Search
Search Results
-
The influence of fine powder content on the properties of FeNi50 soft magnetic composites
The development of novel soft magnetic composites (SMCs) is driven by the demand for lightweight and highly stable electronic components. In this...
-
Synergistic effect of gradient Zn content and multiscale particles on the mechanical properties of Al–Zn–Mg–Cu alloys with coupling distribution of coarse–fine grains
This study investigated the influence of graded Zn content on the evolution of precipitated and iron-rich phases and grain structure of the alloys,...
-
Undissolved gold in fine-pitch BGA solder joint under thermal cycling test
Crack propagation has been observed on the bulk solder area of the reworked fine-pitch ball grid array component with the solder joint type SAC305...
-
Concrete Using Crushed Rubber as a Substitute for Fine Aggregate
Seeking to contribute to reduce the impact of improper disposal of tires on the environmentEnvironment, this article proposes the use of tire rubber... -
Ultra-High Hardness TiC-W-Ni Cermets Prepared by Spark Plasma Sintering of Ultra-Fine TiC Powder
High-performance TiC-W-Ni cermets were fabricated employing Ni powder, self-synthesized ultra-fine TiC and W powders through spark plasma sintering....
-
Single and Combined Effect of Fine and Coarse Tire Rubbers on the Static, Microstructural, and Impact Properties of Concrete
This paper presents an experimental investigation on the static, microstructural and impact properties of concrete incorporating tire rubbers. Fine...
-
Effect mechanism of aluminum occurrence and content on the induration characteristics of iron ore pellets
With the intensified depletion of high-grade iron ores, the increased aluminum content in iron ore concentrates has become unavoidable, which is...
-
Galling-Free Fine Blanking of Titanium Gears Using Carbon-Supersaturated YXR7 Punch
A titanium gear with the industrial grade I was fabricated by fine blanking the titanium plate in cold. The carbon supersaturated (CS-) high-speed... -
Latest advances and progress in the microbubble flotation of fine minerals: Microbubble preparation, equipment, and applications
In the past few decades, microbubble flotation has been widely studied in the separation and beneficiation of fine minerals. Compared with...
-
Patterns of Synthesis of TiC–NiCr Cermets from Powder Mixtures: Influence of Nichrome Content and Titanium Particles Size
AbstractThe combustion patterns of powder mixtures (100 – X )(Ti + C) + X NiCr, X = 0–20%, and phase composition of synthesis products were studied....
-
Physical and Process Properties of Fine Gas-Atomized R6M5K5 Powders Produced in Different Conditions
Fine gas-atomized powders of R6M5K5 tool steel were studied. The spherical powders were produced with two distinct melting procedures, each involving...
-
Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D-Printed Earthen Structures
As a raw material for additive construction, earth offers a multitude of benefits, from environmental and economic to social points of view. However,... -
Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts
Abstract: This study focuses on the influences of the fine particle fraction and the minimum particle size on the density, the shrinkage, the Young's...
-
Preparation of coal gasification fine slag-based supercapacitive carbon using hydrothermal deashing and alkali activation
The coal gasification is the key process of clean usage of coal resource, which inevitably produces a large amount of coal gasification slag (CGS),...
-
Mechanical Properties of Fine-Grained Low Alloy Steel Investigated by Crystal Plasticity Finite Element Method
Fine-grained low-alloy steels are prepared via hot rolling, warm rolling, and subsequent annealing in the intercritical zone, resulting in a...
-
Effects of Microwave Hybrid Sintering Methods and Nano-HfC Content on Mechanical Properties and Microstructure of TiB2-Based Cermets
A TiB 2 -based cermet tool material with excellent mechanical performance was rapidly prepared by microwave hybrid sintering. Microwave hybrid...
-
The Effect of Si Content on the Microstructure and Mechanical Properties of Al–1.2Mg–xSi–1.2Cu–0.6Mn Cast Alloy
In this paper, the effect of Si content on the microstructure and mechanical properties of the Al–1.2Mg– x Si–1.2Cu–0.6Mn cast alloy was investigated....
-
In-Situ Electron Backscatter Diffraction Study of Deformation Behavior of Fine-grained Dual Phase Steel Subjected to Uniaxial Tension
In this work, the deformation behavior of fine grained dual phase steel with intragranular martensite distribution as thin boundaries is studied via...
-
Thermal Stability of Laser-Clad Tool Steel with Fine Tungsten Carbide Particle Addition
Thermal stability of laser-modified surfaces is crucial for hot working conditions. Refined grain structure from the rapid solidification can only...
-
Structure and Properties of High-Strength Low-Alloy Martensitic Steels with an Overequilibrium Nitrogen Content
Abstract —The structure and mechanical properties of rods of low-alloy martensitic steels with an overequilibrium nitrogen content, which are melted...