Search

Search Results

1. Improvement of high-frequency magnetic properties of CoFeB thin film using oblique deposition for spin wave electronic devices

   The use of materials with low dam** coefficient and high resonant frequency in spin electronic devices means the fastest and least dissipative...

   Jiaxing Liu, Yan Zhang, ... Min Chen in Journal of Materials Science: Materials in Electronics

   Article 02 February 2024
   

2. Magnetic Anisotropy of Permalloy Films Prepared by Oblique Angle Magnetron Sputtering

   Abstract

   The peculiarities of induced magnetic anisotropy and magnetization reversal processes of single-layer and 10 to 200-nm-thick multilayer Fe ₂₀ Ni...

   A. V. Svalov, I. A. Makarochkin, ... G. V. Kurlyandskaya in Physics of Metals and Metallography

   Article 01 November 2022
   

3. Optimizing High-Transmission Conductive Windows with Antireflection Coating for Oblique Angle Light Incidence

   This study focuses on the fabrication and characterization of a transparent conductive window with high transmission properties. The window is...

   Nicoleta Nedelcu, Dylan Webb, ... Francine Cerbino de Santana in Journal of Electronic Materials

   Article 14 May 2024
   

4. The effect of metal electrodes and deposition angle on linearity of sculptured TiO₂ humidity microsensors

   In this work, the sensitivity and linearity properties of capacitive based titanium dioxide (TiO ₂ ) humidity microsensors with different materials...

   Phenthai Phinmuang, Mongkol Ekpanyapong in Journal of Materials Science: Materials in Electronics

   Article 14 March 2024
   

5. Ion Beam Sputtering Induced Glancing Angle Deposition

   The method of ion beam sputtering under glancing angle conditions in combination with an additional rotation of the sample holder allows the growth...

   Bernd Rauschenbach in Low-Energy Ion Irradiation of Materials

   Chapter 2022
   

6. Optical and electrical anisotropies in Cu₂ZnSnS₄ and Cu₂MgSnS₄ thin films deposited by thermal evaporation at obliquely incident angle

   In this work, CMTS (Cu ₂ MgSnS ₄ ) and CZTS (Cu ₂ ZnSnS ₄ ) thin films have been deposited at room temperature by thermal evaporation at different oblique...

   C. Khebir, G. Bousselmi, ... M. Kanzari in Journal of Materials Science: Materials in Electronics

   Article 23 November 2023
   

7. Influence of Different Laser Irradiation Angle on Ni-Base Alloy Coatings Manufactured by Laser Melting Deposition

   NJ30 alloy reinforced by WC were prepared by laser melting deposition at different laser irradiation angles. The influence of the laser irradiation...

   Tianmeng Jiao, **n Chen, ... Guanghua Liu in Journal of Materials Engineering and Performance

   Article 13 October 2022
   

8. Monolithic fabrication of vertical silicon nanowire gas sensor with a top porous copper electrode using glancing angle deposition

   Vertical Si nanowire (SiNW) gas sensor with a top porous electrode (TPE) has been reported as a highly sensitive, small footprint, and...

   Naseem Abbas, Jun Kim, ... Seok-min Kim in Journal of Materials Science: Materials in Electronics

   Article 27 January 2021
   

9. Morphology tuned plasmonic TiN nanostructures formed by angle-dependent sputtering process for SERS measurements

   Nowadays, most SERS platforms are based on plasmonic metals like silver and gold. The current scientific achievement is to construct SERS...

   Tapan Barman, Libor Nozka, ... Jan Krajczewski in Journal of Materials Science

   Article Open access 23 September 2023
   

10. Effect of substrate-tilting angle-dependent grain growth and columnar growth in ZnO film deposited using radio frequency (RF) magnetron sputtering method

    The present work reports the result of substrate-tilt angle-dependent deposition of Zinc Oxide (ZnO) films using Radio Frequency (RF) magnetron...

    Thita Sonklin, Dhanunjaya Munthala, ... Soodkhet Pojprapai in Journal of Materials Science: Materials in Electronics

    Article 23 June 2022
    

11. Ion Beam Deposition and Cleaning

    Direct deposition of low-energy ionized atoms or molecules (IBD) onto a substrate has key advantages in terms of controlling layer properties. In...

    Bernd Rauschenbach in Low-Energy Ion Irradiation of Materials

    Chapter 2022
    

12. Ion Beam-Assisted Deposition

    In this chapter, the ion beam-assisted deposition (IBAD) method is presented, which is characterized by the deposition of material in high vacuum and...

    Bernd Rauschenbach in Low-Energy Ion Irradiation of Materials

    Chapter 2022
    

13. Optimization of GLAD Angle for E-Beam-Fabricated Tungsten Oxide (WO₃) Thin Films Towards Novel Electrochromic Behavior

    It is hypothesized that increasing the glancing angle deposition (GLAD) will increase the porosity of WO ₃ thin film, thus allowing for better ion...

    Jyothi Gutpa, Habibuddin Shaik, ... Sheik Abdul Sattar in Journal of Electronic Materials

    Article 05 November 2022
    

14. Effect of Free-fall Nozzle Channel Dispersion Angle on TC4 Discontinuous Droplets Pre-breakup in EIGA

    The effect of the inlet gas pressure, supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V (TC4)...

    Hai** Zou, Fenglei Li, ... Zhiyu **ao in Journal of Wuhan University of Technology-Mater. Sci. Ed.

    Article 16 January 2023

15. Selective deposition of a MOF at the spikes of Au nanostars for SERS detection

    In the pursuit of advancing molecular sensing through surface-enhanced Raman spectroscopy (SERS), the combination of plasmonic nanoparticles and...

    Yi Liu, Ka Kit Chui, ... Jianfang Wang in Nano Research

    Article 18 June 2024
    

16. Chevronic TiO2 Thin Film Fabrication Using E-Beam Evaporation for UV Photodetection Applications

    TiO2 thin film (TiO2 TF) was fabricated using the E-beam evaporation technique on the silicon substrate while oblique angle deposition technique was...

    Pinky Khundrakpam, Biraj Shougaijam, Ashish Ranjan in Recent Advances in Materials

    Conference paper 2023
    

17. A review of plasma-assisted deposition methods for amorphous carbon thin and ultrathin films with a focus on the cathodic vacuum arc technique

    Amorphous carbon ( a -C) films have garnered significant attention over the past few decades, principally due to their remarkable thermophysical...

    Anurag Roy, Shengxi Wang, Kyriakos Komvopoulos in Journal of Materials Research

    Article 05 January 2023
    

18. Tailoring the magnetism and spin dynamics in CoFeB thin films by post annealing for spintronics applications

    Soft magnetic CoFeB thin films have received remarkable interests in spintronics due to its appealing magnetic and electronic properties. The...

    Muhammad Arif, **ang Zhang, ... Feng Xu in Journal of Materials Science: Materials in Electronics

    Article 21 February 2023
    

19. Substrate angle-induced fully c-axis orientation of AlN films deposited by off-normal DC sputtering method

    Abstract

    A highly c -axis-oriented aluminum nitride (AlN) thin film with smooth and crack-free surface was fabricated by an off-normal direct current...

    Bo-Wei **e, Fa-Zhu Ding, ... Hong-Wei Gu in Rare Metals

    Article 26 February 2021
    

20. AISI 316L Stainless Steel Tribological Behavior under Sliding and Erosive Conditions: A Comparison between Spark Plasma Sintering, Laser Metal Deposition, and Cold Spraying

    Differently processed AISI 316L SS samples were studied to understand the impact of the fabrication process on their tribological and erosion...

    A. V. Radhamani, Hon Chung Lau, ... S. Ramakrishna in Journal of Materials Engineering and Performance

    Article 02 August 2023