Search
Search Results
-
Development of a Modified Gurson–Tvergaard–Needleman Damage Model Characterizing the Strain-Rate-Dependent Behavior of 6061-T5 Aluminum Alloy
It is of vital importance to improve the lightweight and crash safety of automobiles to accurately characterize the fracture features of automotive...
-
Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion
Additive manufacturing provides alternative solutions for complex geometry and design freedom for the customization of aluminum alloys, while the...
-
Research progress on microstructure tuning of heat-resistant cast aluminum alloys
With development of present energy-saving society, lightweight and green development in the automotive and aerospace industries have put forward...
-
Effect of Plastic Anisotropy on the Kinetics of Static Softening in AA2024–T3 Aluminum Alloy
The influence of plastic anisotropy on the static softening kinetics after cold forming in the AA2024–T3 aluminum alloy sheet was investigated. The...
-
Microstructural Evolution and Mechanical Properties of a Continuously Cast Al–Mg–Si–Cu Alloy Processed by Repetitive Continuous Extrusion Forming
A continuously cast Al–Mg–Si–Cu alloy was processed by repetitive continuous extrusion forming (R-Conform) and the corresponding deformation...
-
The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy
Lost-foam casting (LFC) is one of the most straightforward techniques to produce complex shaped parts with intricate geometries. However, obtained...
-
Materials Development
It is well known that the trade-off relationship exists between strength and ductility in metallic materials. We developed technologies to obtain... -
Ultrasonic effects on microstructures and mechanical properties of friction stir weld joints of dissimilar AA2024/AZ31B alloys
Friction stir welding (FSW) and ultrasonic vibration-assisted FSW (UVaFSW) experiments of AA2024 aluminum alloy and AZ31B magnesium alloy plates with...
-
Fatigue Response of Aluminum 7075-T6 Joints through Inclusion of Al2O3 Particles to the Weld Nugget Zone during Friction Stir Spot Welding
This study intends to evaluate tensile and fatigue responses of aluminum 7075-T6 joints in the absence and presence of Al 2 O 3 particles introduced...
-
Plasticity, Formability, and Materials
This chapter begins with the definitions of plasticity and formability from a manufacturer’s perspective. The stress–strain curve is illustrated with... -
Aircraft Aluminum Alloys: Applications and Future Trends
Within the last century aluminum alloys have played a strategic role in the manufacturing and development of lightweight aircraft structures. Years... -
Intergranular corrosion behavior of extruded 6005A alloy profile with different microstructures
The intergranular corrosion (IGC) behavior of an extruded 6005A alloy profile with the coexisting of peripheral coarse grain (PCG) structure and...
-
Microstructure and Mechanical Properties of 6005A-T5 Aluminum Alloy Welded Joints by Friction Stir Welding and Metal Inert Gas Welding
The 6005A-T5 aluminum alloy welded joints were prepared by use of friction stir welding (FSW) and metal inert gas welding (MIG). The difference in... -
Current status and development of external energy-assisted friction stir welding processes: a review
This paper summarizes the status of various external energy-assisted friction stir welding techniques developed till date. Preheating the workpiece...
-
A systematic analysis of maximum tolerable tool wear in friction stir welding
Friction stir welding (FSW) is a solid-state joining process with a wide range of applications in the E-mobility, automotive, aerospace and energy...
-
Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
This review summarizes the recent research progress on the post-processing techniques to improve the as-built metallic structure fabricated by...
-
Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding, friction stir vibration welding and tungsten inert gas welding: A comparative study
This study compared the microstructure and mechanical characteristics of AA6061-T6 joints produced using friction stir welding (FSW), friction stir...
-
Alloys for Aircraft Structures
This chapter deals with the metallic materials used for structural aircraft components. The main features of fixed-wing aircrafts will be recalled,... -
Effect of Extrusion Parameters on Microstructural and Mechanical Properties of EN AW 6063
ExtrusionExtrusion is a plastic formingForming process that uses cylinder shaped raw materials. Direct extrusionExtrusion method which is one of the... -
Cold Spray
Since its recognition in the mid-1980s, credited to a group of scientists from the Institute of Theoretical and Applied Mechanics of the Siberian...