Search

Search Results

1. Electronic Structure Using Powder XRD and Its Correlation with the Origin of Room-Temperature Magnetism in Cr³⁺ Doped SnO₂

   The maximum entropy method-based electronic structure of co-precipitated dilute magnetic semiconducting (DMS) material Cr _x Sn _{1− x} O ₂ : x = 0.025, 0.05,...

   K. KaviyaPandimeena, M. Charles Robert, M. Arulmozhi in Journal of Electronic Materials

   Article 02 June 2024
   

2. Tailoring the Structural, Optical and Anti-corrosion Effect of Synthesized Sn-Doped CuO Nanoparticles on Mild Steel in 0.5 M HCl Solution

   This study dealt with the synthesis of pure and Sn-doped CuO with different concentrations ( x = 0.000, 0.005, and 0.010) capped with...

   M. Y. El Sayed, Nour El Ghouch, ... R. Awad in Journal of Materials Engineering and Performance

   Article 07 February 2024
   

3. Photocatalytic degradation of organic dyes under visible light on sol-gel derived M/ZnO (M=Cr, Mn, Sn, Fe, Ni, Cu, Co, Ba) catalysts

   A series of ZnO photocatalysts were developed by sol-gel method for photocatalytic degradation of dyes in textile wastewater under visible light...

   Beyza Demir, Melek Tüter, Şeyma Özkara-Aydınoğlu in Journal of Sol-Gel Science and Technology

   Article 11 May 2022
   

4. Room-temperature gas sensing properties of Zn, Sn and Cu-doped TiO₂ films

   In this work TiO ₂ and metal-doped TiO ₂ films were grown by Successive Ionic Layer Adsorption and Reaction Method (SILAR) with the same do** ratio...

   Tuğba Çorlu, Sezen Tekin, ... Selim Acar in Journal of Materials Science: Materials in Electronics

   Article 27 November 2023
   

5. Dielectric and structural properties of pure and Sn-mixed Ga₂O₃ compounds

   The optical, structural, and dielectric properties of SnO ₂ –Ga ₂ O ₃ nanocomposites were investigated in details. Sn-mixed Ga ₂ O ₃ compounds (Sn...

   Saurabh Yadav, Amit Kumar Singh, ... Y. S. Katharria in Journal of Materials Science: Materials in Electronics

   Article 23 February 2023
   

6. Perovskite solar cells: investigation of structural, optical and device performance analysis of Al–Sn co-doped ZnO electron transport layer

   Synthesis of undoped and Aluminum (Al)—Tin (Sn) (2 & 4 wt%) co-doped Zinc Oxide (ZnO) Nanoparticles (NPs) is achieved by co-precipitation technique....

   A. Pramothkumar, N. Senthilkumar, ... I. Vetha Potheher in Journal of Materials Science: Materials in Electronics

   Article 23 February 2023
   

7. Sonochemical synthesis of Sn-doped La₂O₃ nanoparticles and its application for the photocatalytic degradation of hazardous pollutants

   The sonochemical technique is used to develop tin (Sn)-doped lanthanum oxide (La ₂ O ₃ ) nanoparticles (La ₂ O ₃ –Sn NPs) with a narrow particle size...

   S. Karthikeyan, K. Dhanakodi, ... A. T. Rajamanickam in Journal of Materials Science: Materials in Electronics

   Article 16 May 2023
   

8. Impact of multiple cations do** on Zn–Sn–Se nanostructures for optoelectronic applications

   The ever evolving of electronic devices and systems has prompted companies in the electronic industry sector to urge researchers to explore novel...

   Mostafa S. Eraky, Moustafa M. S. Sanad, Arafat Toghan in Journal of Materials Science: Materials in Electronics

   Article 25 January 2023
   

9. Influence of Sn Do** on the Structural, Morphological, Optical and Photocatalytic Functionality of ZnO Nanostructures

   In the present study, pure and Tin (Sn) doped ZnO (Sn–ZnO) nanostructures are grown using hydrothermal method. The effect of Sn do** on the...

   K. Ganesh Kumar, P. Balaji Bhargav, ... C. Balaji in Transactions on Electrical and Electronic Materials

   Article 19 March 2021
   

10. Boosting Electrochemical Performance of Ni-rich Layered Cathode Via Li₂SnO₃ Surface Coating and Sn⁴⁺ Gradient Do** Based Dual Modification for Lithium-ion Batteries

    Abstract

    Ni-rich ternary oxide cathode (LiNi _0.8 Co _0.1 Mn _0.1 O ₂ , NCM) is highly promising candidate for lithium-ion batteries (LIBs) due to its...

    Chea-Yun Kang, Seokhoon Oh, ... Seung-Hwan Lee in Electronic Materials Letters

    Article 18 February 2023
    

11. Transition metal (TM = V, Cr, Mn, Fe, Co, Ni)-doped GeSe diluted magnetic semiconductor thin films with high-temperature ferromagnetism

    Group-IV metal chalcogenides-based diluted magnetic semiconductor (DMS) thin films with high-temperature ferromagnetism (FM) are desirable for...

    Deren Li, ** Zhang, ... Gang **ang in Science China Materials

    Article 08 December 2023
    

12. Investigating the physical, mechanical, and reliability study of high entropy alloy reinforced Sn–3.0Ag–0.5Cu solder using 1608 chip capacitor/ENIG joints

    High entropy alloy (HEA) receives noticeable attention in the electronic industry, and one of the best ways to incorporate HEA with the existing...

    Sri Harini Rajendran, Do Hyun Jung, Jae Pil Jung in Journal of Materials Science: Materials in Electronics

    Article 05 January 2022
    

13. Evaluation of the effect of high concentration of dopant (Cr, Sn) on structural, optical, and wettability properties of ZnO thin films

    Cr- and Sn-co-doped ZnO thin films were prepared via so-gel technique onto glass substrates. The produced films were characterized by XRD (X-ray...

    Mahdi Mozammel, Nasrollah Najibi Ilkhechi, ... Elahe Rezaei in Journal of the Australian Ceramic Society

    Article 14 February 2019
    

14. Structural Stability and Optoelectronic Properties of Lead-Free Halide Perovskite CsSnBr₃ by Introducing Transition-Metal Dopants

    In order to promote the actual optoelectronic application of lead-free perovskite CsSnBr ₃ , the stability and optoelectronic properties of metal...

    Fengjie Tang, Yizhou Yao, ... Haibo Shu in Journal of Electronic Materials

    Article 18 April 2022
    

15. A review on the p-type transparent Cu–Cr–O delafossite materials

    Transparent conductive oxides (TCOs) constitute a class of materials that combine high electrical conductivity and optical transparency. These...

    Marco Moreira, Joao Afonso, ... Petru Lunca-Popa in Journal of Materials Science

    Article Open access 17 January 2022
    

16. Photoluminescence and Chemoresistive Gas Sensing: A Comparative Study Using V2O5 Nanostructures for NH3

    In this study, pristine and tin-doped vanadium pentoxide nanoparticles were synthesized via hydrothermal method and characterized using X-ray...

    Nitu Singh, Jyoti Bamne, ... Fozia Z. Haque in Emerging Trends in Nanotechnology

    Chapter 2021
    

17. Effects of Alloying Elements on Hydrogen Adsorption Properties on Zirconium Surface

    We theoretically investigated the effects of alloying elements Sn, Nb, Cr, Mo, Fe, Ni, and Sb, which can improve the corrosion resistance of...

    Ju-Yong Jong, Su-Jong Hong, ... Chol-Hun Hwang in Metallurgical and Materials Transactions A

    Article 18 November 2022
    

18. A generic designing rule for realizing quantum anomalous Hall phase in a transition-metal trichalcogenide family

    Different from introducing ferromagnetism in three-dimensional (3D) topological insulators, empowering nontrivial band topology with 2D ferromagnetic...

    Wenjia Yang, Yaling Zhang, ... **aohong Xu in Science China Materials

    Article 25 November 2022
    

19. Impact of Sn⁴⁺ Substitution at Cr³⁺ Sites on Thermoelectric and Electronic Properties of p-Type Delafossite CuCrO₂

    The effects of Sn ⁴⁺ substitution at Cr ³⁺ sites on the thermoelectric and electronic properties of p -type delafossite CuCrO ₂ have been studied. CuCr _{1− x} Sn...

    Sakwiboon Jantrasee, Chesta Ruttanapun in Journal of Electronic Materials

    Article 12 November 2019

20. Cobalt modified enhancement in photocatalytic efficiency of SnO₂ nanoparticles for removal of industrial dyes

    This study aims to investigate the photocatalytic and photoluminescence attributes of pure and cobalt-doped SnO ₂ nanoparticles for potential...

    Prasanta Kumar Mishra, Nihar Ranjan Panda, ... Dojalisa Sahu in Journal of Materials Science: Materials in Electronics

    Article 01 November 2023