Search
Search Results
-
Fatigue (Cyclic Deformation) in Semiconductors
WeakeningFatigue (cyclic deformation) of a material caused by cyclic loading resulting in structural damage leading to catastrophic failure is known...
-
Thermo-Mechanically Coupled Cyclic Deformation and Fatigue Failure of NiTi Shape Memory Alloys Experiments, Simulations and Theories
Written by leading experts in the field, this book highlights an authoritative and comprehensive introduction to thermo-mechanically coupled cyclic...
-
Cyclic Deformation in Nanostructures
Significant increase in strength of ultrafine (UF) and nanocrystalline (NC) material is observed. Deviation in their mechanical behavior from the...
-
Cyclic Deformation in Oxides, Carbides and Nitrides Alumina, Magnesia, Yttria, SiC, B4C and Si3N4
This book presents the fatigue properties of structural materials used for the production of ceramics. It explains the cyclic deformation and how...
-
Uniaxial Electro-Mechanically Coupled Cyclic Deformation of VHB 4905 Dielectric Elastomer: Experiment and Constitutive Model
In the uniaxial deformation mode, the electro-mechanically coupled cyclic deformation of VHB 4905 dielectric elastomer (DE) is systematically studied...
-
Phase-Field Simulations on Thermo-Mechanically Coupled Cyclic Deformation of NiTi SMAs
In this chapter, some phase-field models are proposed to investigate the thermo-mechanically coupled cyclic deformation of NiTi SMA single crystal...
-
Molecular Dynamics Simulations on Thermo-Mechanically Coupled Cyclic Deformation of NiTi SMAs
In this chapter, the molecular dynamics (MD) simulations on the thermo-mechanically coupled cyclic deformation of NiTi SMA single crystal and...
-
Experimental Observations on Thermo-Mechanically Coupled Cyclic Deformation and Fatigue Failure of NiTi SMAs
In this chapter, the thermo-mechanically coupled cyclic deformation features of super-elastic and shape memory NiTi SMAs are experimentally...
-
Monotonic and Cyclic Deformation Behavior of a Silafont®-36 Cast Aluminum Alloy in an Overaged Condition
The aim of this study is to explore and understand the deformation mechanism in an overaged Al-Si high-pressure die cast alloy. Uniaxial tensile and...
-
Deformation Behavior of X70 Pipeline Steel Under Hot Straightening Condition
During the hot straightening process, the sheet undergoes multiple tensile and compressive deformation cycles. In this paper, cyclic tensile tests...
-
Cyclic Deformation Behavior of Silafont®-36 Cast Aluminum Alloy After T5 Heat Treatment
With superior tensile strength and improved fatigue performance of Silafont®-36 alloy in the as-cast state, this study is aimed to evaluate these...
-
Microstructural and Mechanical Evaluation of Pure Copper Rods Processed by Severe Plastic Deformation Method of Hydrostatic Cyclic Extrusion Compression
In this study, a severe plastic deformation method of hydrostatic cyclic extrusion compression (HCEC) was used to produce ultrafine-grained copper...
-
Cryogenic Deformation Behaviour of Aluminium Alloy 6061-T6
Aluminium alloy 6061-T6 (AA6061-T6) shows a promising potential for cryogenic structural applications. This alloy exhibits remarkable monotonic...
-
Investigation on the Effect of Asymmetric Cyclic Loading on Ratcheting Deformation and Bulk Texture Development in HSLA Steel
Ratcheting deformation in association with bulk texture evolution in HSLA steel is studied in this investigation. The cyclic deformation behaviors...
-
Reversible Cyclic Softening in HSLA Steels at Low Homologous Temperatures
Critical mechanical components employed in energy applications require certification of their mechanical response under monotonic or cyclic loading...
-
Atomic-Scale Insights into Damage Mechanisms of GGr15 Bearing Steel Under Cyclic Shear Fatigue
Alternating shear stress is a critical factor in the accumulation of damage during rolling contact fatigue, severely limiting the service life of...
-
A study of the deformation properties of 10GN2MFA and 15Kh2MFA steels taking into account material damageability under plane stress conditions
The paper presents the results of an experimental study of the deformation properties of 10GN2MFA and 15Kh2MFA steels at different ratios of...
-
Cyclic Deformation-Fatigue
Ultrafine grained Al 6061 processed by high-pressure torsion (HPT) at room temperature was tested for the fatigue properties. The HPT processing...
-
A Life Prediction Method for Cyclic Plasticity by the Maximization of Mechanical Dissipation
Dissipation represents an irreversible deformation process and is crucial for the fatigue life of materials. A precise calculation of the evolution...
-
Correlation Characteristics of the Deformation Relief of an Aluminum Alloy Under High-Cycle Fatigue
The mechanical properties, alloy microstructure, and fatigue resistance under cyclic loading of a 1.5 mm thick D16 sheet with a stress concentrator...
