Search

Search Results

1. Effect of Multipass on Microstructure and Intergranular Corrosion Behavior of DSS 2205 Shielded Metal Arc Weld Thick Sections

   Duplex stainless steel (DSS) consists of dual structure, austenite and ferrite in equal proportion, which exhibits excellent resistance to corrosion....

   Sagarkumar I. Shah, Hemantkumar R. Thakkar, ... G. D. Acharya in Transactions of the Indian Institute of Metals

   Article 18 March 2022
   

2. Corrosion Resistance of CoCrFeMnNi High Entropy Alloy Compared with 2205 Duplex Stainless Steel in a Simulated Concrete Pore Solution

   The comparison of corrosion resistance between CoCrFeMnNi high entropy alloy (HEA) and 2205 duplex stainless steel (DSS) in a simulated concrete pore...

   Y. Q. Zeng, M. Zhu, ... S. Y. Guo in Journal of Materials Engineering and Performance

   Article 12 April 2023
   

3. Quantitative micro-electrochemical study of duplex stainless steel 2205 in 3.5wt% NaCl solution

   Duplex stainless steels (DSSs) are suffering from various localized corrosion attacks such as pitting, selective dissolution, crevice corrosion...

   Shuangyu Cai, Keke Lu, ... Ying ** in International Journal of Minerals, Metallurgy and Materials

   Article 06 October 2022

4. Influence of the GMAW transfer mode on the mechanical behaviour and corrosion resistance of the 316L-2205 dissimilar weld

   This work presents the mechanical behaviour and corrosion resistance of dissimilar welds between duplex stainless steel (DSS) 2205 and austenitic...

   T. del N. J. Sánchez-Cruz, V. H. López-Morelos, ... H. Granados-Becerra in MRS Advances

   Article 13 November 2023
   

5. Deformation Mechanism of Bimodal Structured 2205 Duplex Stainless Steel in Two Yield Stages

   A kind of micro/nanostructured 2205 duplex stainless steel (DSS) with uniform distribution of nanocrystals was prepared via aluminothermic reaction...

   Jie Sheng, Mingchen Du, ... Peiqing La in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 16 January 2023

6. High throughput screening of localised and general corrosion in type 2205 duplex stainless steel at ambient temperature

   Bipolar electrochemistry is used to produce a linear potential gradient across a bipolar electrode (BPE), providing direct access to the anodic and...

   Yiqi Zhou, Sultan Mahmood, Dirk Lars Engelberg in International Journal of Minerals, Metallurgy and Materials

   Article 01 December 2023

7. Influence of SAW Flux Ingredients on Chemical Compositions of Weldments of Duplex Steel-2205

   Duplex stainless steel (DSS) mainly consists of ferrite and austenite. DSS finds wide uses in offshore applications, due to its admirable mechanical...

   Deepak Gupta, Amit Bansal, Sandeep **dal in Transactions of the Indian Institute of Metals

   Article 24 June 2024
   

8. Characteristics of Cracking Propagation During Sulfide Stress Corrosion of Hot-Rolled Duplex Stainless Steel 2205

   Duplex stainless steels are generally selected for applications where resistance to corrosion is the most important criteria. Several duplex...

   A. C. Gonzaga, T. S. Barros, ... S. S. M. Tavares in Journal of Failure Analysis and Prevention

   Article 27 December 2023
   

9. Comparative statistical analysis of pitting in Two 2205 duplex stainless steel variants

   The inherent variability of pitting poses challenges in accurately evaluating the pitting resistance due to potential disparities in test results....

   Guoyong Ran, Wenrui Tu, ... Yangting Sun in npj Materials Degradation

   Article Open access 19 March 2024
   

10. Investigation of Microstructure and Mechanical Properties of DSS 2205 Weld Thick Section for Pressure Vessel Application

    Number of Industries including marine, oil and gas, pharmaceutical are facing challenges in welding of thick section duplex stainless steel (DSS) to...

    Sagarkumar I. Shah, Hemantkumar R. Thakkar, ... G. D. Acharya in Transactions of the Indian Institute of Metals

    Article 07 June 2021
    

11. Influence of High-Velocity Oxy-fuel Sprayed Cr₃C₂-NiCr Coating on Corrosion and Wear Properties of AISI 2205

    In this study, Cr ₃ C ₂ /10%NiCr layer was deposited on the AISI 2205 duplex stainless steel by the HVOF technique. Microstructural, tribological and...

    Rasim Göker Işık, Burçin Özbay Kısasöz, ... Alptekin Kısasöz in Journal of Materials Engineering and Performance

    Article 25 March 2024
    

12. Surface Roughness Increasing of 2205 Duplex Stainless Steel Using Ultrasonic Cavitation Process

    This research discusses an invented and helpful application of the ultrasonic cavitation process to increase the surface roughness of 2205 duplex...

    F. Alkhaleel, S. R. Allahkaram in Metallurgical and Materials Transactions A

    Article 05 December 2023
    

13. Study and Characterization of Sigma Phase in Duplex Stainless Steel 2205 (03Kh22N6M2)

    A study of sigma phase formation, its characterization, and its effect on the properties of duplex stainless steel 2205 are presented. The steel has...

    Reena Nagar, Krunal Kumar Patel, Anil Parmar in Metal Science and Heat Treatment

    Article 01 January 2024
    

14. Improved Surface Morphology and Corrosion Resistance Performance of 2205 Duplex Stainless Steel by Low Temperature Gas Nitriding

    This paper investigates the effect of low temperature gas nitriding on surface properties of 2205 duplex stainless steel performed at 400 °C with the...

    Nsikan Etim Dan, Patthi Bin Hussain, ... Ajit Behera in Journal of Bio- and Tribo-Corrosion

    Article 29 August 2022
    

15. Nondestructive Evaluation by Eddy Current and Ultrasonic Technique of 475°C Embrittlement Effects in DSS Duplex Stainless Steels and Corrosion Behavior

    Abstract

    In this paper, a nondestructive evaluation of the embrittlement effect in duplex stainless steel DSS 2205 aged from 5 to 100 h at a...

    R. Ghis, A. Hammouda, ... A. Benmoussat in Russian Journal of Nondestructive Testing

    Article 01 March 2023
    

16. Effect of Temperature on Resistance to Pitting Corrosion in Duplex Stainless Steel 2205 Welds

    Potentiodynamic polarization was applied to study the electrochemical behavior of AISI 2205 duplex stainless steel welds and their resistance to...

    Y. Martinez-Galvan, L. Dzib-Perez, ... J. Gonzalez-Sanchez in Materials Science

    Article 01 May 2023
    

17. Thickness-Dependent Microstructure and its Effect on Anisotropic Mechanical Properties of Duplex Stainless Steel 2205 Multi-pass Welded Joints

    In this study, the thickness-dependent microstructural characteristics of duplex stainless steel 2205 multi-pass welded joints were first...

    Zhilong Dong, Xue-Fang **e, ... Yu Wan in Acta Metallurgica Sinica (English Letters)

    Article 18 August 2023
    

18. Electron Backscattered Diffraction Analysis Across the Welded Interface of Post Weld Heat Treated 2205 Duplex Stainless-Steel and 316L Austenitic Stainless-Steel Dissimilar Weldment

    In the present work, the effect of post weld heat treatment (PWHT) on the microstructure and micro-texture evolution in 316L austenitic stainless...

    Aman Gupta, Krishna Kamlesh Verma, ... Rajesh Khatirkar in Journal of Materials Engineering and Performance

    Article 10 October 2022
    

19. Effect of electrode configuration on the mechanical-corrosion characteristics of welded AISI 2205 steel structure

    The study considered the effect of welding electrode composition on the mechanical and corrosion integrity of welded AISI 2205 duplex stainless steel...

    Ibrahim Momoh-Bello Omiogbemi, Danjuma Saleh Yawas, ... Sandip Ghosh Chowdhury in MRS Advances

    Article 11 January 2023
    

20. Effect of Shot Peening on the Corrosion and Wear Resistance of 2205 Duplex Stainless Steel

    The effects of shot peening on the corrosion and wear resistance of 2205 duplex stainless steel were studied. The results indicated that there were...

    Yi Wu, Yonghai Kang, Youming Chen in Journal of Materials Engineering and Performance

    Article 09 September 2022