Search

Search Results

1. Synthesis of nanocrystalline Co₃O₄ through solution combustion method: effect of fuel to oxidizer ratio on structural and physical properties

   Solution combustion synthesis (SCS) is an energy and time efficient method used for synthesis of metal oxide nanoparticles. Here, nanocrystalline Co ₃ O

   G. Pradeep Kumar, I. N. Jawahar, V. Biju in Journal of Materials Science: Materials in Electronics

   Article 13 May 2021
   

2. Potassium persulfate as an oxidizer in chemical mechanical polishing slurries relevant for copper interconnects with cobalt barrier layers

   Cobalt (Co) has been applied as one of the most promising candidates of barrier metals for copper (Cu) interconnects. The present work describes the...

   Lifei Zhang, Tongqing Wang, **nchun Lu in Journal of Materials Science

   Article 24 April 2020
   

3. Numerical Study on the Combustion Phenomena in the Gas Region of a Top-Blown Converter With Single-Flow Post-Combustion Oxygen Lance

   Post-combustion (PC) technology is a clean heat compensation method by introducing an additional amount of oxygen to further oxidize CO into CO ₂ , and...

   Pengyuan Dong, Shuguo Zheng, Miaoyong Zhu in Metallurgical and Materials Transactions B

   Article 20 February 2024
   

4. Study of a Concept of Energetic Materials Consisting of a Solid Fuel Matrix Containing Liquid Oxidizer

   Composite energetic materials such as solid propellants are characterized by a solid fuel, typically a polymeric binder matrix, containing solid...

   Avishag Deborah Pelosi, Alon Gany in Innovative Energetic Materials: Properties, Combustion Performance and Application

   Chapter 2020
   

5. Numerical Analysis of Multiphase Flow and Post-Combustion Characteristics in a Top-Blown Converter with Various Operating Parameters

   To describe the characteristics of multiphase flow and post-combustion in the converter, two separate 3D models are established in present work. The...

   Shuguo Zheng, Pengyuan Dong, Miaoyong Zhu in Metallurgical and Materials Transactions B

   Article 17 June 2024
   

6. Aerogels and Sol–Gel Composites as Nanostructured Energetic Materials

   In the last 20 years, there have been a significant number of investigations of the application of aerogels and sol–gel-derived materials and methods...

   Alexander E. Gash, Randall L. Simpson, ... Nicholas Leventis in Springer Handbook of Aerogels

   Chapter 2023
   

7. Effect of Potassium Iodate-Based Slurry for Polishing of Ruthenium (Ru) as Advanced Interconnects

   With the reduction of technology nodes to less than 10 nm, ruthenium (Ru) has emerged as a viable replacement for copper (Cu) for...

   Jenasree Hazarika, Anusuya Talukdar, Prasanna Venkatesh Rajaraman in Journal of Electronic Materials

   Article 20 July 2023
   

8. Improving the Efficiency of Refining Copper Scrap Melt Via Steam-Air Oxidation Based on Mathematical Modeling and Experimental Investigations

   Recycled scrap and waste are used in the production of copper and copper alloys. Cable scrap containing impurities of non-ferrous and ferrous metals...

   A. N. Zadiranov, A. V. Meshcheryakov, ... V. O. Eroshenko in Metallurgist

   Article 22 July 2023
   

9. Survey of Low-Burn-Rate Solid Rocket Propellants

   This chapter presents the topic of low-burn-rate composite solid rocket propellants. While the majority of presently developed systems require high...

   Adam Okniński, Paweł Nowakowski, Anna Kasztankiewicz in Innovative Energetic Materials: Properties, Combustion Performance and Application

   Chapter 2020
   

10. Effects of Spraying Parameters on the Velocity of HVOF-Sprayed Particles Based on the PIV Method

    High-velocity oxygen fuel thermal spraying is widely used in industrial production, and coating hardness and density are closely related to the...

    Jianxiao Lu, Shizhen Zhu, ... Lihong Gao in Journal of Thermal Spray Technology

    Article 11 July 2022
    

11. Simultaneous Thermal Analysis of Lithium Aluminate SCS-Precursors Produced with Different Fuels

    Abstract

    Lithium aluminate samples were obtained in reactions of solution combustion synthesis (SCS) with various types of fuel (glycine, leucine, and...

    V. D. Zhuravlev, O. G. Reznitskikh, ... K. V. Nefedova in International Journal of Self-Propagating High-Temperature Synthesis

    Article 05 September 2023
    

12. Substantiation of a Combined Technology for the Hydrometallurgical Beneficiation of a Pyrrhotine-Containing Charge Based on Pressure Oxidation Leaching Using Ferric Sulfate as a Pyrrhotine Oxidizer

    Abstract

    Two series of comparative experiments are carried out to select the most effective version of pressure oxidation technology (POT) for...

    K. A. Solntsev, M. N. Naftal’, ... O. I. Tsybin in Russian Metallurgy (Metally)

    Article 01 September 2020
    

13. Particle packing models to determine time-dependent slip flow properties of highly filled polyurethane-based propellant

    Hydroxyl-terminated polybutadiene (HTPB) is a reliable binder to build a strong polyurethane network for materials with more than 85 wt% of fillers,...

    Afni Restasari, Luthfia Hajar Abdillah, ... Kendra Hartaya in Journal of Rubber Research

    Article 01 May 2022
    

14. Experimental Study on LaFeO3/Nb2O5 Oxygen Carrier in Chemical-Loo** Partial Oxidation of Methane

    Chemical-loo** partial oxidation of methaneChemical-loo** partial oxidation of methane is a green technologyTechnology. The ironIron-based...

    Yue Lai, Songming Zheng, ... Guoquan Zhang in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2024
    

15. Raman Scattering Diagnostics

    This chapter provides a comprehensive overview of the recent advancements in the field of combustion research utilizing Spontaneous Raman Scattering...

    Vestince Balidi Mbayachi, Zhen-Yu Tian, ... Daniel A. Ayejoto in Advanced Diagnostics in Combustion Science

    Chapter 2023
    

16. Zero-dimensional model for the prediction of carbon nanotube (CNT) growth region in heterogeneous methane-flame environment

    The conventional multi-scale modelling approach that predicts carbon nanotube (CNT) growth region in heterogeneous flame environment is...

    Muhammad Thalhah Zainal, Norikhwan Hamzah, ... Mohd Fairus Mohd Yasin in Carbon Letters

    Article 19 July 2023
    

17. Mild purification of multiwalled carbon nanotubes with increased selectivity for carbon impurity and residual metal removal

    In this study, the refinement of Multiwalled Carbon Nanotubes (MWCNTs) derived from chemical vapor decomposition is investigated. An ultrasonic...

    Erdong Chen, Qiang Liu, ... Wei Jiang in Carbon Letters

    Article 28 December 2023
    

18. Programming an efficient technique for designing smart C-doped MIC with dual self-protection for information and high-energy

    Constructing self-protected metastable intermolecular composites (MICs) enables the regulation of microstructures towards boosting controllable...

    **ao-Gang Guo, Tao-Tao Liang, ... Xun Cui in Rare Metals

    Article 11 July 2024
    

19. A Novel Approach to Predict the Cured Mechanical Properties of HTPB-Based Composite Solid Propellant

    R value (~NCO/~OH ratio) is generally used as a guideline to fix up the propellant formulation. Given the batch to batch variation in the raw...

    I. Kingstone Lesley Jabez, Urmila Das, Nakka Sudarshan in Recent Advances in Composites Engineering and Research

    Conference paper 2024
    

20. Oxidation-Enhanced Evaporation in High-Carbon Ferromanganese

    Thermal fume formation is a problem in manganese ferroalloy production and the metal production industry at large. A better understanding of the...

    Håkon Aleksander Hartvedt Olsen Myklebust, Stefan Andersson, Gabriella Tranell in Oxidation of Metals

    Article Open access 20 March 2021