Search Page | SpringerLink

Impact Characteristics of Submerged Gas Injection

Intensifying oxygen supply is an important part of the smelting method used in modern EAF steelmaking. This reduces the overall power consumption by...

Guangsheng Wei, Rong Zhu in Electric Arc Furnace Steelmaking with Submerged Mixed Injection

Chapter 2024

Effect of Laser Power on Processing Quality of AZ31B Magnesium Alloy

The laser cutting experiment of AZ31B magnesium alloy was carried out by using a high-power laser cutting machine. The influence of laser power on...

Zhe Wu, Si Jia Wang, ... Rui Zhi Wu in Journal of Materials Engineering and Performance

Article 24 February 2023

A Drainpipe Leakage Caused by Under-Deposit Corrosion in a Gas–Steam Turbine Combined Cycle Power Plant

A drainpipe of a gas–steam turbine combined cycle power plant leaked after served for only 64 months. The chemical compositions, metallographic...

Anwen Zhang, Zhibo Zhang, ... Kun Niu in Journal of Failure Analysis and Prevention

Article 08 April 2021

Thermal cycling behavior of bi-layer Yb₂Si₂O₇/SiC EBC-coated C_f/SiC composites in burner rig tests

To improve the oxidation resistance of carbon fiber reinforced SiC ceramic matrix composites (C _f/SiC) at high-temperature and high-speed gas scour...

Sian Chen, Pengju Chen, ... Yang Li in Advanced Composites and Hybrid Materials

Article 21 May 2021

Numerical Simulation of Particle Motion and Wall Scouring Behavior in Steelmaking Converter With Bottom Powder Injection

The coupled Eulerian-multifluid VOF-granular flow model was built to simulate gas–liquid-particle three-phase flow in a 120-ton steelmaking converter...

**gshi Zhang, Wentao Lou, Miaoyong Zhu in Metallurgical and Materials Transactions B

Article 22 August 2023

Effect of Free-fall Nozzle Channel Dispersion Angle on TC4 Discontinuous Droplets Pre-breakup in EIGA

The effect of the inlet gas pressure, supplementary gas pressure and nozzle channel dispersion angle on the pre-breakup behavior of Ti-6Al-4V (TC4)...

Hai** Zou, Fenglei Li, ... Zhiyu **ao in Journal of Wuhan University of Technology-Mater. Sci. Ed.

Article 16 January 2023

Corrosion behavior and failure mechanism of SiC whisker and c-AlPO₄ particle-modified novel tri-layer Yb₂Si₂O₇/mullite/SiC coating in burner rig tests

The corrosion behavior of environmental barrier coatings (EBCs) directly affects the service life and stability of ceramic matrix composite (CMC)...

Pengju Chen, Peng **ao, ... Yang Li in Journal of Advanced Ceramics

Article Open access 29 November 2022

Oxidation and Thermal Cycle Behavior of Yb2Si2O7-c-AlPO4-SiCw-Mullite Multilayer Coatings

The mullite ceramic coating has excellent oxidation resistance in static environments, but it is easy to generate micro-cracks during the thermal...

Pengju Chen, Peng **ao, Yang Li in Ceramic Coatings for High-Temperature Environments

Chapter 2024

Erosion Wear of KQ52 Alloy Steel Multi-function Four-Way Valve Emergent Discharge Behaviors

KQ52 alloy steel is preferred for the wellhead christmas tree four-way valve because of its excellent resistance to hydrogen sulfide corrosion....

Jia Zhang, Zhanghua Lian, ... **aoli Yang in Transactions of the Indian Institute of Metals

Article 30 September 2021

Water Consumption and Microfibers: The Biggest Threat

The textile industry is one of the top industries that use enormous amounts of water. Water is used extensively throughout textile wet processing...

Oinam Roselyn Devi, Laimayum Jogeeta Devi in Climate Action Through Eco-Friendly Textiles

Chapter 2024

Erosion Resistance Improvement of Polymer Matrix Composites by Detonation-Sprayed Multilayered Coatings

Compared with their metal counterparts, the insufficient erosion resistance of polymer matrix composites (PMC) is a key issue for application in...

Yong**g Cui, Changliang Wang, Zhihui Tang in Journal of Thermal Spray Technology

Article 17 November 2020

Membrane Bioreactor: A Potential Stratagem for Wastewater Treatment

Scarcity of fresh water is looming in the coming few decades and a large source of alternatives are required soon. One of the most recent...

Anamika Paul, Disha Dasgupta, ... Nilanjan Chakraborty in Membranes for Water Treatment and Remediation

Chapter 2023

Events

in Journal of Failure Analysis and Prevention

Article 24 July 2020

What is “Materials Chemistry”?

Since ancient times, societies have manipulated materials in their surroundings to fabricate items that address a societal need and/or desire. This...

Bradley D. Fahlman in Materials Chemistry

Chapter 2023

Effect of laser energy excitation position on the microstructure in laser-arc hybrid heat source processing

Laser-arc hybrid heat sources have been successfully applied in welding and additive manufacturing. This work proposes using pulsed laser energy to...

Yuhua Cai, Yi Luo, ... Shuqing Yang in Welding in the World

Article 01 February 2022

Influence of Metal Transfer Modes on Pore Formation during the Welding Process of AA6082/A360 Dissimilar Aluminum Alloys

In the present study, the dissimilar welded joints of AA6082/A360 aluminum alloy were prepared by cold metal transfer (CMT) mode, cold metal transfer...

Hanlin **ang, Congchang Xu, ... Luoxing Li in Journal of Materials Engineering and Performance

Article 09 January 2023

A Mining Tailings Storage Facility Failure Analysis Model using Bow-tie Representation

In mining operations, the failure of a tailings storage facility (TSF) can result in a dangerous debris flow with high potential energy, leading to...

Congcong Chen, Bo Ma, Zhongxue Li in Journal of Failure Analysis and Prevention

Article 18 March 2022