Search

Search Results

1. Non-Heat-Treated Steel for Manufacturing Automotive Part

   The non-heat-treated steel for a cold forging does not require post-heat-treatment to meet mechanical requirements of product. This steel is very...

   Youngyun Woo, Yeongseon Lee, ... Changgon Jeong in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

2. Electrorheological behavior of heat-treated sepiolite suspension

   In this study, we investigated the electrorheological characteristics of a fibrous hydrated magnesium silicate, sepiolite suspension. The sepiolite...

   So Yeon Ahn, Chengbin Yu, Young Seok Song in Korea-Australia Rheology Journal

   Article 02 October 2023
   

3. Hydrogen Embrittlement Resistance of High Strength 9260 Bar Steel Heat Treated by Quenching and Partitioning

   Hydrogen embrittlement (HE) continues to be a limiting factor in implementing high strength steel alloys in applications such as fasteners. In this...

   E. Hoyt, M. Rupinen, ... K. O. Findley in Journal of Materials Engineering and Performance

   Article 27 February 2024
   

4. Influence of Heat Treatment Condition on Tensile Properties of AM350 Stainless Steel

   AM350 is a candidate material for welded disc bellows in nuclear applications. The assessment of tensile deformation behavior of AM350 stainless...

   S. C. S. P. Kumar Krovvidi, C. R. Das, ... S. Raghupathy in Transactions of the Indian Institute of Metals

   Article 24 August 2022
   

5. The mechanical and thermal properties of wood plastic composites based on heat-treated composite granules and HDPE

   To improve the mechanical and thermal properties of wood plastic composites for building and structural applications, pretreatment was applied to the...

   Lucky Ogheneakpobo Ejeta in Journal of Materials Science

   Article 11 December 2023
   

6. Investigation of Resistance of Intergranular Attack for Various Heat Treated 2011 Alloys After Hard Anodizing

   The main alloying element of 2011 aluminum alloy2011 aluminum alloy is copperCopper and it is disadvantageous from the point of corrosionCorrosion...

   Ilyas Artunc Sari, Gorkem Ozcelik, ... Onuralp Yucel in Light Metals 2023

   Conference paper 2023
   

7. Heat-Treated Inconel 625 by Laser Powder Bed Fusion: Microstructure, Tensile Properties, and Residual Stress Evolution

   This work investigates the impact of different heat treatments on the evolution of the microstructure, tensile properties, and residual stresses of...

   Giulio Marchese, Gabriele Piscopo, ... Sara Biamino in Journal of Materials Engineering and Performance

   Article Open access 12 February 2024
   

8. Correlation of Alpha Phase and Its Texture Stability in Heat-Treated Ti-6.5%Al-4.4%V-0.15%Fe Alloy

   In the present work, microstructure, texture, and mechanical properties were investigated for the heat-treated two-phase ( α  +  β ) titanium alloy...

   Aman Gupta, Gyan Shankar, ... Rajesh Kisni Khatirkar in Journal of Materials Engineering and Performance

   Article 19 January 2023
   

9. Tribological Performance of PH 13-8Mo Maraging Stainless Steel Fabricated via Wire Arc Additive Manufacturing in As-Printed and Heat-Treated Conditions

   Wire arc additive manufacturing (WAAM) is a metal additive manufacturing technology with high material deposition rate. In this study, tribological...

   Elham Afshari, Mahya Ghaffari, ... Ali Nasiri in Proceedings of the 61st Conference of Metallurgists, COM 2022

   Conference paper 2023
   

10. Hydrothermal and heat-treated synthesis of SnS nanostructures for VOCs sensing

    Two-dimensional chalcogenides have made significant advances as chemiresistive gas sensors due to their high sensing response and low power...

    Ziheng Li, Mingxue Zhang, ... Shuang Yan in Journal of Materials Science: Materials in Electronics

    Article 07 April 2024
    

11. Analysis of the Anti-corrosion Performance of Dodecyl Benzene Sulfonic Acid Sodium Salt on Various Heat-Treated Dual-Phase EN8 Steel in an Acidic Environment

    This work focuses on the investigation of the corrosion inhibition of heat-treated EN8 steel in the presence of sodium salt of dodecyl benzene...

    Deepa Prabhu, Jilna Jomy, P. R. Prabhu in Journal of Materials Engineering and Performance

    Article Open access 23 August 2023
    

12. Microstructure and Mechanical Properties of Heat-Treated High-Nitrogen Martensitic Stainless Steel

    The high-nitrogen martensitic stainless steel (HNMS) was subjected to three different austenitizing cycles of 1050, 1075, and 1100 °C followed by...

    Harish Singh Dhami, Nellori Dileep Kumar, ... P. Chakravarthy in Metallography, Microstructure, and Analysis

    Article 14 February 2024
    

13. Mechanical Properties, Thermal Properties and Microstructure of Heat-Treated Al-Zn-Mg-x%Cu (0.02 wt% Cu and 0.89 wt% Cu) Alloy

    The effect of copper addition, solution heat treatment and aging on Al-Zn-Mg alloy's microstructure, mechanical and thermal properties is studied...

    Nikunj Patel, Ajaya Kumar Pradhan in International Journal of Metalcasting

    Article 04 January 2024
    

14. Heat treated graphene thin films for reduced void content of interlaminar enhanced CF/PEEK composites

    Graphene enhanced thermoplastic composites offer the possibility of conductive aerospace structures suitable for applications from electrostatic...

    Christopher Leow, Peter B. Kreider, ... Paul Compston in Functional Composite Materials

    Article Open access 06 June 2023
    

15. Structure and Phase Composition of Heat Treated Al – Zr Bimetal

    Special features of structural and phase transformations occurring in annealing of an explosion-welded Al – Zr bimetal are considered. It is shown...

    Yu. Yu. Emurlaeva, M. N. Khomyakov, ... I. A. Bataev in Metal Science and Heat Treatment

    Article 01 November 2023
    

16. Preparation and properties of heat-treated esterified wood flour/polylactic acid composites for FDM 3D printing

    Polylactic acid (PLA) and wood composites as biodegradable materials have limited applications due to the poor dispersity of wood flour (WF) in PLA...

    Feng Chen, **aohui Ni, ... Xun Gao in Journal of Materials Science

    Article 01 August 2022
    

17. Microstructure and mechanical property formation of heat treated low-carbon chromium-nickel-molybdenum steels

    Low-carbon Cr-Ni-Mo steels widely used in mechanical engineering are studied: 18Kh2N4MA, 25Kh2N4MA, 25KhN3MA. Thermokinetic diagrams are plotted by...

    M. V. Maisuradze, A. A. Kuklina, ... E. V. Antakov in Metallurgist

    Article 08 July 2024
    

18. Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of P91 Heat-Resistant Steel Coating on Mild Steel

    P91heat-resistant steel was deposited on mild steel using cold metal transfer (CMT) arc cladding to enhance oxidation resistance and extend service...

    Rui Wang, Longlong Zhu, ... Lei Hu in Journal of Materials Engineering and Performance

    Article 10 April 2024
    

19. Assessment the Surface Characteristics of Heat-Treated AISI 1040 Steel Using Magnetic Nondestructive Techniques

    Abstract

    In the manufacturing industries, heat treatment is extremely important process to achieve desirable thermo-mechanical properties of...

    Shiv Sunder Singh, Akash Subhash Awale, Binayaka Nahak in Russian Journal of Nondestructive Testing

    Article 01 May 2022
    

20. Hot Compression Mechanical Behavior of Solution Heat-Treated and Pre-aged Mg–Zn–Gd–Er Alloys

    The mechanical behavior of solution heat-treated and pre-aged Mg–6Zn–1Gd–1Er alloys during hot compression (from 180 to 330 °C) has been...

    Bo Che, Liwei Lu, ... Yongfeng Qiu in Acta Metallurgica Sinica (English Letters)

    Article 26 October 2022