Search

Search Results

1. Improving energy storage performance of sol-gel-derived PbZrO₃ thin films by adjusting the water/acetic acid solvent ratio

   Abstract

   PbZrO ₃ and PbZrO ₃ -based thin films as a typical antiferroelectric material have been widely studied for high-density energy storage...

   Zhao Yang Wen, Yu Bai, ... Zhan Jie Wang in Journal of Sol-Gel Science and Technology

   Article 08 April 2024
   

2. Amylose–Amylopectin Ratio

   Starch is a relevant biopolymer since it is easily modifiable and can be used as an alternative material to several petrochemical-based...

   Sharon Varghese, Monika Awana, ... Bejoy Thomas in Handbook of Biopolymers

   Reference work entry 2023
   

3. Tungsten trioxide-modified zeolite-based catalysts in the esterification of lactic acid: the effect of Si/Al ratio and WO₃ loadings

   Zeolite-supported tungsten oxide catalysts were studied in the gas phase esterification of lactic acid with alcohols in different reaction...

   Nekkala Nagaraju, Koppadi Kumaraswamy, ... Balla Putrakumar in Emergent Materials

   Article 19 June 2023
   

4. Selective leaching of lithium from spent lithium-ion batteries using sulfuric acid and oxalic acid

   Traditional hydrometallurgical methods for recovering spent lithium-ion batteries (LIBs) involve acid leaching to simultaneously extract all valuable...

   Haijun Yu, Dongxing Wang, ... Zhiqiang Liu in International Journal of Minerals, Metallurgy and Materials

   Article 16 April 2024

5. Amylose–Amylopectin Ratio

   Starch is a relevant biopolymer since it is easily modifiable and can be used as an alternative material to several petrochemical-based...

   Sharon Varghese, Monika Awana, ... Bejoy Thomas in Handbook of Biopolymers

   Living reference work entry 2022
   

6. Leaching of H2SO4, Citric Acid, and Malic Acid Leached Pb and Ag Residues (Electrohydrometallurgical Process)

   Different processing techniques are practiced to treat the inorganic (such as H2SO4) or organic acid (such as citric or malic acid) leached Pb–Zn...

   Muammer Kaya in Recycling Technologies for Secondary Zn-Pb Resources

   Chapter 2023
   

7. Polylactic Acid (PLA)

   Polylactic acid (PLA) is an excellent biopolymer that can be synthesized from renewable resources. It is a thermoplastic polyester generated from...

   Anju Paul, K. Sreedevi, ... V. N. Anjana in Handbook of Biopolymers

   Reference work entry 2023
   

8. Effect of Ca/Mg molar ratio on the calcium-based sorbents

   Steelmaking industry faces urgent demands for both steel slag utilization and CO ₂ abatement. Ca and Mg of steel slag can be extracted by acid...

   Yumeng Li, Qing Zhao, ... Ron Zevenhoven in International Journal of Minerals, Metallurgy and Materials

   Article 15 November 2023

9. Waste Lead-Acid Battery Recycling Technologies

   The growing of collected waste lead-acid batteryLead-Acid Battery (LAB) quantity means the growing demand for secondary lead (Pb) material for car...

   Mahmut Altiner, Soner Top, Sait Kursunoglu in Recycling Technologies for Secondary Zn-Pb Resources

   Chapter 2023
   

10. Synthesis of high aspect ratio copper nanowire using copper oxalate precursor

    Recently, metal nanowires have been actively researched as a novel form of conductive material for application in various electronic devices, and Cu...

    Yu-Kyung Kim, Young-** Yu, ... Jea-Young Choi in Journal of Materials Science

    Article 02 June 2024
    

11. Recovery of Lithium from Waste LIBs Using Sulfuric Acid Roasting and Water Washing

    LithiumLithium (Li) is one of the important elements used in the manufacturing of lithium-ion batteries (LIBs). In view of increasing demand of Li,...

    Manis Kumar Jha, Pankaj Kumar Choubey, ... Nityanand Singh in TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings

    Conference paper 2023
    

12. Intensifying Acid Leaching Behaviors of Fe, Ni, and Cr from Stainless-Steel Scraps via Ultrasonic Treatment

    Stainless steel has a broad application in various areas of the national economy, while a mass of stainless-steel scraps is generated during the...

    Yifei Zhang, Qianqian Chu, ... Yanfang Huang in Characterization of Minerals, Metals, and Materials 2024

    Conference paper 2024
    

13. Corrosion in Pb-Acid Batteries—Recent Developments

    Battery-based energy storage systems with high power/energy densities and excellent cycle efficiency are expected to play a key role in our everyday...

    Marco Cattelan, Marco Mazzucato, Christian Durante in Corrosion and Degradation in Fuel Cells, Supercapacitors and Batteries

    Chapter 2024
    

14. Separation of Scandium by Phosphinic Acid Extractant from Sulfuric Acid Solution

    The main challenge for scandiumSc(III) extraction from bauxite residueBauxite residue by hydrometallurgyHydrometallurgy is the separation step. After...

    Amilton Barbosa Botelho Junior, Denise Crocce Romano Espinosa, Jorge Alberto Soares Tenório in Rare Metal Technology 2022

    Conference paper 2022
    

15. Preparation and characterization of a novel pH-sensitive pectin-grafted-poly (acrylic acid-co-itaconic acid)/MWCNTs-COOH hydrogel composite for adsorption and controlled release of diclofenac sodium

    In the present study, a novel pH-sensitive hydrogel composite of pectin-grafted-poly (acrylic acid-co-itaconic acid)/MWCNTs-COOH was prepared by...

    Wissam L. Penyan, Layth S. Jasim in Carbon Letters

    Article 11 March 2024
    

16. Polylactic Acid (PLA)

    Polylactic acid (PLA) is an excellent biopolymer that can be synthesized from renewable resources. It is a thermoplastic polyester generated from...

    Anju Paul, K. Sreedevi, ... V. N. Anjana in Handbook of Biopolymers

    Living reference work entry 2022
    

17. Bio-based epoxy vitrimer: fast self-repair under acid-thermal stimulation

    Acylhydrazone bonds can participate in dynamic exchange reactions under acid-stimulated conditions, and disulfide bonds can participate in dynamic...

    Yanna Zhao, **aowei Bai, ... Wentong Hou in Journal of Materials Science

    Article 19 June 2024
    

18. Effects of S/EB ratio on some properties of PLA/SEBS blends

    Poly(lactic acid) (PLA)/styrene- b -(ethylene- co -butylene)- b -styrene (SEBS) blends were prepared by using two different SEBS polymers with different...

    İ Ekiz, M S Cetin, ... H A Karahan Toprakci in Bulletin of Materials Science

    Article 17 December 2022
    

19. Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry with Re-Engineered 2, a 5-Dihydroxypheny Acid Derivative

    Matrix-assisted laser desorption ionization (MALDI) has been a mainstay in protein mass spectrometry, imaging, and proteomics. The common approach to...

    Sajid Bashir, M. Gomez, ... P. J. Derrick in Advanced Materials for Multidisciplinary Applications

    Chapter 2024
    

20. A Novel Multiphase Stainless Steel with Ultra-Low Yield Ratio and High Ductility

    This study focuses on develo** a novel multiphase stainless steel with enhanced ductility and an ultralow yield ratio achieved through...

    Menghao Liu, Cuiwei Du, ... **aogang Li in Acta Metallurgica Sinica (English Letters)

    Article 25 June 2024