Search
Search Results
-
Behavioral Features of the Approach Curve of a Scanning Ion-Conductance Microscope
AbstractThe operation of a scanning ion-conductance microscope is based on the assumption that the ion current I ( z ) flowing through the narrow...
-
Precise thermoluminescence glow curve analysis of BeO ceramic plates with slow heating rates
The glow curve components and thermoluminescence (TL) parameters of BeO ceramics plates with high bioequivalence were analyzed using extremely slow...
-
Stress-Free Determination of Yield Locus and Flow Curve Parameters by Partial Full-Field Measurements
Full-field deformation measurement is used for many approaches in material characterization. To the best of our knowledge, optical measurement of the...
-
French Line Prediction for Steels Using Experimental Data to Construct a Fatigue Curve. Part 2. Method Verification and Estimation of Calculation Errors
The concept of the endurance limit variation during fatigue of materials was adopted by the author and introduced in Part 1. Unlike the conventional...
-
Application of Modified Fatigue Curve for Evaluation of Fatigue Damage of Steels at Variable Stress Amplitudes. Part 1. Calculation Model and Initial Data at Constant Stress Amplitudes
The possibility of estimating the scattering of total fatigue damage in materials at variable amplitudes of cyclic loading by the scattering...
-
Research on Automatic Deviation Correction Device and Control System for Prevent Conveyor Belt Deviation in the Curve Section
Most of the faults of conveyor are caused by the belt deviation. This paper designed an automatic deviation correction device and control system to...
-
Application of Modified Fatigue Curve for Evaluation of Fatigue Damage of Steels at Variable Stress Amplitudes. Part 2. Fatigue Damage Summarization Under Two-Stage Symmetric Cyclic Loading
The linear model for calculating durability at variable stress amplitudes and the input data for such calculation presented in Part 1 were used to...
-
Significant effect of ordered micro-domain on cell boundary phase distribution and demagnetization curve squareness of Sm2Co17-type magnet
Cu-rich cell boundary phase is difficult to precipitate evenly, resulting in a generally poor demagnetization curve squareness for Fe-rich Sm 2 Co 17 -typ...
-
Modeling the Double-Pass Flow Curve of Nb Micro-Alloyed Steel by Machine Learning and its Extrapolation to Static Softening Kinetics
This paper presents a method to predict the double-pass flow stress behavior of hot-rolled niobium (Nb) micro-alloyed steel by combining the...
-
Progress and future of relative humidity sensors: a review from materials perspective
Measurement of relative humidity demands sensors with different requirements and specifications. There has been a lot of work done on the development...
-
Determining the Hardening Curve and Mechanical Properties of Rolled Strips of Tin-Phosphorus Bronze (BrOF6.5–0.15)
The article presents the results of tensile testing of samples of tin-phosphorus bronze strips of known chemical composition rolled on a 150235 mill....
-
Numerical Simulation of the Upsetting of Bronze Samples with Allowance for Changes in Their Relative Density
Abstract —A technique is proposed to estimate the force of deformation of parts made of bronze-based powders under uniaxial compression conditions....
-
Role of Superparamagnetic Nanoparticles in Humidity Sensing Behavior of Holmium doped Manganese-Bismuth ferrites for Relative Humidity Sensor applications
Rare earth-doped ferrites are exhibiting remarkable surface phenomena. Wherein the process of adsorption is most significant. Humidity sensors are...
-
Comparing Relative Bond Characteristics Between Spherical and Elongated Morphologies for Cold Spray Process Using SPH Simulation
Under cold spray conditions, the modified Johnson–Cook model was adopted to perform single and multiple particle simulation for spherical and...
-
Influence of Relative Humidity on Thermal Properties of Tool Steel Powder
The ever-increasing demands on component properties have been inspiring research in the additive manufacturing sector for years, driving it to gain a...
-
On the Interaction to Thermal Cycle Curve and Numerous Theories of Failure Criteria for Weld-Induced Residual Stresses in AISI304 Steel using Element Birth and Death Technique
In this present study, element birth and death technique is used in simulation to compute thermal history as in transient temperature distribution...
-
Stress–Strain Curve as Extremal of Some Functional
A functional is proposed, the requirement of stationarity of which leads to a differential equation of the second or fourth order with respect to...
-
Exploring the Impact of Machining Forces on Ball End Milling of Ti–6Al–4V Alloy through Single-Curve Simulation
In pursuit of unlocking the full potential of Ti–6Al–4V titanium alloy known for its exceptional strength-to-weight ratio, corrosion resistance, and...
-
-
Influence of Relative Density and Strain Rate on Mechanical Behavior and Energy Absorption of Additively Manufactured Lattice Structure
Bending-dominated lattice structures (LS) are frequently used in lightweight and energy-absorbing applications. The performance of these LS is...
