Search
Search Results
-
EPMA-based mass balance method for quantitative fission product distribution comparison between TRISO particles
Two irradiated AGR-2 TRISO particles were chosen to demonstrate a recently developed mass balance technique in which EPMA-generated concentration...
-
Strength–ductility balance optimization of Fe2NiCr0.5Cu0.2Al0.3Ti0.1 multicomponent alloy via do** trace amounts of boron
Precipitation strengthening/hardening technique is known to significantly improve the strength of multicomponent/high-entropy (MCA/HEA) alloys at the...
-
Redistribution of Minor and Trace Elements During Roasting of Cu-Rich Complex Concentrate in Inert Atmosphere
A Cu-rich polymetallic complex concentrate produced at the Garpenberg Mines of Boliden Mineral AB, Sweden is investigated. Roasting at 700 °C in N 2 ...
-
Improvement of texture and magnetic properties of strip-cast grain-oriented electrical steel by trace Bi addition
The improvement of recrystallization texture and magnetic properties in grain-oriented electrical steel with trace Bi addition processed by strip...
-
Investigating impurities and surface properties in germanium co-doped multi-crystalline silicon: a combined computational and experimental investigation
Directional solidification (DS) method was employed in the production of multi-crystalline silicon (mc-Si) ingot. Extensive research has been...
-
Interface Embrittlement Between 63Sn-37Pb Solder and Au Layer. Part 2: Quantitative Compositional Analysis of Intermetallic Compound Reaction Layers
The interface gold (Au) embrittlement failure mode resulting when a Au protective finish is not completely removed by the soldering process. has been...
-
Manufacturing of High Purity Cr2AlC MAX Phase Material and Its Characterization
Present study discusses about a technique for producing high-purity Cr 2 AlC MAX phase materials and gaining insight into their thermal behavior for...
-
Microstructure and Mechanical Properties of BFe10-1-1 Copper-Nickel Alloy Pipe Automatic TIG Welded Joints at 0° and 180° Positions
In this study, the 2 mm thick BFe10-1-1 copper-nickel alloy pipes were successfully welded using the automatic TIG welding system at 0° and 180°...
-
Volatilization Behavior of Arsenic from a Hematite Ore During Non-isothermal Heating in Argon Atmosphere: An Overview
The high grade iron ore has depleted necessitating the need to investigate the use of low grade ores that may include arsenic-containing iron ores....
-
Precipitation Behaviour at the Interface of an Additively Manufactured M789–N709 Hybrid Alloy
A novel hybrid alloy, designed for plastic injection dies, was fabricated by depositing M789 steel on wrought N709 steel through laser powder bed...
-
Effect of Sulfur on Microstructures and Solidification Characteristics of a Nickel-Base Single Crystal Superalloy
The effects of sulfur on the microstructures and solidification characteristics of a second-generation single crystal superalloy were clarified...
-
Improvement of Oxidation Resistance for Ni-Base Single Crystal Superalloy TMS-238 by Suppression of Sb Segregation at Oxide/Substrate Interface Using CaO
Impurity Sb degrades the oxidation resistance of Ni-base superalloys after Al 2 O 3 crucible melting. The purpose of this study is to clarify the effect...
-
Microstructure and Corrosion Properties of S400E Sorbite Stainless Steel
S400E stainless steel is a new type of sorbite stainless steel that has been developed in China recently. S400E stainless steel exhibits good...
-
Property Changes of Pure Aluminum Castings with Inserted Aluminum Nitride Substrates Caused by Thermal Cycling
In this study, changes in the properties of pure aluminum (trace elements: Mg, Si, Ti, and Fe) castings with inserted aluminum nitride (AlN)...
-
Experimental Study on Thermodynamics of CaO–SiO2–Ce2O3–5wt.% Al2O3 System at 1773 K
The liquidus temperature and relative equilibrium system of CeCe containing system have important basic guiding role for comprehensive utilization of...
-
Heat treatment effect on structural evolution and hydrogen sorption properties of Y0.5La0.2Mg0.3−xNi2 compound
The effect of heat treatment on phase occurrence, crystal structures and hydrogen sorption properties of Y 0.5 La 0.2 Mg 0.3− x Ni 2 compounds has been...
-
Brazing Mechanism of 70% SiCp/Al Composites with Ti Foam/AlSiMg Filler Metal
To explore suitable filler metal for high-volume fraction SiC p /Al composites, 70% SiC p /Al composites were brazed with AlSiMg, AlSiMg6.0Ti and Ti...
-
Phase Equilibria and Thermodynamic Properties of Low Basicity RE-Contained Slags by Critical Evaluation and Experiment
Rare earth slag, as a waste residue of modern industry, lacks sufficient thermodynamic data, resulting in slow progress in comprehensive utilization....
-
On the thermal breakdown of tremolite: a new method for distinguishing between asbestos and non-asbestos tremolite samples
Tremolite asbestos is classified as a carcinogenic substance because it can cause a number of diseases when inhaled. The tremolite breakdown...
-
Physico-Chemical Characteristics of Deselenized Copper Anode Slime
During copper extraction from copper concentrate, the slime generated in a copper electrorefining tank contains many valuable elements like Cu, Ni,...