Search

Search Results

1. Effect of Shot Blasting on the Boriding Kinetics of AISI 316L Stainless Steel

   Abstract

   In this study, the effect of shot blasting on boriding kinetics of AISI 316L stainless steel alloy was investigated. For this purpose, AISI...

   Safiye İpek Ayvaz, İbrahim Aydın, Ali İhsan Bahcepınar in Protection of Metals and Physical Chemistry of Surfaces

   Article 01 August 2023
   

2. Corrosion Resistance of 316L Stainless Steel in HCL and FeCl3

   Stainless steelStainless steel containers made from annealed 316L316L are used for storing radioactive laboratory wastesWaste including disposable...

   ThankGod Nwokocha, T. David Burleigh in TMS 2024 153rd Annual Meeting & Exhibition Supplemental Proceedings

   Conference paper 2024
   

3. Effect of Strain Hardening on Wear and Corrosion Resistance of 316L Austenitic Stainless Steel

   The wear and corrosion resistance of 316L austenitic stainless steel after strain hardening were studied. 316L austenitic stainless steel was...

   Guoqing Sun, Jiaqi Huang, ... Wang** Wu in Journal of Materials Engineering and Performance

   Article 01 August 2023
   

4. Microwave Butt Joining of Stainless Steel (SS-316L) With an SS-316L Powder

   In the present work, the microwave-assisted butt joining of austenite stainless steel (SS-316L) with an SS-316L filler was investigated. The...

   D. S. Sahota, Amit Bansal, Vinod Kumar in Transactions of the Indian Institute of Metals

   Article 20 June 2023
   

5. Experimental of Hot Machining for Stainless Steel 316L Cutting Process

   Stainless Steel 316L having excessive tensile power and resistance to temperature with excessive manganese content resulting high roughness during...

   Nur Cholis, M. A. H. Yusoff, ... Ahmad R. Yusoff in Intelligent Manufacturing and Mechatronics

   Conference paper 2024
   

6. Characterization of AISI 316L Stainless Steel/Low Alloy Steel Resistance Spot Dissimilar Weld

   Resistance spot welding was used to join AISI 316L stainless steel to DIN 33MnCrB5-2 low alloy steel using Ni powder interlayer and foil of ERNiCr-3...

   Muhaed Alali, Maysaa G. Alnaffakh in Metallography, Microstructure, and Analysis

   Article 09 August 2023
   

7. Analysis of Edge Crack Defect Analysis and Control of 316L Austenitic Stainless Steel

   During the hot deformation process, austenitic stainless steel is prone to defects such as edge cracking and edge damage. The effects of heating...

   Meiling Liu, ** Su, ... Qiwei Chen in Metallography, Microstructure, and Analysis

   Article 18 July 2023
   

8. EBSD Analysis of 316L Stainless Steel Weldment on Fusion Reactor Vacuum Vessel

   The nonuniformity of microstructure and properties of welded joints of thick plate are abroad attention by people in the field of nuclear industry...

   **aowei **a, Jiefeng Wu, ... Haibiao Ji in Transactions of the Indian Institute of Metals

   Article 24 June 2023
   

9. TRIP effect produced by cold rolling of austenitic stainless steel AISI 316L

   This study aims to study the transformation-induced plasticity (TRIP) by cold rolling in AISI 316L grade ASTM F138: 2019 (biomedical material) and...

   Ricardo Luiz Perez Teixeira, José Carlos de Lacerda, ... Andréia Bicalho Henriques in Journal of Materials Science

   Article 03 February 2023
   

10. Microstructure and Properties of Laser Surface Melted AISI 316L Stainless Steel

    The present study aims to understand the influence of laser parameters (applied power density and scan speed) on microstructure, surface mechanical...

    Sharath Anishetty, Tapas Bera, ... Indranil Manna in Journal of Materials Engineering and Performance

    Article 13 May 2024
    

11. Tribological Performance of Textured 316L Stainless Steel Prepared by Selective Laser Melting

    Selective laser melting (SLM) is a rapid prototy** additive manufacturing technology that has been widely utilized in the biomedical field. Surface...

    ** Chen, Kangning **, ... Weixu Yang in Journal of Materials Engineering and Performance

    Article 13 December 2023
    

12. Failure Analysis of the Handle of Stainless Steel Cathode Blank in Copper Electroforming Process: Cu Core Connection to 316L Stainless Steel Sheath

    Copper electroforming units around the world use 316L stainless steel (SS) cathode blanks. Cathodes play an essential role in the operating costs of...

    F. Rostamzadeh, G. R. Khayati, ... N. Assadat Yaghubi in Journal of Failure Analysis and Prevention

    Article 07 April 2023
    

13. Improving Fatigue Properties of 316L Stainless Steel Welded Joints by Surface Spinning Strengthening

    The surface spinning strengthening (3S) mechanism and fatigue life extension mechanism of 316L stainless steel welded joint were systematically...

    Dongqiqiong Wang, Qiang Wang, ... Zhefeng Zhang in Acta Metallurgica Sinica (English Letters)

    Article 29 February 2024
    

14. Effect of Shot Peening on Microstructure and Mechanical Properties of 316L Stainless Steel Prepared by 3D Printing with Different Forming Angles

    This paper employs OM, XRD, EBSD and mechanical properties testing to investigate the influence of shot peening on the microstructure and mechanical...

    Haijun Pan, Zheng Wang, ... Zhihui Cai in Journal of Materials Engineering and Performance

    Article 20 July 2023
    

15. Achieving a high-strength dissimilar joint of T91 heat-resistant steel to 316L stainless steel via friction stir welding

    The reliable welding of T91 heat-resistant steel to 316L stainless steel is a considerable issue for ensuring the safety in service of...

    Zhiwei Wang, Min Zhang, ... Zongyi Ma in International Journal of Minerals, Metallurgy and Materials

    Article 25 November 2022

16. Microstructural Evolution and Strengthening Mechanism in Laser Powder Bed Fusion 316L Stainless Steel with High Strength and Ductility

    This paper demonstrates an exceptional combination of ultimate tensile strength and elongation in austenitic 316L stainless steel fabricated by...

    Houqiang Wang, Hui Li, ... Li Hu in Journal of Materials Engineering and Performance

    Article 24 June 2024
    

17. Microstructure and Mechanical Properties of 3D-Printed 316L Stainless Steel at Different Shot Peening Durations

    In this paper, the effects of 3D-printed 316L stainless steel at different shot peening (SP) durations have been compared in terms of microstructure...

    Haijun Pan, Wenyu Tao, ... Zhihui Cai in Journal of Materials Engineering and Performance

    Article 18 October 2023
    

18. Numerical Simulation of Thermal Dynamic Behavior and Morphology Evolution of the Molten Pool of Selective Laser Melting BN/316L Stainless Steel Composite

    A three-dimensional numerical model of SLM BN/316L stainless steel composites was established by the Finite Volume Method (FVM), considering the...

    Lin Liu, Tubin Liu, ... Mingli Qin in Journal of Materials Engineering and Performance

    Article 15 May 2023
    

19. 316L Stainless-Steel Carburizing Close to Eutectic Transformation Using the Spark Plasma Sintering Process

    This work focuses on the 316L austenitic stainless-steel case-hardening microstructure, after the SPS process near the solid/liquid state transition...

    Yoann Pinot, Aurélien Besnard, ... Florian Bussière in Journal of Materials Engineering and Performance

    Article 26 March 2024
    

20. Study of Microbiologically Influenced Corrosion of the Welded Stainless Steel 316L

    Microorganisms are acknowledged to be responsible for corrosion failures worldwide; however, some recent studies have indicated that in some...

    Ahmad Nejad Ababaf, Esmaeil Jafari in Journal of Materials Engineering and Performance

    Article 20 March 2023