Search
Search Results
-
Creep Ductility
For a number of creep resistant steels, the creep ductiliy decreases with increasing temperature and time. As a function of stress, the ductiity is... -
Oxidation resistant low-alloyed Ti alloys with good ductility
Oxidation resistance enhancement of pure Ti often comes at the cost of reduced ductility, which is frequently the problem through alloying with sole...
-
Deformation resistance and ductility of 13Cr steel used for the manufacture of hot-worked octg
The article presents the results of studying ductility and deformation resistance of 13Cr steel grades 20Kh13 (0.2C-13Cr), 15Kh13N2B...
-
Divide and conquer: Machine learning accelerated design of lead-free solder alloys with high strength and high ductility
The attainment of both high strength and high ductility is always the goal for structure materials, because the two properties generally are mutually...
-
Ductility Behaviour of Concrete Beams with Flexural Steel-CFRP Composite Reinforcement
Structural engineers always strived for enhancing the performance of Reinforced Concrete flexure members of the structures incorporating ductility... -
Achieving a remarkable low-temperature tensile ductility in a high-strength tungsten alloy
Hot-swaging yields a high ultimate tensile strength of 712 MPa but a limited tensile ductility with the total elongation of 3.6% at a testing...
-
Effect of V on the Hot Ductility Behavior of High-Strength Hot-Stamped Steels and Associated Microstructural Features
The application of microalloying technology has been emerging as an effective method to enhance the strength-ductility synergy of high-strength...
-
Enhancement of strength–ductility synergy in heterostructured 2024Al alloy through tailoring heterogeneity level
To conquer the trade-off between strength and ductility, a new strategy for preparing heterostructured (HS) 2024Al alloys with various heterogeneity...
-
Back stress dynamic balancing strategy enabled strength-ductility synergy in heterostructured Al-SiC composites
Strength-ductility trade-off dilemma remains a significant obstacle to high-strength composites due to the undesirable dislocation storability....
-
Mn Heterogeneity and Ductility Improvement Realized by Slow Heating Mn-Partitioned Pearlite
The Mn heterogeneity in the medium manganese steel has been realized deliberately using fast heating. However, fast heating is not easy for...
-
Tailoring hierarchical microstructures and nanoprecipitates in additive-manufactured Al-Zn-Mg-Cu-Nb alloys for simultaneously enhancing strength and ductility
Additive manufacturing provides an efficient way of producing metallic components with complex geometries. Their microstructure is substantially...
-
Improving density and strength-to-ductility ratio of a 3D-printed Al–Si alloy by high-pressure torsion
Good combination of strength and ductility in metallic materials is always desired. To this end, this study assesses the combination of two modern...
-
Elevating strength–ductility synergy in aluminum matrix composites by multiscale and dual-structured reinforcing particulates
To elevate strength–ductility synergy in aluminum matrix composites, we propose a strategy of forming multiscale and dual-structured (M&D)...
-
Improvement in the Strength–Ductility Balance of Tempered Martensite Steel by Controlling Cementite Particle Size Distribution
We attempted to improve the strength–ductility balance of tempered martensite steel by controlling cementite particle size distribution. Four types...
-
Toward strength-ductility synergy in Al–Mg alloys: augmenting solute Mg concentration and strain-hardening ability via melt spinning and hot extrusion
Al–Mg alloys offer a compelling combination of high tensile strength and low density, yet conventional high-Mg alloying often yields dense Al 3 Mg 2 ...
-
A Novel Multiphase Stainless Steel with Ultra-Low Yield Ratio and High Ductility
This study focuses on develo** a novel multiphase stainless steel with enhanced ductility and an ultralow yield ratio achieved through...
-
Increased ductility of Ni-based metallic glass ribbon pre-annealed at β-relaxation temperature
The lack of ductility is known to be a major drawback in the mechanical properties of amorphous alloys. A temperature impact is often used, as a...
-
Finite-temperature ductility-brittleness and electronic structures of AlnSc (n = 1, 2 and 3)
Finite-temperature ductility-brittleness and electronic structures of Al 3 Sc, Al 2 Sc and AlSc are studied comparatively by first-principles...
-
Towards the Ductility Limit of Large Thin-Walled A356 Alloy Castings
We have developed a casting process termed HMPAC (hot mold with progressive ablation cooling) process that, for the first time, is capable of...
-
A Feasible Thermomechanical Process of a Duplex-Phase Fe–Mn–Al–C Steel for Significantly Increasing Ductility Without Loss of Strength
The controlled thermomechanical treatment was conducted for the mechanical property improvement of Fe–Mn–Al–C duplex low-density steels. The tensile...