Search

Search Results

1. Comparative Hot Corrosion Behavior of New Nickel-Based Superalloy Ad 730 and Inconel 718 in 75 wt.% Na₂SO₄ + 25 wt.% NaCl Molten Salt Medium at 700 °C

   The new superalloy Ad 730 is the next-generation material for aircraft turbine disks, but the hot corrosion behavior of this alloy remains to be...

   Qihang Zhou, Kaiyu Zhang, ... Lin Zhang in Journal of Materials Engineering and Performance

   Article 28 February 2024
   

2. Type-I Hot Corrosion of Ni-Base Superalloy CM247LC in Presence of Molten Na₂SO₄ Film

   Type-I hot corrosion behavior of CM247LC superalloy is evaluated in the air at 950 °C against low (3 to 4), intermediate (7 to 9), and high (12 to 14...

   Mahesh K. Kumawat, Chandrakant Parlikar, ... Dipak K. Das in Metallurgical and Materials Transactions A

   Article 04 November 2020
   

3. Invited Review Paper in Commemoration of Over 50 Years of Oxidation of Metals: Current Aspects of Deposit-Induced Corrosion

   Alloys and coatings used in high temperature applications are often subject to surface degradation influenced by the presence of deposits. Typical...

   G. H. Meier in Oxidation of Metals

   Article 11 January 2021
   

4. Hydrometallurgical Recovery of Zinc from By-Products and Waste Materials of Hot-Dip Galvanizing Process

   Like other industrial processes, hot-dip galvanizing of steel generates some by-products and wastes. Secondary materials contain a relatively high...

   Ewa Rudnik in Recycling Technologies for Secondary Zn-Pb Resources

   Chapter 2023
   

5. The Effects of Chromium on the High Temperature Corrosion of Ni–Cr Alloys Exposed to Calcium Sulfate

   Calcium- and sulfur-rich deposits have been linked to failure of turbine components as a consequence of high temperature exposures (> 1000 °C). There...

   Nicholas Ury, Vilupanur Ravi in High Temperature Corrosion of Materials

   Article 08 March 2024
   

6. High Temperature Corrosion Performance of HVOF and D-gun Formulated Cr₃C₂-NiCr and Rare Earth Element Doped Cr₃C₂-NiCr Coating on TP347H Austenite Steel

   The present research evaluates the microstructure and hot corrosion performance of HVOF and D-gun sprayed Cr ₃ C ₂ -25NiCr, and ceria (0.4 wt.%) blended...

   Harkulvinder Singh, Sukhpal Singh Chatha, Buta Singh Sidhu in Journal of Failure Analysis and Prevention

   Article 08 May 2024
   

7. Effect of electrode configuration on the mechanical-corrosion characteristics of welded AISI 2205 steel structure

   The study considered the effect of welding electrode composition on the mechanical and corrosion integrity of welded AISI 2205 duplex stainless steel...

   Ibrahim Momoh-Bello Omiogbemi, Danjuma Saleh Yawas, ... Sandip Ghosh Chowdhury in MRS Advances

   Article 11 January 2023
   

8. A review on atom probe and correlative microscopy studies of corrosion in nickel-based superalloys

   Abstract

   This article discusses challenges faced in the development of new Ni-based superalloys for applications in the hottest sections of turbine...

   C. Rodenkirchen, M. Appleton, ... S. Pedrazzini in MRS Bulletin

   Article Open access 01 July 2022
   

9. Corrosion Behaviour of Ni–Al Coated T23 Weldments at Elevated Temperatures

   The study investigates the high-temperature corrosion behaviour of Ni–Al coatings produced by the wire arc spraying technique on ASME SA T23 low...

   Madhulika Srivastava, Sagar Kumar Murmu, ... Shubrajit Bhaumik in Journal of Bio- and Tribo-Corrosion

   Article 02 April 2024
   

10. The Effect of Using Ferro-Alloy on the Properties of AlCoFeNiMoTi High-Entropy Alloy Produced by Arc-Melting Method: Design of Low Cost

    The cost of high-entropy alloys (HEAs) is one of the most major obstacles to their widespread use. The cost of these alloys with significant amounts...

    Seval H. Güler in International Journal of Metalcasting

    Article 09 February 2023
    

11. Effect of Pulse Current Frequency on Microstructure and Hot Corrosion Behavior of Tungsten Inert Gas-Welded Joints of N155 Superalloy

    Thin sheets of N155 superalloy with Inconel 718 filler metal were welded using tungsten inert gas (TIG) process with different frequencies of the...

    Amirkeyvan Rahimi, Morteza Shamanian, Masoud Atapour in Journal of Materials Engineering and Performance

    Article 17 May 2021
    

12. Reinterpretation of Type II Hot Corrosion of Co-Base Alloys Incorporating Synergistic Fluxing

    The components of gas-turbine engines operating in marine environments are highly susceptible to hot corrosion, which is typically classified as Type...

    J. M. Alvarado-Orozco, J. E. Garcia-Herrera, ... G. H. Meier in Oxidation of Metals

    Article 01 June 2018
    

13. Industrial Applications of Thermal Spray Technology

    In this last chapter of this book, a global evaluation of the progress of the thermal spray (TS) technology over the past few decades is presented...

    Maher I. Boulos, Pierre L. Fauchais, Joachim V. R. Heberlein in Thermal Spray Fundamentals

    Chapter 2021
    

14. Recent trends in coating processes on various AISI steel substrates: A review

    Various spraying techniques have been used to apply engineered coatings on different industrial parts and components. Enhancing the properties of...

    Naveen Kumar, Vikas Kumar Choubey in Journal of Materials Science

    Article 29 December 2023
    

15. Corrosion

    When dealing with metallic alloys, a chapter on high-temperature corrosion is mandatory. Oxidation and hot corrosion are the main phenomenological...

    Stefano Gialanella, Alessio Malandruccolo in Aerospace Alloys

    Chapter 2020
    

16. Corrosion Behavior of Ni-Based Metallic Coatings Deposited by Thermal Spray Method on Low Nickel Austenitic Stainless Steel

    The low nickel austenitic stainless steel (LNiASS) is more economical than the conventional 300-series austenitic stainless steels as 60% (approx.)...

    Ankush S. Marodkar, Ravindra V. Taiwade , Himanshu Vashishtha in Journal of Materials Engineering and Performance

    Article 07 September 2021
    

17. Combustion Spraying

    Combustion spraying, often referred to as “Flame spraying (FS),” is at the base of the wide field of thermal spray technologies, which was developed...

    Maher I. Boulos, Pierre L. Fauchais, Joachim V. R. Heberlein in Thermal Spray Fundamentals

    Chapter 2021
    

18. DC Plasma Spraying, Process Technology

    DC plasma spraying stands out as one of the most widely used thermal spray techniques for a broad range of applications including tribological and...

    Maher I. Boulos, Pierre L. Fauchais, Joachim V. R. Heberlein in Thermal Spray Fundamentals

    Chapter 2021
    

19. Duplex and Composite Coatings: A Thematic Review on Thermal Spray Techniques and Applications

    Thermal spraying is a broad terminology for a coating process in which materials are deposited in a spray of finely distributed liquefied or...

    M. Sathish, N. Radhika, Bassiouny Saleh in Metals and Materials International

    Article 01 October 2022
    

20. Tungsten Carbides

    Tungsten forms with carbon several chemical compounds (see also section C – W in Table I-2.13): tungsten monocarbide δ-WC1±x phase (hexagonal...

    Igor L. Shabalin in Ultra-High Temperature Materials IV

    Chapter 2022