Search
Search Results
-
Enhancement of optoelectronic properties of PbS thin films grown by Jet nebulizer spray pyrolysis technique for photodetector applications: an impact of substrate temperature
Herein, the p–PbS/n–Si photodiodes were fabricated by the cost-effective jet nebulizer spray pyrolysis technique. The PbS thin films were deposited...
-
Cerium-Doped Bi2S3 Thin Films Fabricated by Nebulizer-Assisted Spray Pyrolysis Method for Photodetector Applications
In this study, the performances of highly sensitive Ce-doped Bi 2 S 3 thin film-based photodetectors is discussed. The Bi 2 S 3 :Ce thin films were...
-
Photo-sensing properties of Cd-doped In2S3 thin films fabricated via low-cost nebulizer spray pyrolysis technique
In this study, we report the fabrication of cadmium-doped indium sulfide thin films (In 2 S 3 :Cd) using a low-cost nebulizer-aided spray pyrolysis...
-
Development of a highly sensitive UV sensor using Al, Ga, and In-doped NiO thin films via nebulizer spray pyrolysis method for photodetector applications
Fabrication of highly sensitive p-type-based UV photoconductor with less expense is of utmost importance for next-generation optoelectronic...
-
Comparison studies of Zn-doped CuO thin films deposited by manual and automated nebulizer-spray pyrolysis systems and their application in heterojunction-diode fabrication
This paper reports on the development of an automated nebulizer-spray pyrolysis (NSP) system and comparison studies of zinc-doped copper oxide with...
-
Enhancement of physical properties of nebulizer spray-pyrolyzed PbS thin films for Optoelectronic device application: an effect of Ag do**
Here, using a jet nebulizer spray pyrolysis (JNSP) approach, we have created a highly sensitive P–N junction diode using nanostructured Ag-PbS films...
-
Preparation of high-performance high temperature superconducting Bi-2212 wires by the spray pyrolysis powder
The Bi 2 Sr 2 CaCu 2 O x (Bi-2212) precursor powder has been successfully synthesized using the spray pyrolysis method, and the powder has also been made...
-
Synthesis of spherical SiO2 powders from water glass and colloidal Sol through ultrasonic spray pyrolysis
Silicon dioxide (SiO 2 ) is formed via a combination of silicon and oxygen, which are the most abundant elements on Earth. It possesses excellent heat...
-
Room-temperature ammonia gas sensor based on Ni-doped MoO3 thin film prepared by spray pyrolysis method
This report presents the study on the physical and gas sensing properties of the pure and Ni-doped MoO 3 thin film-based gas sensor. Various...
-
Effect of the thickness on the photocatalytic and the photocurrent properties of ZnO films deposited by spray pyrolysis
In this work, we have investigated the structure, morphology, photoluminescence, photocatalytic and photocurrent properties of ZnO thin films as a...
-
Transparent and conductive F-Doped SnO2 nanostructured thin films by sequential nebulizer spray pyrolysis
AbstractTransparent conductive oxides (TCOs) are a key component in many optoelectronic applications such as solar cells, flat panel displays,...
-
The influence of Zn on MoS2 thin films by jet nebulizer spray coating method for P-N diode application
In this study, undoped and Zn doped MoS 2 films are prepared by jet nebulizer spray coating method. The effect of dopant Zn on structural,...
-
Enhanced room-temperature ammonia vapor-sensing activity of nebulizer spray pyrolysis fabricated SnO2 thin films: an effect of Er do**
AbstractIn this work, we have coated 0, 1, 3, and 5 wt% of Erbium (Er)-doped tin oxide (SnO 2 ) films on glass using a simple nebulizer spray...
-
Impact of carrier gas pressures in the formation of (103) oriented In2S3 nanocrystalline thin films by Nebulized Spray Pyrolysis method
Indium sulphide (In 2 S 3 ) thin films were successfully deposited on glass substrates with different carrier gas pressures from 0.6 to 1.2 kg/cm 2 at an...
-
Impact of yttrium on structural, optical and electrical behavior of CuO thin film prepared by JN spray pyrolysis technique for diode application
The thin films of CuO with yttrium as a dopant at 1, 3, and 5wt% are prepared using a simple and economic JNS spray pyrolysis technique at the...
-
Effects of synthesis temperature and polymer addition on the phase and morphology of molybdenum oxide by ultrasonic spray pyrolysis
The powder synthesis conditions were controlled to prepare several phases of molybdenum (Mo) oxide having various morphologies in the ultrasonic...
-
Influence of carrier gas pressure on the characteristics of nebulizer-sprayed Cu2ZnSnS4 absorber thin films
The current work reports the synthesis of the Earth-abundant Copper Zinc Tin Sulfide (CZTS) absorber thin films at low temperature through modified...
-
DSSCs: a facile and low-cost MgSnO3-based transparent conductive oxides via nebulized spray pyrolysis technique
The primary focus of this investigation was constructing worthwhile and cost-effective TCO substrate to make low-cost dye-sensitized solar cells...
-
Superconducting and Normal State Properties of Spray-Pyrolyzed YBCO Thin Films
YBa 2 Cu 3 O 7-δ (YBCO) thin films were prepared in situ on LaAlO 3 (100) single crystal substrates by spray pyrolysis. The deposition temperature was...
-
Transparent MIS capacitors on plastic substrates fabricated by high-frequency ultrasonic spray pyrolysis
In this article, the fabrication and characterization of transparent metal-insulator-semiconductor (MIS) capacitors on plastic substrates are...