Search
Search Results
-
Complex hexagonal close-packed dendritic growth during alloy solidification by graphics processing unit-accelerated three-dimensional phase-field simulations: demo for Mg–Gd alloy
AbstractIn this study, insights into the effect of interfacial anisotropy on a complex hexagonal close-packed (hcp) dendritic growth during alloy...
-
Effect of Aging on Dendritic Array, Ag3Sn Spacing, and Hardness of a Sn-2Ag-0.7Cu Solder Alloy
In addition to the growth of intermetallics, phase dissolution, and precipitation, variation in the dendritic scale of the microstructure is an...
-
Melt Flow-Induced Mechanical Deformation and Fracture Behaviour of Dendrites in Alloy Solidification
Cellular automaton-finite volume approach and finite element method are combined to study flow-induced dendritic deformation in alloy solidification....
-
Mechanism in Solidification of a Ternary Nickel Based Alloy
The experiment employed the use of melt purification and cyclic superheating technique to achieve maximum undercooling of Ni65Cu31Co4 alloy at 300K....
-
Simulating Castable Aluminum Alloy Microstructures with AlloyGAN Deep Learning Model
MaterialMaterials scientists have made progress in controlling alloy performance through microstructureMicrostructure quantification. However,... -
Effect of the Directional Solidification Conditions and the GTE Blade Size on the Dendritic Structure of Nickel Superalloys
Abstract —The influence of the size and structural elements of GTE and GTU blade model samples on the dendritic structure of a high-temperature ZhS-32...
-
Characteristics and Microstructure of 7055 Al Alloy Powder Prepared by Nitrogen Atomization
The defects, particle size, microstructure, solidification rate and thermal stability of nitrogen atomized 7055 Al alloy powder were systematically...
-
Microstructural and Mechanical Investigations in the Solution Annealing Heat Treatment of AlMo0.5NbTa0.5TiZr Refractory High-Entropy Alloy
This paper reports the effect of the solution annealing heat treatment process on the microstructure evolution, hardness changes, and creep behavior...
-
Regulation on Microstructures and Properties of Hypereutectic Al–3.5Fe–2.5Ni Alloy by Controlled Diffusion Solidification
In this study, an Al–3.5Fe–2.5Ni hypereutectic alloy was produced by the Controlled Diffusion Solidification (CDS) process. The effectiveness of the...
-
Effects of Fe Addition on the Phase and Mechanical Properties of Ti-15Mo Alloy
The influence of high content of Fe on the microstructure and mechanical properties of as-cast Ti-15Mo alloy is explored in this work. The alloys... -
Influence of the Geometry of Cast Products on Orientation of Dendritic Crystals Growth and Formation of Hot Cracks
The results of studies of hot cracks formed in cast shapes from low-alloy steel G21Mn5 are presented. Macroand microstructural analyses are carried...
-
Influence of Dendritic Fragmentation through Mg Addition on the Electrochemical Characteristics of Zn–0.5 wt% Al Alloy
Microstructure refinement is known to have a significant effect on the electrochemical properties of the metallic alloys. The current research...
-
Solidification and Strength Behavior of A356 Al Alloy Wheels
Alloy wheels must meet rigorous durability and safety tests to meet structural demand during use. The use of aluminum (Al) alloyed with silicon (Si)...
-
Effect of Mechanical Vibration on Microstructure and Mechanical Properties of AlSi5Cu3 Alloy
The objective of the present study was to investigate the impact of mechanical vibration on the microstructure and mechanical properties of AlSi5Cu3...
-
Impact of Cooling Rate and Nickel Addition on the Dendritic Spacing, Ag3Sn Morphology and Cytotoxicity of Sn-2Ag Solder
Binary Sn-Ag alloys have been investigated extensively, as they are the base components of commercial alloys for medium-temperature applications in...
-
Effect of Chromium on Microstructure and Mechanical Properties of Al–Cu–Er–Zr Alloy
Introduction of 0.3% Cr into Al–Cu–Er–Zr alloy leads to significant modification of the grain structure and almost complete elimination of a...
-
Microstructure development during rapid alloy solidification
AbstractSolidification processing of structural alloys can take place over an extremely wide range of solid–liquid interface velocities spanning six...
-
Microstructure and Properties of ZM5 Alloy Repaired by Cold Welding
The repair of magnesium alloy castings is of great importance in terms of engineering and economic benefits. This study employs the cold welding...
-
Effect of Mn and B Addition on the Microstructure and Properties of Al–Si–Cu–Mg Cast Alloy
An Al–8Si–1Cu–0.35Mg casting alloy with (Mn + B) composite addition was prepared via traditional ingot metallurgy. The effects of (Mn + B) composite...
-
Cross-Scale Simulation of Macro/Microstructure Evolution During Selective Laser Melting of Mg–Gd–Y Alloy
Mg–10Gd–3Y alloy has excellent mechanical properties, and product preparation using SLM technology has great prospects for development. However, the...