Search

Search Results

1. Comparison of Wear Behavior of Basic Oxygen Furnace Slag and WC-CoCr Coating

   Metallurgical slags can be re-evaluated depending on their structural properties for reuse in many industrial applications. This study investigated...

   Dervis Ozkan, Ahmet Gulec, ... Abdullah Cahit Karaoglanli in Journal of Materials Engineering and Performance

   Article 28 May 2024
   

2. Vibration and Audio Measurements in the Monitoring of Basic Oxygen Furnace Steelmaking

   A basic oxygen furnace (BOF) is the main unit process for refining carbon steel. The aim of this work was to study the use of vibration and audio...

   Juhani Nissilä, Mika Pylvänäinen, ... Toni Liedes in Metallurgical and Materials Transactions B

   Article Open access 01 September 2023
   

3. Phosphorus Partition Between Liquid Crude Steel and High-Basicity Basic Oxygen Furnace Slags Containing V₂O₅

   The influence of V ₂ O ₅ on the phosphorus partition between liquid crude steel and heterogenous basic oxygen furnace (BOF) slag with CaO/SiO ₂ = 4.2 was...

   Lukas Neubert, Oleksandr Kovtun, ... Olena Volkova in Metallurgical and Materials Transactions B

   Article Open access 19 April 2023
   

4. Failure Analysis Leading to Improved Materials Selection for Precipitator Wires in a Basic Oxygen Furnace

   The wires used in a wet precipitator for cleaning the gases coming off a basic oxygen furnace failed. The system consisted of six precipitators,...

   G. F. Vander Voort in Journal of Failure Analysis and Prevention

   Article 01 October 2022
   

5. Modification of Basic Oxygen Furnace Slag Using Iron Ore Tailing and Blast Furnace Dust

   Due to the accumulation of solid wastes, more and more attention has been paid to the recycle and reuse of basic oxygen furnace (BOF) slag. However,...

   Liang Wang, Wei Ren, ... **lian Li in 12th International Symposium on High-Temperature Metallurgical Processing

   Conference paper 2022
   

6. Applied Mineralogical Investigation on the Nature of Phosphorous in the Basic Oxygen Furnace Slag

   Slag generating from the basic oxygen furnace during steelmaking is one of the significant solid wastes that has not been recycled due to many...

   Sunil Kumar Tripathy, D. S. Rao, ... D. Sahoo in Transactions of the Indian Institute of Metals

   Article 26 June 2021
   

7. Optimization of Energy Efficiency of Electric Arc Furnace Steelmaking

   To enhance the production efficiency of electric arc furnaces, conserve energy, and reduce consumption, a study was conducted to analyze the energy...

   A. Xu, R. Zhu, ... R. Zhao in Characterization of Minerals, Metals, and Materials 2024

   Conference paper 2024
   

8. Contribution of Emulsion Zone in Refining of Basic Oxygen Steelmaking Converter

   The importance of emulsion zone formation in the basic oxygen steelmaking (BOF) process lies in its crucial role in enhancing refining efficiency....

   Prasenjit Singha in Metallurgical and Materials Transactions B

   Article 16 May 2024
   

9. Convolutional Recurrent Neural Network to Determine Whether Drop** Slag Dart Fills the Exit Hole During Tap** in a Basic Oxygen Furnace

   This paper presents a system that uses a convolutional recurrent neural network (CRNN) model to determine automatically whether or not a slag dart...

   Dae-geun Hong, Woong-hee Han, Chang-Hee Yim in Metallurgical and Materials Transactions B

   Article 08 September 2021
   

10. Information-Simulating System for Distribution of Hot Blast and Natural Gas Through the Blast Furnace Tuyeres

    The paper presents a description of the information modeling system for the distribution of hot blast and natural gas through the tuyeres of a blast...

    N. A. Spirin, I. A. Gurin, ... G. A. Fedotov in Metallurgist

    Article 01 November 2023
    

11. Hydrometallurgical detoxification and recycling of electric arc furnace dust

    Electric arc furnace dust (EAFD) is a hazardous waste but can also be a potential secondary resource for valuable metals, such as Zn and Fe. Given...

    Yang Xue, **aoming Liu, ... Yonghui Han in International Journal of Minerals, Metallurgy and Materials

    Article 23 September 2023

12. Effect of Oxygen on Water Vapor Oxidation of Fe by Oxygen Partial Pressure Control Using Gas Sensor

    An oxygen pump sensor was installed in front of an oxidation furnace to supply and discharge oxygen to the Ar–H ₂ O atmosphere and accurately control...

    Michihisa Fukumoto, Kano Nakajima in High Temperature Corrosion of Materials

    Article 21 January 2023
    

13. Strength and Bonding Mechanism of Nonhydraulic Cementitious Binders: Reutilization of MgO in Basic Oxygen Furnace Dust

    Basic Oxygen Furnace (BOF) dust is a secondary resource with high total iron (TFe) content produced in metallurgical steelmaking process. It is the...

    **ang Li, ** Tang, ... Guanghua Wen in Metallurgical and Materials Transactions B

    Article 08 March 2021
    

14. Process metallurgy and data-driven prediction and feedback of blast furnace heat indicators

    The prediction and control of furnace heat indicators are of great importance for improving the heat levels and conditions of the complex and...

    Quan Shi, Jue Tang, Mansheng Chu in International Journal of Minerals, Metallurgy and Materials

    Article 27 May 2024

15. Lead Blast Furnace Dust Recycling

    The recyclingRecycling of lead (Pb), which has a limited reserve in the world, has great importance in terms of sustainable and efficient use of...

    Soner Top, Mahmut Altiner, Sait Kurşunoğlu in Recycling Technologies for Secondary Zn-Pb Resources

    Chapter 2023
    

16. Desulphurization of Hot Metal in Pre-treatment Process with a Flux Containing Basic Oxygen Furnace Slag and CaO

    Recycling of the slag is a crucial challenge for the steel-producing companies because of a huge amount of the slag produced in the steel companies....

    Cao Son Nguyen, Trung Duc Tran, Anh Hoa Bui in Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020)

    Conference paper 2021
    

17. Failure Analysis of Basic Oxygen Furnace Lance Head Assembly

    In a steel plant, basic oxygen furnace (BOF) is a method to convert liquid hot metal and steel scrap into steel with oxidizing action of oxygen...

    Sanjay Kumar Gupta, Anjana Deva, ... Kiran Kumar Keshari in Journal of Failure Analysis and Prevention

    Article 13 April 2020
    

18. Coke behavior with H₂O in a hydrogen-enriched blast furnace: A review

    Hydrogen-enriched blast furnace ironmaking has become an essential route to reduce CO ₂ emissions in the ironmaking process. However,...

    Feng Zhou, Daosheng Peng, ... Jianliang Zhang in International Journal of Minerals, Metallurgy and Materials

    Article 01 May 2024

19. Reaction Mechanism in EAF Steelmaking Process Based on Selective Oxidation, Bath Stirring and Furnace Body Heat Transfer

    EAF steelmakingEAF steelmaking is characterized by complex charge structureStructure, vigorous chemical reaction, and intensive energy source. The...

    Lingzhi Yang, Zeng Feng, ... Yufeng Guo in Characterization of Minerals, Metals, and Materials 2024

    Conference paper 2024
    

20. Hybrid model for BOF oxygen blowing time prediction based on oxygen balance mechanism and deep neural network

    The amount of oxygen blown into the converter is one of the key parameters for the control of the converter blowing process, which directly affects...

    **n Shao, Qing Liu, ... Shaoshuai Li in International Journal of Minerals, Metallurgy and Materials

    Article 26 January 2024