Search

Search Results

1. Cryogenic Forming Process and Equipment for Aluminum Alloy Thin Shells

   Aluminum alloy thin components are widely applied as structures in aerospace, aircraft, and electric vehicle. It is very challengeable to overcome...

   **aobo Fan, **anshuo Chen, Shijian Yuan in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

2. Study on the Influence of Prefabricated Aluminum Layer Technology on the Properties of Corrugated Interface Steel/Aluminum/Aluminum Alloy Composite Panel

   The thick gauge steel/aluminum/aluminum alloy composite panel is crucial for marine steel-aluminum transition joints and is extensively used in...

   Wenwen Liu, Na** Wang, ... Zhongyu Chen in Journal of Materials Engineering and Performance

   Article 09 May 2024
   

3. Asymmetrical Rolling of Aluminum Alloy 6061

   Aluminum alloy 6061 is a good candidate for automotive sheet components due to its good mechanical properties. However, its formability is low when...

   Julie Lévesque, Alexandra Béland in Proceedings of the 61st Conference of Metallurgists, COM 2022

   Conference paper 2023
   

4. Cryogenic Forming Potential of Large Diameter and Thin-Walled Aluminum Alloy Tubular Materials

   The large-diameter and thin-walled aluminum alloy tube has superiority in terms of weight reduction and high transmission efficiency which has been...

   Hong Sun, Heng Li, ... Ming Wang Fu in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

5. Simulating Castable Aluminum Alloy Microstructures with AlloyGAN Deep Learning Model

   MaterialMaterials scientists have made progress in controlling alloy performance through microstructureMicrostructure quantification. However,...

   Biao Yin, Yangyang Fan in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

   Conference paper 2024
   

6. Research on the 5A06 Aluminum Alloy Thin-Walled Elbow in Cold Stam** Condition

   5A06 aluminum alloy exhibits low density, high strength, and excellent corrosion resistance, which is widely used in areas of the aerospace,...

   **aomin Huang, Ben Guan, Yong Zang in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

   Conference paper 2024
   

7. Resistance Rivet Welding of Aluminum Alloy and Steel with a Supplementary Plate

   A combination of self-pierce riveting and resistance spot welding, which is named resistance rivet-welding, was used to join aluminum alloy sheet and...

   Hongxin Shi, Shibo Zhu, ... Ranfeng Qiu in Journal of Materials Engineering and Performance

   Article 31 January 2024
   

8. AMAG CrossAlloy®—A Unique Aluminum Alloy Concept for Lightweighting the Future

   Increasing requirements to reduceReduce CO2 emissionsEmissions by using high scrap rates while maintaining the same high material properties...

   Florian Schmid, Lukas Stemper, Ramona Tosone in Light Metals 2023

   Conference paper 2023
   

9. Simulation of Dynamic Recrystallization in 7075 Aluminum Alloy Using Cellular Automaton

   The evolution of microstructure during hot deformation is key to achieving good mechanical properties in aluminum alloys. We have developed a...

   **aodong Zhao, Dongxing Shi, ... **aorong Yang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 17 April 2024

10. Influence of Mn on the precipitates in 6082 aluminum alloy

    The study systematically examined how Mn impacts the precipitates and mechanical properties of 6082 aluminum alloy during the peak state of...

    Cui Zhenjie, Jiang Haichang, ... Jia Luanluan in Journal of Materials Science

    Article 14 January 2024
    

11. FEA Materials—Aluminum Scandium Master Alloy Production Technology

    The production of AluminumAluminum ScandiumScandium (AlScAlSc) master alloyMaster alloy ranging between 2 and 8wt % is of interest because this alloy...

    Rick Salvucci, Brian Hunt, Eugene Prahin in Light Metals 2023

    Conference paper 2023
    

12. Ductile and Corrosion-Resistant Aluminum Alloy From Recycled Secondary Aluminum Scraps Containing Iron Impurities

    The alloy was produced by spray forming (SF) of aluminum scraps followed by rotary swaging (RS), and submitted to heat treatments (HT) at 773 K for...

    Brenda Juliet Martins Freitas, Guilherme Yuuki Koga, ... Claudemiro Bolfarini in Metallurgical and Materials Transactions B

    Article 05 June 2023
    

13. High corrosion and wear resistant electroless Ni-P gradient coatings on aviation aluminum alloy parts

    A Ni-P alloy gradient coating consisting of multiple electroless Ni-P layers with various phosphorus contents was prepared on the aviation aluminum...

    Bo Wang, Jiawei Li, ... Gang Yu in International Journal of Minerals, Metallurgy and Materials

    Article 26 January 2024

14. Methods and Technological Characteristics of Welding of Aluminum and Aluminum Alloy Machine Parts (Review)

    Abstract

    The welding characteristics of aluminum and aluminum alloy machine parts, as well as such welding methods as arc augmented laser welding,...

    A. E. Vertii in Steel in Translation

    Article 01 March 2023
    

15. Wear Resistance of Aluminum Alloy A356 After Thorough Anodic Oxidation

    The efficiency of thorough anodic oxidation of ASTM A356 aluminum alloy as an alternative to painting its surface is studied. Microstructure, phase...

    Aziz Bariş Başyiğit, Zeki Azakli, ... Osman Bican in Metal Science and Heat Treatment

    Article 01 September 2023
    

16. Impact of a Constant Magnetic Field on the Magnetoplastic Effect in V95pch Aluminum Alloy

    Abstract

    A comprehensive experimental study of the magnetoplastic effect in V95pch aluminum alloy aged in a weak constant magnetic field. Data is...

    J. V. Osinskaya, S. V. Voronin, ... I. I. Levin in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

    Article 01 February 2024
    

17. Nanoparticle-Enhanced Castability of Aluminum Alloy 2024: Fluidity, Hot Cracking, and Surface Quality

    Aluminum alloy 2024 provides high mechanical properties and good machinability for high-performance applications. However, the poor castability of...

    Guan-Cheng Chen, **aochun Li in Metallurgical and Materials Transactions A

    Article 29 December 2023
    

18. Study on Mechanical Properties of Hybrid Aluminum Alloy Formed by Rolling and Wire Arc Additive Manufacturing

    This paper designed several routes of heat treatment and wire arc additive manufacturing (WAAM) based on a rolled aluminum alloy plate 2219 to study...

    Zhongqi Yu, **aopeng Yu, ... Sule Feng in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

19. Hot Deformation Characteristics of 2024 Aluminum Alloy

    In this paper, the isothermal thermal compression simulation test of 2024 aluminum alloy was carried out. The deformation temperature is 573-723 K,...

    Fuwei Kang, **long Lu, ... Wei Jiang in Journal of Materials Engineering and Performance

    Article 07 March 2023
    

20. Fabrication of superhydrophobic aluminum alloy surfaces by nickel and phosphorus chemical deposition

    The special wettability of superhydrophobic aluminum alloys has a broad applied foreground in important industrial fields, such as aviation,...

    Ying Zhai, Mohamed Elshahat Mohamed, ... **aodong Yang in Journal of Materials Science

    Article 20 May 2024