Search
Search Results
-
Uniform pore structure silica aerogel powders prepared by pore repair method
Nowadays, the rapid preparation of silica aerogel powders by ambient pressure drying (APD) method has been widely studied. However, the internal pore...
-
Pore-Scale Modelling of Flow Batteries and Their Components
This chapter overviews pore-scale modelling and simulation of the porous electrodes used in VRFBs. The transport phenomena within the electrode are...
-
Investigation on the pore structure and adsorption capacity of silica aerogels prepared with different cations
The structural characteristics of silica aerogels prepared under different concentrations of Na + , Ca 2+ and Al 3+ were thoroughly evaluated by using...
-
Quantifying pore characteristics in polymer glass–ceramics composite scaffolds using micro-tomography
Biomaterials used in bone tissue engineering should mimic the pore characteristics and micro-architectural features of bone to facilitate successful...
-
Pore tracing in additive manufactured and hot isostatic pressed components
Despite past scientific efforts and the increased use of hot isostatic pressing (HIP) in additive manufacturing applications, a complete...
-
Effects of supercritical-CO2 treatment on the pore structure and H2 adsorptivity of single-walled carbon nanohorns
We investigated the effects of supercritical-CO 2 treatment on the pore structure and consequent H 2 adsorption behavior of single-walled carbon...
-
X-Ray Tomographic Study of Pore Volume Fraction in Samples of Polymer Composite Materials. Scanning and Reconstruction of Tomographic Data
AbstractA description of the X-ray tomographic studies of samples made of polymer composite materials for the purpose of quantitative determination...
-
In situ observation of the pore formation during laser-based reactive air brazing of alumina
Reactive air brazing (RAB) is a low-cost process for joining ceramic composites in air. However, due to the comparably low strength values that can...
-
Pore-engineered nanoarchitectonics for cancer therapy
Nanoarchitectonics describes the integration of nanotechnology with other fields as a postnanotechnology concept that elevates it to material...
-
Quantifying Pore Morphology in Spray-Formed Tantalum Using X-ray Micro-computed Tomography
In order to establish quantitative process–structure–property relationships in thermal spray coatings, a robust framework for defining...
-
Structure and mechanical characteristics of titanium fiber material with gradient pore architecture
The paper analyzes the possibility of creating a titanium porous fiber material for implants, which is made of fibers of various transverse sizes and...
-
Effect of nano-silica on mechanical properties and microstructure of high-volume ground granulated blast furnace slag cement paste
Incorporating ground granulated blast furnace slag (GBS) as a supplementary cementitious material in cementitious materials can reduce the cement...
-
Comparison of X-Ray Computed Tomography and Metallography for Determination of Pore Size
The pores that occur during the casting process adversely affect the fatigue characteristics of the Al–Si alloys (silumins). The effect of casting...
-
Optimization of electrolyte volume in lithium-ion pouch-type cells
Continued improvements in Li-ion battery (LIB) technology are needed to increase consumer adoption of electric vehicles. One opportunity to increase...
-
Pore size influence in fabricating DCPD-Coated Porous β-TCP granules: compositional, morphological, and functional group perspective
This study aims to understand the influence of pore size on the compositional, morphological, and functional group characteristics of dicalcium...
-
Partitioning of pore space in hydrogen-bonded organic frameworks for enhanced CO2 photoreduction
Hydrogen-bonded organic frameworks (HOFs) hold significant promise for catalytic applications. However, the collapse of pores upon solvent removal...
-
The impact of effective pore percentage on CH4/N2 separation in coal-based activated carbon
The efficient separation of CH 4 /N 2 using activated carbon depends on the strict regulation of carbon pore structure. However, the relationship...
-
A Methodology for the Rapid Qualification of Additively Manufactured Materials Based on Pore Defect Structures
Additive manufacturing (AM) can create net or near-net-shaped components while simultaneously building the material microstructure, therefore closely...
-
Pore Space Characteristics and Morphology of Highly Porous Sc2O3 Ceramic Materials Synthesized
An energy-efficient synthesis of highly porous ceramic materials based on Sc 2 O 3 was conducted using a combination of compaction and technological...
-
Pore graded borosilicate bioactive glass scaffolds: in vitro dissolution and cytocompatibility
3D borosilicate bioactive glass (1393B20 and B12.5MgSr) scaffolds were prepared by robocasting, with and without a dense layer at the top. Pore...
