We are improving our search experience. To check which content you have full access to, or for advanced search, go back to the old search.

Search

Please fill in this field.
Filters applied:

Search Results

Showing 1-20 of 10,000 results
  1. Application of Artificial Neural Network to Predict the Crystallite Size and Lattice Strain of CoCrFeMnNi High Entropy Alloy Prepared by Powder Metallurgy

    An equiatomic CoCrFeMnNi high entropy alloy (HEA) was prepared by the gas atomization process. In addition, high-energy milling was carried out to...

    Cheenepalli Nagarjuna, Sheetal Kumar Dewangan, ... Byungmin Ahn in Metals and Materials International
    Article 26 December 2022
  2. Influences of nano-3Y-TZP reinforcement on phase transformation and crystallite size modification of zirconia-toughened alumina and Rietveld refinement of crystallographic data

    The effects of varying amount of nano-3 mol% yttria-stabilized zirconia addition on the crystal structures, mechanical, and microstructural...

    Sajib Aninda Dhar, Saugata Sarker, ... A. K. M. Bazlur Rashid in Journal of the Korean Ceramic Society
    Article 21 December 2022
  3. Crystallite size and recrystallization effect on electrical parameters of highly ion-conductive Ag7Si0.4Ge0.6S5I ceramics

    Preparation, phase and microstructural analysis, microhardness, electrical conductivity investigation of Ag 7 Si 0.4 Ge 0.6 S 5 I nanocrystalline powders and...

    Artem Pogodin, Mykhailo Filep, ... Peter Kúš in Journal of Materials Science: Materials in Electronics
    Article 25 September 2023
  4. Image Processing Pipeline for Fluoroelastomer Crystallite Detection in Atomic Force Microscopy Images

    Phase transformations in materials systems can be tracked using atomic force microscopy (AFM), enabling the examination of surface properties and...

    Mingjian Lu, Sameera Nalin Venkat, ... Yinghui Wu in Integrating Materials and Manufacturing Innovation
    Article 08 December 2023
  5. Synthesis and thermal analysis of nano-crystallite copper phosphate mixture and its composites as thermal energy conservation material in building coating

    The nano-crystallite mixture, Cu 3 (PO 4 ) 2 ·0.13(NH 4 ) 2 SO 4 , and its composite coatings have been synthesized and characterized with different measurement...

    Sisir Kumar Sethy, Arakshita Majhi, ... Trilochan Swain in Bulletin of Materials Science
    Article 31 July 2023
  6. Crystallite Size Effect on X-ray-instigated Photocurrent Properties of PbWO4 Thick Film

    X-rays are widely used in many domains such as clinical diagnostic, imaging, industrial inspection, and environmental safety, allowing researchers...

    R. R. Karthieka, G. Devanand Venkatasubbu, T. Prakash in Electronic Materials Letters
    Article 29 March 2022
  7. Effects of pH on Grain Size and Structure of ZnO Nanoparticle Synthesized via Sol–Gel Method for Enhanced Thermoelectric Materials

    Zinc Oxide (ZnO) emerges as a potential thermoelectric material with high thermoelectric performance suitable for enhancing power harvesting...
    Suraya Sulaiman, Tuan Muhammad Tuan Zahrin, ... Mohamad Farid Mohamad Sharif in Intelligent Manufacturing and Mechatronics
    Conference paper 2024
  8. Variable Dielectric and Ferroelectric Properties in Size-Controlled Cobalt Ferrite

    The nano-form of cobalt ferrite (CoFe2O4) is fascinating for fabrication of nano-magnets and miniaturized electronic devices. A comparative...
    S. Shankar, Vinita Tuli, ... M. Jayasimhadri in Advanced Functional Materials and Devices
    Conference paper 2022
  9. Crystallite Size and Compressive Lattice Strain in NiFe2O4 Nanoparticles as Calculated in Terms of Various Models: Influence of Annealing Temperature

    Abstract

    NiFe 2 O 4 nanoparticles were synthesized by HMTA-assisted hydrothermal method, annealed at 600, 800, and 1000°C for 4 h, and characterized by...

    Article 01 October 2020
  10. Size-Dependent Magnetic and Magneto-Optical Properties of Bi-Doped Yttrium Iron Garnet Nanopowders

    Bi-doped yttrium iron garnet nanopowders were successfully synthesized by a combustion method at different synthesis conditions, and the evolution of...

    Aleksandr Spivakov, Chun-Rong Lin, ... Ying-Zhen Chen in Nanoscale Research Letters
    Article Open access 04 August 2022
  11. Influence of CoFe2O4 particle size on the development of in-situ phases and magnetic properties of ex-situ combustion derived ferrite-BaTiO3 composite

    The evolved in-situ phases may tune the structural parameters and magnetic properties of the ferrite-BaTiO 3 based composite. Here, CoFe 2 O 4 is...

    Sreenivasulu Pachari, Swadesh K. Pratihar, Bibhuti B. Nayak in Journal of Electroceramics
    Article 12 June 2024
  12. Nickel ferrite magnetic nanoparticles: evidence for superparamagnetism in smaller size particles

    Nickel ferrite magnetic nanoparticles have been synthesized by the co-precipitation method using stable nickel chloride and iron chloride salts with...

    P. Priyadharshini, P. A. Shobika, ... K. Pushpanathan in Journal of the Australian Ceramic Society
    Article 05 August 2022
  13. Fe3O4 nanoparticles synthesized by one-step reduction with nanoscale size-dependent magnetic properties

    Magnetic Fe 3 O 4 nanoparticles (NPs) were successfully synthesized by the one-step reduction method. The microstructure, morphology, and magnetic...

    Song-wei Ge, **ao-yu Wang, ... Kuai-She Wang in Journal of Sol-Gel Science and Technology
    Article 28 October 2022
  14. ZrO2 Nanoparticles Synthesized by the Sol–Gel Method: Dependence of Size on pH and Annealing Temperature

    Zirconium oxide(ZrO 2 ) is an important ceramic material characterized by a wide optical bandgap, low optical losses, high dielectric constant,...

    Gayatri Shishodia, Shubhra Gupta, ... P. K. Shishodia in Journal of Electronic Materials
    Article 07 June 2024
  15. Pore size influence in fabricating DCPD-Coated Porous β-TCP granules: compositional, morphological, and functional group perspective

    This study aims to understand the influence of pore size on the compositional, morphological, and functional group characteristics of dicalcium...

    Ahmed Hafedh Mohammed Mohammed, Khairul Anuar Shariff, ... Takayoshi Nakano in Journal of the Australian Ceramic Society
    Article 27 April 2024
  16. Suppression of intermediate antiferroelectric phase in sub-micron grain size Na0.5Bi0.5TiO3 ceramics

    Lead-free NBT ceramics with average grain sizes ranging from sub-micron (0.38 µm), micron (1.23 µm) and large-micron (3.65 µm) were prepared and the...

    L. Venkidu, D. E. Jain Ruth, ... B. Sundarakannan in Journal of Materials Science: Materials in Electronics
    Article 07 October 2022
  17. YAG-Ceramic Powders — Size-Reduction Influence on Optical Ceramic Properties

    The morphology and degree of agglomeration of the precursor and YAG-ceramic powders were investigated as functions of the grinding conditions,...

    V. E. Suprunchuk, A. A. Kravtsov, ... F. F. Malyavin in Glass and Ceramics
    Article 01 March 2024
  18. Investigating the impact of Cs do** on physical properties and unveiling its potential as a UV detector on ZnO thin films

    Herein, we present a study on the influence of Cs do** concentration on the physical properties of ZnO films. The films were deposited using the...

    Faeza Alkorbi, Sherif M. Mostafa, ... Ahmed A. Aboud in Journal of Materials Science: Materials in Electronics
    Article 11 December 2023
Did you find what you were looking for? Share feedback.