Search
Search Results
-
Effect of Al addition and rolling reduction on microstructure and texture evolution of Mg–3Sn alloy during high-speed rolling
In this study, high-speed rolling is conducted on Mg– x Al–3Sn ( x = 0, 3, 6) alloys with different reductions (20%, 40%, 60%, and 70%), at a high speed...
-
Effect of Rolling Pass on Porosity Void Closure of Bloom during Hot-Core Heavy Reduction Rolling
Some heavy reduction technologies near the solidification end have been gradually applied to casting slabs or blooms in recent years to eliminate...
-
Metal Rolling
Rolled metallic products find wide applications in building construction, the automotive industry, the aerospace industry, the defense sector, and...
-
The Effect of Rolling Reduction on the Microstructure, Mechanical, and Dam** Properties of Mg-1.0 wt.% Al Alloy
High temperature and high strain rate rolling of Mg-1.0 wt.% Al alloy at 20, 50, and 80% rolling reduction were used to investigate the effect of...
-
Effect of the Reduction during Cold Rolling on the Phase Composition, Texture, and Residual Stresses in 20Kh15AN3MD2 Steel
AbstractX-ray diffraction is used to determine the influence of the reduction during cold rolling of wedge steel 20Kh15AN3MD2 samples on the...
-
Effect of Rolling Reduction on Microstructure and Formability of a Ferritic Stainless Steel
The rolling process is crucial in the process design for achieving good formability of ferritic stainless steel. A comparison is made between hot...
-
Reducing Mechanical Anisotropy in Dual-Phase Mg-9Li-1Zn Alloy by Control of Single-Pass Reduction during Asymmetric Rolling
The reduced processability in Mg-Li alloy through rolling deformation deserves attention. Herein, an asymmetric rolling test is carried out on a of...
-
Effects of Cold Rolling Reduction, Austenitizing Temperature and Dwell Time on Microstructure of the AS150 Coating
The drive to combine Tailor-rolled blank technology with AS150-coated hot stam** technology is growing stronger with the increasing demand for...
-
Influence of the Cold Rolling Reduction Ratio and the Final Annealing Temperature on the Properties and Microstructure of Al–Mg–Sc Alloy Sheets
AbstractThe effect of the cold rolling reduction ratio (ε h ) on the microstructure and the complex of mechanical and technological properties of...
-
Lateral Spread in Industrial Hot Rolling Processes
The lateral deformation in hot rolling has been investigated with finite element method for different geometries of billets, temperature gradients...
-
Temperature Influence on Section Uniformity of Casting Steel Rolled with the Hot-Core Heavy Reduction Rolling Process and Traditional Hot Rolling Process
Hot-core heavy reduction rolling (HHR 2 ) is an innovative technology that uses a temperature gradient to improve the core quality of continuously cast...
-
Interface-reaction reduction and hot rolling deformation of network structured graphene-TiB whiskers/Ti6Al4V composites by spark plasma sintering
For the sake of reducing the interface reaction between graphene (GR) reinforcement and Ti6Al4V (TC4) alloys matrix, the nano-TiB 2 particles were...
-
Investigations on Warm Rolling and Post-Rolling Aging of 7075 Alloy
AbstractThe effect of warm rolling and three aging treatments on microstructure and mechanical properties of 7075 alloy was investigated via optical...
-
Ways to improve the processes of longitudinal rolling on a pipe rolling plant with a plug mill to reduce metal consumption and increase production output
The paper describes the results of implementing modified designs of the working tools of a plug rolling mill. The plug design is modified to improve...
-
Microstructure Evolution and Property of Spray-Formed Cu-10 wt% Fe Alloy During Cold Rolling
In order to obtain homogeneity and fine-scale microstructure of Cu–Fe alloy, a Cu-10 wt% Fe alloy slab was prepared by spray forming. The effects of...
-
Influence of Cold-Rolling Reduction on Microstructure and Tensile Properties of Nuclear FeCrAl Alloy with Low Cr and Nb Contents
FeCrAl alloy is one of the most promising candidates as an accident-tolerant fuel (ATF) cladding material. Herein, the influence of cold-rolling (CR)...
-
Influence of Cold Rolling on the Microstructure and Mechanical Properties of FeCoCrNiMn High-Entropy Alloy
This study delved into the influence of room temperature rolling on an FeCoCrNiMn high-entropy alloy. Initially, the alloy was synthesized via vacuum...
-
Rolling Texture and Mechanical Properties Correlation among the Alloys Ni-16Cr, Ni-16Mo, and Ni-16Cr-16Mo
In this study, an excellent correlation has been established between the microstructure, texture, and mechanical properties of cold-rolled Ni-16Cr,...
-
Microstructure, Mechanical, and Corrosion Properties of Mg-Zn-Ga Alloy after Hot Rolling
The effect of hot rolling on the structure and mechanical properties of the Mg-2Zn-2Ga (wt.%) alloy has been studied. The original cast alloy plates...
-
Microstructure and Texture of Ultra-High Purity Copper under Changed Rolling Strain Paths and Subsequent Recrystallization Annealing
AbstractFor advanced integrated circuits semiconductor chip, the uniformity of microstructure and texture is increasingly required for copper target...
