Search
Search Results
-
Hot Working Property Study of 7055 Aluminum Alloy Based on Hot Shear-Compression Deformation
To fill the gap in the study of hot working properties of materials under complex stress and strain states, novel shear compression specimens were...
-
Anisotropy in the compression strength of hot-pressed ceramics
It is well documented that the hot-pressing procedures used for many strategic ceramics may introduce microstructural texturing that can lead to...
-
Anomalous hot deformation behavior and microstructure evolution of as-cast martensitic NiTi alloy during hot compression
The martensite phase with low crystal symmetry in NiTi alloy consists of internal twins and nano-layered compounds. The martensite phase has various...
-
Hot compression deformation characteristics of TiBw/Ti65 composites for high-temperature application
Ti–5.9Al–4.0Sn–3.5Zr–0.5Mo–0.3Nb–1.0Ta–0.4Si–0.8W–0.05C (Ti65) alloy is a high-temperature titanium alloy designed for service at 650 °C. To further...
-
Hot Compression Behavior and Processing Map of Homogenized Al-Mg-Si Alloy
The as-cast Al-Mg-Si alloy underwent homogenization treatment before conducting hot compression experiments. The flow behavior of the alloy under...
-
Hot Compression Behavior of Mg–Gd–Y–Zn–Zr Alloy Containing LPSO with Different Morphologies
In this study, hot compression behavior of as-homogenized Mg-9Gd-4Y-2Zn-0.5Zr alloys containing long period ordered (LPSO) phases with different...
-
Effects of Friction and Deformation Heating on Additively Manufactured M789 Steel During Hot Compression Tests
Predicting accurate high-temperatureHigh temperature mechanical propertiesMechanical properties of materialsMaterials is crucial, specifically for...
-
Hot Compression Behavior and Microstructure Evolution of an Mg–Gd–Y–Zn–Zr Alloy Containing the 14H LPSO Phase with Different Morphologies
In this paper, the microstructures with two different morphologies of intragranular lamellar 14H long-period stacking-ordered (LPSO) phase were...
-
Ce Effects on Dynamic Recrystallization of Cu-Fe-Ti-Mg Alloys Due to Hot Compression
This study researched how Ce addition affects the microstructure and mechanical behavior of Cu-Fe-Ti-Mg alloys during hot compression. A thermal...
-
Hot Compression Behavior and Tensile Property of a Novel Ni–Co-Based Superalloy Prepared by Electron Beam Smelting Layered Solidification Technology
The hot compression behavior and tensile strength after compression of a new Ni–Co-based superalloy produced using electron beam smelting layered...
-
Processing Maps and Hot Compression Behaviors of ZK60 Alloy After Adding Different Rare Earth Elements
In this study, the effect of adding 3 wt.% of light (Ce) and heavy (Y) rare earth elements on the microstructure and hot compression behavior of Mg-6...
-
Effect of Grain Size and Compression Direction on the Hot Deformation Characteristics of High-Cr Ultra-Super-Critical Rotor Steel with Columnar Grains
The columnar grains with a duplex grain size distribution in the ingot increase the difficulty of the hot forging of the as-cast high Cr...
-
Hot Compression Mechanical Behavior of Solution Heat-Treated and Pre-aged Mg–Zn–Gd–Er Alloys
The mechanical behavior of solution heat-treated and pre-aged Mg–6Zn–1Gd–1Er alloys during hot compression (from 180 to 330 °C) has been...
-
Phase Transformation and Recrystallization of As-Cast and Homogenized Mg-9Gd-4Y-2Zn-0.5Zr Alloys during Hot Compression
In this paper, the microstructure evolution of as-cast and homogenized Mg-9Gd-4Y-2Zn-0.5Zr alloys during hot compression was studied by electron...
-
Modelling of Mechanical Response and Microstructure Evolution of EA4T Steel during Hot Compression Using the Improved Crystal Plasticity Finite Element Method
In order to study the plastic deformation behavior of EA4T steel at high temperature, an improved Asaro hardening modulus was proposed and introduced...
-
Interfacial Oxides Evolution of High-Speed Steel Joints by Hot-Compression Bonding
The interfacial oxidation behavior of Cr4Mo4V high-speed steel (HSS) joints undergoing hot-compression bonding was investigated by using optical...
-
Effect of Mn Contents on Microstructure Evolution and Recrystallization Behavior of 18.5 Pct Cr Low-Nickel Type Duplex Stainless Steel During Multi-pass Hot Compression
This study examined the effect of manganese (Mn) contents (3.12 to 8.97 pct) and three-pass deformation distributions on dynamic recrystallization...
-
Hot compression deformation and microstructure evolution of high chromium cast iron based on canning compression
In this work, a canning compression process was developed to perform hot compression deformation of high chromium cast iron (HCCI) on a Gleeble 3800...
-
Effects of Hot-Water Aging on the Compression Properties of E-Glass/Epoxy Composites at Varying Strain Rates
The effects of hot-water aging on the quasi-static and dynamic compression properties of unidirectional E-glass/epoxy laminates were investigated....
-
Hot Compressive Deformation Characteristics of Al-9.3Zn-2.4Mg-1.1Cu Alloy
To understand the hot compression deformation characteristics of the self-developed Al-9.3Zn-2.4Mg-1.1Cu alloy, the hot compression tests of...