Search
Search Results
-
Development of Warm and Cold Tube Forming of Ti-6Al-4V Alloy by Press Forming
The low ductility of Ti–6Al–4V alloy at forming temperatures below 780 ℃ is still a problem. Ti–6Al–4V is usually hot press formed at 780 to 900 ℃....
-
Impact of Thermal Cycling on Cu Press-Fit Connector Pin Interconnect Mechanical Stability
Press-fit technology provides an electrical and mechanical connection by inserting a press-fit pin into a through-hole of a printed circuit board...
-
Properties and Structure Control of Hot-Worked Vessels by Varying the Cooling Media at the Outlet of the Rolling-Press Line
AbstractThe discrete control method of the mechanical properties and structure during heat treatment of grade 50 steel vessels with residual heating...
-
Valorization of aluminium slags to produce sustainable ceramic wall tiles
The aim of this study is to recycle aluminum slag as a raw material for ceramic tile production. The non-metallic part of the slags, which are...
-
Stone Deterioration of the Western Wall: Chemical and Mineralogical Characterization of Salts
Buildings and monuments made of carbonate rocks exhibit different rates of erosion. Chemo-mechanical processes are suggested as the main processes,...
-
An Exploration of the Process Operating Window for Folding-Shearing in a Press-Tool
Folding-shearing, is a novel process, which in previous work has been used to create isolated shrink corners. The top surface of a blank was clamped,...
-
Design and Manufacturing of a Lightweight Press-Hardening Forming Tool by Wire Arc Additive Manufacturing
Press-hardening is an important metal sheet manufacturing process to improve the metal sheet properties during forming with an inline quenching...
-
Highly adaptive triboelectric tactile sensor on the foot of autonomous wall-climbing robots for detecting the adhesion state and avoiding the hazard
Due to the excellent maneuverability and obstacle crossing of legged robots, it is possible for an autonomous legged wall-climbing robots to replace...
-
The Effect of Wall Thickness on the Microstructure and Tensile Properties on Squeeze Casting of Al–5Mg–2.2Si–0.6Mn–0.1Ce Alloy
The present study investigates the effect of wall thickness on the mechanical properties of Al-5Mg-2.2Si-0.6Mn-0.1Ce castings, using squeeze casting...
-
Plasmon-enhanced ultra-high photoresponse of single-wall carbon nanotube/copper/silicon near-infrared photodetectors
Single wall carbon nanotube (SWCNT)/Si heterojunction photodetectors have the advantages of high photoresponse ability and simple structure, however,...
-
Tannic acid coated single-wall carbon nanotube membranes for the recovery of Au from trace-level solutions
The efficient recovery of gold from industrial sewage is important for saving precious metals and remains a big challenge. We report the extraction...
-
Examination of a Composite Ring Rolling Process with Different Wall Thicknesses to Produce a Ring of 1.7225 and 1.4462 in FEM and Experiment
The ring rolling process offers the possibility of producing seamless rings. For certain applications, it would be advantageous for cost reasons to...
-
Effect of heat treatment temperature of the glaze lager on the structure and the formaldehyde removal performance of an interior wall tile
With the improvement of people’s living standards, a large number of petroleum products, daily necessities and decorations that can produce volatile...
-
Development of Warm Press Forming Process Method of Ti–6Al–4 V Alloy Sheet
Because of the low ductility of Ti–6Al–4V alloyTi-6Al-4V alloy at the temperatures between room temperature and 600 °C, fracture easily occurs during...
-
New Ways of Obtaining Nanocomposites Based on Multi-Wall Carbon Nanotubes and Aluminum Alloy by High Pressure Casting
This study is performed to find ways for expanding use in industry of nanocomposites based on a light metal matrix and multiwall carbon nanotubes....
-
Development and Theoretical Justification of an Innovative Process for the Production of Seamless Bilayer Bimetallic Tubes 530, 550, 610, 630, 720, and 820 mm in Diameter with Various Combinations of Steels and Wall Thicknesses
AbstractAn innovative technology for the production of seamless bilayer bimetallic pipes 530, 550, 610, 630, 720, and 820 mm in diameter with various...
-
Corrosion Susceptibility of a Mg Alloy ZAME1100 Thin-Wall Extruded Hollow-Beam Profile
The objective of this work is to determine the corrosion susceptibility of Mg alloy ZAEM 1100 extruded beam profiles in NaCl (aq). Cross-section...
-
Enhanced domain wall conductivity in photosensitive ferroelectrics Sn2P2S6 with full-visible-spectrum absorption
Recent optical stimulation suggests a vital non-contact pathway to manipulate both macroscopic and microscopic ferroelectric properties and paves the...
-
Evaluation of Press Forming Technique for Bent Automotive Body Parts Using In-Plane Shear Deformation
A basic evaluation of a new press forming techniquePress forming technique using in-plane shear deformationIn-plane shear deformation was carried out...
-
Analog ferroelectric domain-wall memories and synaptic devices integrated with Si substrates
Brain-inspired neuromorphic computing can overcome the energy and throughput limitations of traditional von Neumann-type computing systems, which...
