Search
Search Results
-
Using Solution Heat Treatment and Multi Directional Forging to Improve the Mechanical and Corrosion Properties of an Mg–2Zn–0.2Ag Alloy
This study investigated the effects of solution heat treatment and multi-directional forging (MDF) on the microstructure, mechanical, and corrosion...
-
Improvement of Corrosion Resistance of Mg-3Sn-2Al-1Zn Alloy by Heat Treatment and Y/Nd Addition
AbstractThe electrochemical corrosion behavior of Mg-3Sn-2Al-1Zn-(0.6Nd/0.6Y) alloy in 3.5 wt.% NaCl solution under different heat treatment...
-
Effect of Heat Treatment Conditions and Cryogenic Treatment on Microhardness and Tensile Properties of AZ31B Alloy
The effect of heat treatment and cryogenic treatment on the microstructure, tensile properties, and microhardness of the rolled (R) AZ31B magnesium...
-
Direct Laser-Deposited IN718 Alloy: Effect of Heat Treatment Route on Microstructural Evolution and Mechanical Properties
The laser-based additive manufacturing techniques are widely used for the refurbishment of worn-out components. The post-processing treatments on...
-
Effect of Heat Treatment on the Properties of a High Alloying Maraging Steel Fabricated by Laser Metal Deposition
Traditional maraging steels are not able to satisfy the development of modern industry. Optimizing the properties of maraging steels is now a...
-
Effects of Thermal Deformation and Heat Treatment on Microstructure and Texture of Hot Isostatic Pressured Ti-6Al-4 V Alloy
The effect of thermal deformation and heat treatment on microstructure and texture of Ti-6Al-4 V alloy was investigated. As for the deformed...
-
Influence of Heat Treatment on the Structure, Phase Composition and Properties of Deformable Hard-Magnetic Fe–30Cr–20Co–2Mo Powder Alloy
AbstractThe structure, phase composition, mechanical and magnetic properties of deformable hard magnetic Fe–30Cr–20Co–2Mo alloy obtained by sintering...
-
Effect of Post-Weld Heat Treatments on Microstructure and Mechanical Properties of Friction Stir Welding Joints of AA2014 and AA7075
The present work investigates the influence of post-weld heat treatments (PWHT) on friction stir welded joints of AA2014 and AA7075 dissimilar...
-
Effect of deformation and heat treatment parameters on the microstructure and properties of forged TB18 titanium alloy
TB18 titanium alloy is a near- β -titanium alloy with high strength and good plasticity. However, its microstructure and mechanical properties are...
-
High Temperature Oxidation Resistance of TB8 Titanium Alloy after Equal Channel Angular Pressing and Heat Treatment
In this paper, the metastable β titanium alloy TB8 (Ti-12.76Mo-2.13Nb-2.73Al-0.16Si) was used as the starting material, and the secondary processing...
-
Study on the Formation of (Co,Ni)O Solid Solution and Metallic Ni Phases During Suspension Plasma Spraying of CoO and NiO Powders
SPS-sprayed (Co,Ni)O coating was investigated as a potential material for inert anode applications in Al production. In-flight particles were...
-
Tailoring the As-Cast Microstructure of Twin-Roll Cast AA3105 Alloy Produced by St/Cu Shell Pair
Extracting the heat from the liquid metal with the help of the water-cooled caster rolls (designed with core and shrink-fitted shell) and then... -
Engineered Aluminum Powder Microstructure and Mechanical Properties by Heat Treatment for Optimized Cold Spray Deposition of High-Strength Coatings
The lack of a comprehensive understanding of the role of heat treatments on microstructure and multiscale mechanical properties of powders and their...
-
High Strength and Excellent Ductility of AZ80 Magnesium Alloy Cabin Component Developed by W-Shaped Channel Extrusion and Subsequent T6 Heat Treatment
The AZ80 magnesium (Mg) alloy cabin component with high strength and excellent ductility was developed by W-shaped channel extrusion (WCE) at 350 °C...
-
Effect of Heat-Treatment Conditions on the Microstructure and the Static Fracture Toughness of an α + β VT23 Titanium Alloy
AbstractThe mechanical properties and microstructure of an α + β VT23 titanium alloy are studied after quenching under various conditions and...
-
Flash sintering of tantalum-hafnium diboride solid solution powder
In this study, flash sintering of single-phase tantalum-hafnium diboride solid solution powder (Ta 0.5 Hf 0.5 B 2 ) was demonstrated. Flash-sintering...
-
Anisotropy of Hastelloy X Prepared by Selective Laser Melting After Hot Isostatic Pressuring and Heat Treatment
Anisotropy of selective laser-melted Hastelloy X alloys after hot isostatic pressing and heat treatment (HIP + HT) is investigated. Microscopic...
-
Effect of Keyhole Gas Tungsten Arc Welding and Post-welding Heat Treatment on Microstructure and Hardness of Inconel 740H
Keyhole mode gas tungsten arc welding (GTAW) is used to obtain crack-free full-penetration welds in Ni-base superalloy Inconel 740H. Associated...
-
Processing, Microstructure Evolution, and Heat Treatment Response of AA2024 and Its Metal Matrix Composites of In Situ TiB2 Dispersoids
Aluminum-based metal matrix composites (MMCs) have drawn considerable attention in aerospace applications due to their superior mechanical...
-
Appropriate Heat Treatment Procedures for Improving Strength and Quality Index in 354 Casting Alloys
In the current study, the influence of solution heat treatment and aging conditions on the strength and quality index of 354 castings was...