Search

Search Results

1. Determination of Damage Extent of Backup Roll By Changes in Coercive Force and Hardness of Its Working Surface

   Abstract

   This article presents data on monitoring of the state of working surface of backup roll of rolling mill. In the course of periodic...

   I. N. Sil’verstov, I. I. Karpukhin, A. V. Kornilova in Steel in Translation

   Article 01 November 2022
   

2. Non-destructive Evaluation of Tube-to-Tube Sheet Roller Expanded Joint Quality Using Magnetic Coercive Force Measurements

   A novel technique for evaluating roller expansion joint quality of ASTM A192 carbon steel tubes to SA 299 Gr.A tube sheet by correlation with its...

   R. Yoganathan, N. Siva Shanmugam, Anand Ramanathan in Journal of Materials Engineering and Performance

   Article 05 June 2023
   

3. Electric Isotropic Steel with Rated Magnetic Permeability, Coercive Force, High Magnetic and Mechanical Properties, and Improved Flatness

   Abstract

   During the development of a technology for the production of medium-alloyed, cold-rolled electric isotropic steel with a silicon content of...

   S. S. Degtev, D. V. Barybin, ... V. S. Yusupov in Steel in Translation

   Article 01 April 2023
   

4. Magnetic Force Microscopy of the Domain Structure of High-Coercivity (Nd–R)–Fe–B (R = Pr, Ce, Dy, Tb, Ho) Permanent Magnets

   Abstract

   In the present study, the domain structure of high-coercivity and high-performance Nd–Fe–B-based permanent magnets, which were prepared by...

   N. A. Dormidontov, N. B. Kolchugina, ... A. S. Andreenko in Russian Metallurgy (Metally)

   Article 01 September 2023
   

5. Applying High-Pressure Torsion to Deformation of a Recrystallized τ-MnAl Alloy: Results and Problems

   In this study, the effect of high-pressure torsion (HPT) on the structure, phase composition and magnetic properties of ferromagnetic MnAl-C alloy...

   A. S. Fortuna, M. V. Gorshenkov, ... A. I. Laptev in Journal of Materials Engineering and Performance

   Article 22 May 2023
   

6. On the Advantages of Local Measurement of Coercive Force of Ferromagnetic Objects Based on Internal Field

   V. N. Kostin, O. N. Vasilenko, ... D. G. Ksenofontov in Russian Journal of Nondestructive Testing

   Article 01 July 2020
   

7. Tailoring coercive field in rare earth giant magnetostrictive materials by α-Fe precipitation

   Abstract

   Rare earth giant magnetostrictive materials (GMMs) Tb _{1− x} Dy _x Fe _{2± δ} (Tb–Dy–Fe) have been successfully employed in many microelectromechanical...

   Fang-**an Zhang, Peng-Qiang Hu, ... Dun-Hui Wang in Rare Metals

   Article 07 November 2022
   

8. Change of Microstructure and Properties of WC–Co Cemented Carbides as a Result of High Pressure and Temperature

   The change in the structure and physicomechanical properties of sintered binding WC–6Co, and WC–15Co cemented carbides because of the action of high...

   I. O. Hnatenko, I. V. Andreiev, ... T. O. Kosenchuk in Materials Science

   Article 01 March 2024
   

9. Probing local magnetic states in the van der Waals ferromagnet Fe₄GeTe₂ by a vector-field magnetic force microscope

   In this study, we systematically investigate the magnetic domain structure of Fe ₄ GeTe ₂ single crystals, employing a cryogenic vector-field magnetic...

   **young Yun, Yeonkyu Lee, ... Jeehoon Kim in Journal of Materials Science

   Article 01 April 2024
   

10. A Modified Kondorsky Model for Describing the Magnetization Reversal Processes in Nd–Fe–B Permanent Magnets

    Abstract

    A modified Kondorsky model of the magnetization reversal processes based on the mechanism of domain-wall movement delay is described, which...

    A. N. Urzhumtsev, V. E. Mal’tseva, ... A. S. Volegov in Physics of Metals and Metallography

    Article 01 November 2022
    

11. Effect of Magnetic Field Annealing on the Magnetic Properties of Soft-Magnetic Iron–Germanium Alloys

    Abstract —A concentration dependence of the magnetic properties of iron–germanium alloys is studied before and after their thermomagnetic treatment,...

    V. A. Lukshina, A. V. Timofeeva, ... N. V. Ershov in Physics of Metals and Metallography

    Article 01 December 2023
    

12. Synthesis, Structure, and Magnetic Properties of 2Ni–Al–Mn-Based Alloy

    Abstract

    For the first time, an intermetallic 2Ni–Mn–Al-based alloy is prepared by self-propagating high-temperature synthesis (SHS) combined with...

    M. L. Busurina, O. D. Boyarchenko, ... A. E. Sychev in Russian Metallurgy (Metally)

    Article 01 November 2023
    

13. Effect of annealing in unsaturated magnetic field on the magnetic properties of an amorphous alloy Fe₇₇Ni₁Si₉B₁₃

    The regularities of the influence on the magnetic properties of temperature and the strength of the longitudinal magnetic field, which is much less...

    Ekaterina N. Tokmakova, Vadim Yu. Vvedenskiy in Journal of Materials Science: Materials in Electronics

    Article 11 July 2023
    

14. Magnetic Properties of a Nickel–Zinc Ferrite Powder with Different Degrees of Dispersion

    Abstract

    The influence of the degree of dispersion of a nickel–zinc ferrite powder of a Ni _0.7 Zn _0.3 Fe ₂ O ₄ composition on its magnetic properties has...

    S. Bobuyok, A. P. Surzhikov, ... V. D. Salnikov in Physics of Metals and Metallography

    Article 01 April 2024
    

15. Effect of Microstructural Features on Magnetic Properties of High-Carbon Steel

    Industrially produced high-carbon steel has been heat treated in order to obtain various microstructures of the single phase of martensite, bainite,...

    Zeinab Babasafari, Alexey V. Pan, ... Rian Dippenaar in Metallurgical and Materials Transactions A

    Article 26 September 2021
    

16. Enhancement of the Coercive Force of Sm₂Fe₁₇N₃ Powders via Surfactant Added Mechanical Milling

    Abstract

    The effect of the mechanical milling of Sm ₂ Fe ₁₇ N ₃ nitride in a vibratory mill, in particular, the effect of the powder-to-ball mass ratio ( m )...

    D. A. Kolodkin, A. G. Popov, V. S. Gaviko in Physics of Metals and Metallography

    Article 01 June 2021
    

17. Optimization of the Heat Treatment of a Hard Magnetic Fe–30Cr–16Co–1Sm Powder Alloy

    Abstract

    The optimization of heat treatment of an anisotropic hard magnetic Fe–30Cr–16Co–1Sm powder alloy is performed by experimental design using...

    I. M. Milyaev, A. I. Milyaev, ... E. V. Shuster in Russian Metallurgy (Metally)

    Article 01 December 2023
    

18. Magnetic Properties and Structure of the Fe_63.5Mn₁₀Cu₁Nb₃Si_13.5B₉ Alloy Nanocrystallized in the Presence of Tensile Stresses

    Abstract

    The effect of 10 at % Mn introduced into the classic FINEMET (Fe _73.5 Cu ₁ Nb ₃ Si _13.5 B ₉ ) at the expense of Fe on the magnetic properties,...

    V. A. Lukshina, N. V. Dmitrieva, ... D. A. Shishkin in Physics of Metals and Metallography

    Article 01 September 2023
    

19. Magnetocaloric Effect of RCo₅ (with R = Gd, Tb, Dy, and Ho) Alloys

    Abstract

    The magnetic and magnetocaloric properties of the RCo ₅ polycrystalline alloys (with R = Gd, Tb, Dy, and Ho) are studied experimentally in...

    M. V. Utarbekova, M. A. Orshulevich, ... S. V. Taskaev in Physics of Metals and Metallography

    Article 01 November 2023
    

20. Acoustic and Electromagnetic Properties of Maraging Iron–Chromium–Nickel Alloy with Addition of Copper in Mechanical Tension

    Abstract

    The results of studying the acoustic and electromagnetic properties of KhM-12 (15-5 PH, also known as also known as UNS S15500) maraging...

    V. V. Murav’ev, O. V. Murav’eva, A. L. Vladykin in Russian Journal of Nondestructive Testing

    Article 01 May 2023