Search

Search Results

1. Defect Formation during the Manufacture of Copper Alloy Tubes

   The causes promoting the formation of defects on the internal surface of two different copper alloys subjected to cold rolling to fabricate seamless...

   Nelson F. Garza-Montes-de-Oca, Rodrigo Puente-Ornelas, ... Rafael Colás in Journal of Failure Analysis and Prevention

   Article 22 November 2023
   

2. Electrochemical Assessment of Nano Ethyl Methacrylate-Methyl Acrylate Copolymer as Protective Coating for Copper Based Alloy in Sea Water

   Abstract

   The behavior of tin based copper alloy in sea water was studied by immersion of alloy samples in sea water for six months. The samples were...

   Ossama Ali Abdullatef, Mohamed Ahmed Helal, Shereen Mohamed Anwar in Protection of Metals and Physical Chemistry of Surfaces

   Article 01 August 2023
   

3. Wear and Frictional Behavior of Copper Modified Ti-6Al-4V Alloy

   The effect of copper addition on the dry sliding wear and frictional behavior of Ti-6Al-4V alloy in different heat treatment conditions, i.e., in...

   G. V. S. Nageswara Rao, Polamuri Sudheer Kumar, Naga Sruthi Neelam in Journal of Materials Engineering and Performance

   Article 06 June 2024
   

4. Strengthening of Copper-Nickel Alloy Cu95Ni5 with Titanium Carbide Particles

   Strengthening of copper and copper alloys without a significant change in their basic characteristics, such as electrical conductivity, thermal...

   O. V. Samoilova, N. A. Shaburova in Metallurgist

   Article 30 May 2023
   

5. Arc erosion property and mechanism of tungsten–copper alloy with multi-scale tungsten particles

   In this work, tungsten–copper (W–Cu) alloy with multi-scale tungsten phase was prepared by cold isostatic pressing, vacuum sintering and hot...

   **ran Wang, Shizhong Wei, ... **nna Cao in Journal of Materials Science

   Article 16 January 2024
   

6. Corrosion and Wear Resistance of HVOF-Sprayed Ni-Cr-Co Multi-principal Element Alloy Coating on Copper Plate

   The development of protective coatings on copper alloy surfaces represents a critical research direction to enable the widespread industrial...

   Dongbao Huang, Zhenlin Xu, ... Tingwei Zhou in Journal of Thermal Spray Technology

   Article 16 May 2024
   

7. Quantitative Nondestructive Evaluation of Cold Spray Manufactured Aluminum Alloy 6061 and Copper Samples

   Cold spray (CS) is a solid-state process for depositing thick layers of material via the successive high-velocity impact of powder particles onto a...

   Kishore Kumar Indu Kumar, Mann Baijukumar Patel, ... Ozan Ç. Özdemir in Journal of Thermal Spray Technology

   Article Open access 28 February 2024
   

8. Iron-Based Amorphous Alloy Enhanced Electrokinetic Method for Remediation of Copper-Contaminated Soil

   Iron-based amorphous alloy (Fe ₇₈ Si ₉ B ₁₃ ^AP ) permeability reaction barrier (PRB)-enhanced electrokinetic method (Fe ₇₈ Si ₉ B ₁₃ ^AP -EK) was used to remediate...

   Liefei Pei, **angyun Zhang, Zizhou Yuan in Transactions of the Indian Institute of Metals

   Article 07 July 2023
   

9. Effects of Nickel on the Interface Behavioral Mechanisms of Copper Alloy/Steel Bimetals

   In this study, bimetallic specimens comprising copper alloy and carbon steel are prepared using a liquid–solid compound casting method. Our results...

   Yuanyuan Kang, Guowei Zhang, ... Zhaojie Wang in Journal of Materials Engineering and Performance

   Article 26 December 2023
   

10. Effect of Low-Temperature Annealing on the Bending Properties of C19400 Copper Alloy Strips

    As connectors become miniaturized, higher requirements are put forward for the bending performance of the materials used. In this paper, the effect...

    Hongjiao Gao, Yanmin Zhang, ... Aikui Liu in Journal of Materials Engineering and Performance

    Article 26 June 2023
    

11. Effect of Copper and Silicon on the Corrosion Properties of the AlCrFeMnNi High Entropy Alloy

    Microstructural and electrochemical corrosion behaviours of Al ₄₀ (SiCrFeMnNiCu) ₆₀ (at %) high entropy alloy (HEA) were studied. The as-cast-alloy...

    R. R. Tripathy, Y. Shadangi, ... N. K. Mukhopadhyay in Transactions of the Indian Institute of Metals

    Article 28 April 2024
    

12. Investigation on Mechanical Behavior of LM26 Aluminum Alloy—ZrB₂ and Copper-Coated Short Steel Fiber-Reinforced Composites Using Stir Casting Process

    Currently there is a growing interest in investigating aluminum alloy-based hybrid composites due to their growing importance in the automotive and...

    S. N. Vijayan, Samson Jerold Samuel Chelladurai, A. Saiyathibrahim in International Journal of Metalcasting

    Article 14 March 2024
    

13. Copper–Nickel Alloy Friction Surfaced Coating on Steel Substrates for Marine Applications

    Copper–nickel (Cu-Ni) alloys are candidate materials for marine applications where bio-fouling and sea water corrosion resistance is crucial....

    A. V. Sreenu, M. Jagadeeswara Rao, ... G. Venkata Sarath Kumar in Transactions of the Indian Institute of Metals

    Article 27 March 2024
    

14. Greek and Roman Copper Alloy Coins (Fifth Century BC—Third Century AD): from Microstructures to Manufacturing Process

    In this article, we are focusing on the manufacturing techniques of Greek and Roman copper alloy coins (fifth century BC—third century AD). Thanks to...

    Alexandre BODET in Metallography, Microstructure, and Analysis

    Article 27 March 2023
    

15. Silver and Copper Coating Effects on Surface Morphology, Crystal Structure and Corrosion Behavior of NiTinol Shape Memory Alloy Plate

    NiTinol alloy has recently been in high demand in biomaterials applications due to its excellent superelasticity and shape memory properties. This...

    Yakup Say, Muhammed Sait Kanca, Mediha Kök in Transactions of the Indian Institute of Metals

    Article 23 January 2023
    

16. Difference in adiabatic shear susceptibility between pure copper and Cu–30% Zn solid solution alloy at different strain rate

    The difference in adiabatic shear susceptibility between pure copper and Cu–30% Zn alloy with similar grain size was investigated. The results show...

    Yang Yang, Jianlin He, ... **aolong Lian in Journal of Materials Research

    Article 23 January 2023
    

17. Microstructure, EBSD, and Corrosion Resistance of Ni_p Modified H63 Copper Alloy Prepared by FSSP

    Based on the method of friction stir surface processing (FSSP), the Ni _p /H63 modified surface layer was obtained by adding nickel particles (Ni _p ) to...

    W. W. Song, D. W. Zuo, ... J. F. Pu in Strength of Materials

    Article 01 March 2023
    

18. Protection of Copper and Its MNZh 5-1 Alloy with Sodium Salts of Malonic and Ethylmalonic Acids in a Neutral Chloride Solution

    Abstract

    The adsorption, protective, and passivating effects of sodium salts of malonic and ethylmalonic acids on the oxidized and reduced surface of...

    N. P. Andreeva, I. A. Kuznetsov, ... M. O. Agafonkina in Protection of Metals and Physical Chemistry of Surfaces

    Article 01 December 2022
    

19. Early-Warning System for Copper Alloy Abnormal Molten Pool in Wire-Arc Additive Manufacturing via Convolutional Neural Network Method

    In the process of copper alloy wire-arc additive manufacturing (WAAM), improper process parameters lead to an unstable additive manufacturing process...

    Tianyang Zhang, Lvyuan Wang, ... Kehong Wang in Journal of Materials Engineering and Performance

    Article 22 February 2023
    

20. Acoustic and Electromagnetic Properties of Maraging Iron–Chromium–Nickel Alloy with Addition of Copper in Mechanical Tension

    Abstract

    The results of studying the acoustic and electromagnetic properties of KhM-12 (15-5 PH, also known as also known as UNS S15500) maraging...

    V. V. Murav’ev, O. V. Murav’eva, A. L. Vladykin in Russian Journal of Nondestructive Testing

    Article 01 May 2023