Search
Search Results
-
Experimental and Numerical Study on the Impact of Sand-Carrying Liquid Erosion on Coiled Tubing Wall
Coiled tubing endures significant pressure and fluid impact throughout the oil and gas production and transportation processes. The abrasive action...
-
Case Study on Fireside Erosion of Platen Superheater Boiler Tubes of a Coal-Fired Power Plant
The platen superheater boiler tubes of a 660 MW coal-fired power plant have failed after long term in service. The failed boiler tubes are made of...
-
Erosion of a Titanium Plate Heat Exchanger Due to Hydrogenation
The paper presents an analysis of tests carried out on a titanium plate of a heat exchanger in which the flowing medium was hot gases with a...
-
Effect of Surface Modification on Erosion Behavior of Alumina-Samarium Strontium Aluminate Composite Thermal Barrier Coatings
The mechanical and tribological characteristics of a thermal barrier coating are highly critical in gas turbine applications to resist...
-
Effect of Bionic Units Fabricated by WC-NiCrBSiFe Laser Cladding on High-Temperature Erosion Wear Resistance of 304 Stainless Steel
To improve the high-temperature erosion wear resistance of 304 stainless steel, this study designed and fabricated bionic samples based on the...
-
New Insights on the Corrosion–Erosion Behavior of 904L Stainless Steel in Phosphoric Acid Containing Impurities
This research aims to provide a new interpretation of the corrosion–erosion behavior of 904L stainless steel in a phosphoric acid environment,...
-
A comprehensive Review on the Hot Corrosion and Erosion Performance of thermal Barrier Coatings
AbstractThermal barrier coatings (TBCs) are primarily utilized to give thermal insulation to metallic components like turbine blades, vanes, in gas...
-
Coiled Tubing Erosion Prediction and Fracturing Fluid Parameters Optimization During Hydraulic Jet Fracturing
The erosion wear of coiled tubing wound on the drum by fracturing fluid gravel greatly affects its service life and the operation safety during...
-
A Simple Approach for Coarse Particle Stress-Erosion Test with Experimental Validation
Damage induced by coarse particle erosion is the main cause of premature failure of transport structures used in deep-sea mining. In this study, a...
-
Influence of grain size of Cu target on its magnetron sputtering erosion and parameters
Herein, the Cu target is prepared by combining different pieces, with a large variation in grain size, and installed in a UDP-650 closed-field...
-
Evaluation and Assessment of a Superheater-Tube Elbow in a Coal-Based Power Plant Boiler after 10 Years of Operation
Inspection of each piece of equipment is required as part of a power plant-reliability program. Detailed procedures and assessments are developed...
-
Erosion and deuterium retention behavior of tungsten exposed to impurity-seeded deuterium plasma
The effect of plasma impurity seeding on erosion and deuterium (D) retention behavior of tungsten (W) is investigated on linear experimental plasma...
-
Metallurgical Failure Analysis of Economizer Tube of Thermal Power Plant
In present investigation, failure investigation of failed economizer tube of boiler of the thermal power plant was analyzed through visual...
-
Residual Life Study of Coiled Tubing for Erosion Wear
Erosion wear will cause corrosion pits, local thinned area, micro-fracture and other defects for coiled tubing’s, resulting in shortened service...
-
Failure Mechanisms of APS-YSZ-CoNiCrAlY Thermal Barrier Coating Under Isothermal Oxidation and Solid Particle Erosion
The high-temperature oxidation and solid particle erosion of thermal barrier coating (TBC) system which consists of a 8 wt.% yttria-partially...
-
Metallurgical Investigation of Buried Ductile Cast Iron Sewerage System Pipeline Premature Failure
Premature failure of two upward-inclined underground pipes carrying sewage caused sinkhole formation in a busy urban road. Metallurgical failure...
-
Thermal Spray Coatings for Erosion–Corrosion Resistant Applications
Thermal spray techniques have been extensively used to deposit coatings of varying compositions on a variety of industrial components for life...
-
Erosion-corrosion and its mitigation on the internal surface of the expansion segment of N80 steel tube
We investigated erosion-corrosion (E-C) and its mitigation on the internal surface of the expansion segment of N80 steel tube in a loop system using...
-
Failure Investigation of Boiler Tube: A Root Cause Analysis
In a thermal power plant, water wall boiler tube made of Cr–Mo low alloy steel, failed during operation. Post failure investigation revealed ‘fish...
-
Root Cause Analysis of SuperHeat Exchanger Tubes of Bagasse-Fired Power Plant
Root cause analysis of the heat exchanger tube of bagasse-fired plant is carried out in this work. The investigation involves different methods...
