
This study focuses on the strain hardening and adiabatic heating of two stainless steels after a sudden increase of strain rate. Tensile tests were...
-
Strain Hardening of Rail Steel
Abstract —A quantitative analysis of the hardening mechanisms of rail steel under compressive conditions has been performed using the results of...
-
Melt strain hardening of polymeric systems filled with solid particles: review and supplementary experimental results
Melt strain hardening is an interesting characteristic property of the elongational flow of polymers. While strain hardening of many unmodified...
-
Unveiling the relationship between dislocation structure evolution and strain hardening behavior of S32654 super-austenitic stainless steel
Understanding the relationship between dislocation structure evolution and strain hardening behavior is crucial for the development of high-strength...
-
Pockets of strain-softening and strain-hardening in high-strength Cu-24wt%Ag sheets
To study plastic deformation behavior in high-strength Cu–Ag nanostructured composites, we compared (1) overall stress–strain curves with local...
-
Strain Rate-Dependent Hardening Behavior of Weld Metal in Laser Welded Blanks with GEN3 AHSS
This paper introduces the effects of the strain rate on the hardening behavior of weld metal in laser welded blank (LWB)Laser welded blank (LWB) with... -
From Strain Softening to Strain Hardening in Submicron Scale Ti2448 Associated with Slip Mode Transition Mediated by Nanoscale Martensitic Transformation
Effects of the stress-induced nanoscale α″ martensitic transformation (SINMT) on the deformation behavior of Ti-24Nb-4Zr-8Sn (Ti2448) alloy at...
-
Microstructure, Texture Evolution, and Strain Hardening Behaviour of As-extruded Mg-Zn and Mg-Y Alloys under Compression
Microstructure, texture evolution and strain hardening behaviour of the Mg-1Y and Mg-1Zn (wt%) alloys were investigated under room temperature...
-
Effect of Strain Hardening on Wear and Corrosion Resistance of 316L Austenitic Stainless Steel
The wear and corrosion resistance of 316L austenitic stainless steel after strain hardening were studied. 316L austenitic stainless steel was...
-
Automated Calculation of Strain Hardening Parameters from Tensile Stress vs. Strain Data for Low Carbon Steel Exhibiting Yield Point Elongation
Existing guidance from ASTM standards on extracting mechanical properties from uniaxial tension test data is not suitable for high-volume...
-
Strain Rate-Dependent Tensile and Fracture Properties of Low-Carbon Ferritic Low-Density Steels
The study investigated the tensile properties of two low-carbon ferritic low-density steels at strain rates of 1 × 10 −4 s −1 , 1 × 10 −3 s −1 , and 1 × 10 −2...
-
Various features of melt strain hardening of polymeric materials in uniaxial extension and their relation to molecular structure: review of experimental results and their interpretation
Strain hardening of polymer melts is able to improve the uniformity of items in processing operations with elongational deformation. Of particular...
-
Effects of Grain Size and Cryogenic Temperature on the Strain Hardening Behavior of VCoNi Medium-Entropy Alloys
The mechanical behavior of VCoNi medium-entropy alloys with five different grain sizes at three different temperatures was investigated. The VCoNi...
-
Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect
Strain hardening properties of AA5182-O metal sheet are experimentally studied and analytically modeled at different temperature in this research... -
Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic stainless steel
Hot compression tests were performed on AISI 321 austenitic stainless steel in the deformation temperature range of 800–1200°C and constant strain...
-
Kinematic Strain Hardening of Fe-TiB2 Composite: Experimental Analysis and Phenomenological Modeling
A combined experimental and modeling study of strain hardening and backstresses of an iron-based Metal Matrix Composite MMC (Fe-TiB 2 ) is presented....